journal article·2001-07

Processing, microstructure, and properties of Mg–SiC composites synthesised using fluxless casting process

S.C.V. Lim, M. Gupta, L. Lu

Materials Science and Technology· Volume 17· Issue 7
Publisher page

Abstract

In the present study, elemental magnesium and magnesium–silicon carbide composites were synthesised using the methodology of fluxless casting followed by hot extrusion. Microstructural characterisation studies revealed low porosity and a completely recrystallised matrix in every material. The average size of the recrystallised grains was found to decrease with an increasing presence of SiC particulates. For the reinforced magnesium, fairly uniform distribution of SiC particulates and good SiC–Mg interfacial integrity was realised. The results of X-ray diffraction studies indicated the absence of oxide phases and no evidence of interfacial reaction products except in the case of Mg–26.0 wt-%SiC sample. Results of physical and mechanical properties characterisation revealed that an increase in the amount of SiC particulates incorporated leads to an increase in macrohardness and elastic modulus, which does not affect the 0.2% yield strength and reduces the ultimate tensile strength, ductility, and coefficient of thermal expansion. The weight percentage of SiC particulates when plotted against hardness and 0.2% yield strength revealed a linear correlationship. An attempt is made to investigate the effect of increasing amount of SiC particulates on the microstructural features, and physical and mechanical properties of the magnesium matrix.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical and Production Engineering National University of Singapore, 10 Kent Ridge Crescent, Singapore, 119260. mpegm@nus.edu.sg

References (47)

Show source-provided references
1. 10.1179/imr.1994.39.1.110.1179/imr.1994.39.1.1 ↗
2. LEE D. M., , SUB B. K., , KIM B. G., , LEE J. S., , and LEE C. H.: Mater. &I Tee/ma, 1997, 13, 590–595.
3. LHO A.: Metall Mater. Trans. A, 1995, 26A, (9), 2445–2455.10.1007/BF02671259 ↗
4. Lo J. and CARPENTER G.: Proc. 5th Int. Conf. on ‘Composites engineering’ Las Vegas USA July 1998 International Community for Composites Engineering 526.
5. 10.1007/BF0054157810.1007/BF00541578 ↗
6. EBERT T. MOLL F. and KAINER K. U.: Powder Metall. 1997 40 126–130.10.1179/pom.1997.40.2.126 ↗
7. SARAVANAN R. A., and SURAPPA M. K.: Mater. Sci. Eng. A, 2000, A276, 108–116.
8. 10.1016/S0025-5408(99)00120-810.1016/S0025-5408(99)00120-8 ↗
9. TOWLE D. J., and FRIEND c. M.: Mater. Sci Eng. A, 1994, A188, 153–158.
10. nu L., and WANG E.: Mater. Sci Eng. A, 2000, A278, 267–271.
11. GUPTA M., , LAI M. O., and c. v. soo: Mater. Sci Eng. A, 1996, A210, 114–122.
12. ‘Powder diffraction file’ Online Resource International Centre for Diffraction Data Swarthmore PA USA 1991.
13. THOMSON W.: ‘Theory of vibrations with applications’ 4th edn 281-283; 1993 Englewood Cliffs NJ Prentice Hall.
14. 10.1016/0036-9748(86)90210-310.1016/0036-9748(86)90210-3 ↗
15. HALPIN J. C.: ‘Primer on composite materials: analysis’ 130; 1984 Lancester PA Technomic.
16. CHRISTMAN N. and SURESH S.: Acta Metall. 1988 36 1691–1704.10.1016/0001-6160(88)90236-2 ↗
17. 10.1016/0956-716X(91)90080-K10.1016/0956-716X(91)90080-K ↗
18. HUMPHREYS F. J. and HATHERLY M.: Recrystallisation and related annealing phenomena’ 1st edn 261-275; 1995 Oxford Pergamon.10.1016/B978-0-08-041884-1.50008-8 ↗
19. SHEWMON P. G.: ‘Transformation in metals’ 69–125; 1969 New York NY McGraw-Hill.
20. 10.1007/BF0036759110.1007/BF00367591 ↗
21. 10.1016/0956-716X(94)90270-410.1016/0956-716X(94)90270-4 ↗
22. 10.1007/BF0050633410.1007/BF00506334 ↗
23. WANG z. G., , LI S., , and SUN L., : Key Eng. Mater., 1995, 104-107, 729–748.
24. 10.1007/BF0115495210.1007/BF01154952 ↗
25. 10.1007/BF0240266010.1007/BF02402660 ↗
26. 10.1007/BF0054444810.1007/BF00544448 ↗
27. SMITHELLS J.: ‘Metals reference book’ 5th edn 942 975; 1976 London Butterworths.
28. SHACKELFORD J. F. ALEXANDER W. and PARK J. S.: ‘CRC materials science and engineering handbook’ 304; 1994 Boca Raton FL CRC Press.
29. 10.1023/A:100470632173110.1023/A:1004706321731 ↗
30. GEIGER L., and JACKSON M.: Adv. Mater. Process., 1989, 136, 23–30.
31. 10.1016/S0261-3069(97)00051-410.1016/S0261-3069(97)00051-4 ↗
32. BOCCHINI G. F.: Int. J. Powder Metall. Powder Technol, 1986, 22, 185–202.
33. 10.1515/HTMP.1998.17.4.23710.1515/HTMP.1998.17.4.237 ↗
34. FOUGERE G. E., , RIESTER L., , FERBER M., , WEERTMAN J. R., , and SIEGEL R. W.: Mater. Sci Eng. A, 1995, A204, 1–6.
35. 10.1515/JMBM.1993.4.2.11910.1515/JMBM.1993.4.2.119 ↗
36. GUPTA M., and SURAPPA M. K., : Key Eng. Mater., 1995, 104-107, 259–274.
37. DAVIS J. R. ALLEN P. LAMPMAN S. R. and ZORC T. B.: ‘Properties and selection: nonferrous alloys and special purpose materials’ ASM handbook vol. 2 1132-1135; 1990 Materials Park OH ASM International.
38. 10.1016/0956-716X(93)90380-B10.1016/0956-716X(93)90380-B ↗
39. 10.1007/BF0281167910.1007/BF02811679 ↗
40. 10.1016/0010-4361(93)90174-710.1016/0010-4361(93)90174-7 ↗
41. 10.1007/BF0322109710.1007/BF03221097 ↗
42. 10.1179/mst.1993.9.10.85310.1179/mst.1993.9.10.853 ↗
43. DIONNE s. and KRISHNADEV M. R.: Proc. Int. Conf. on ‘Fabrication of particulates reinforced metal composites’ 267-270; 1990 Materials Park OH ASM International.
44. GUPTA M.: Alum. Trans., 1999, 1, 33–39.
45. 10.1007/BF0322240710.1007/BF03222407 ↗
46. REED-HILL R. E.: ‘Physical metallurgy principles’ 2nd edn 267-325 753-755; 1964 New York NY Van Nostrand.
47. 10.1007/BF0266737110.1007/BF02667371 ↗