journal article·2001-02

Microstructure and mechanical properties of C–Si–Mn(–Nb) TRIP steels after simulated thermomechanical processing

I.B. Timokhina, E.V. Pereloma, P.D. Hodgson

Materials Science and Technology· Volume 17· Issue 2
Publisher page

Abstract

Continuous and discontinuous cooling tests were performed using a quench deformation dilatometer to develop a comprehensive understanding of the structural and kinetic aspects of the bainite transformation in low carbon TRIP (transformation induced plasticity) steels as a function of thermomechanical processing and composition. Deformation in the unrecrystallised austenite region refined the ferrite grain size and increased the ferrite and bainite transformation temperatures for cooling rates from 10 to 90 K s-1. The influence of niobium on the transformation kinetics was also investigated. Niobium increases the ferrite start transformation temperature, refines the ferrite microstructure, and stimulates the formation of acicular ferrite. The effect of the bainite isothermal transformation temperature on the final microstructure of steels with and without a small addition of niobium was studied. Niobium promotes the formation of stable retained austenite, which influences the mechanical properties of TRIP steels. The optimum mechanical properties were obtained after isothermal holding at 400°C in the niobium steel containing the maximum volume fraction of retained austenite with acicular ferrite as the predominant second phase.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. LEHOUILIER R. · Metall. Trans. A · 1971 · 2 · 264510.1007/BF02814908 ↗
2. 10.1007/BF0265830910.1007/BF02658309 ↗
3. 10.2355/isijinternational1966.27.57010.2355/isijinternational1966.27.570 ↗
4. ITAMI A. · LW Int · 1995 · 35 · 1121
5. 10.1179/mst.1995.11.11.111610.1179/mst.1995.11.11.1116 ↗
6. HODGSON P. D. · Mater. Sci. Forum · 1998 · 284
7. FUJIWARA K. · Mater. SW. Forum · 1998 · 284
8. THILLOU V. · Mater. Sci Forum · 1998 · 284
9. X. LIU, P. KARJALAINEN, and J. PERTTULA: in 'Physical simulation of casting, hot rolling and welding', (ed. H. G. Suzuki et al.), 237–245; 1997, Tokyo, Asahi.
10. BOUET M. · Mater. SW. Forum · 1998 · 284
11. T. GLADMAN: 'The physical metallurgy of microalloyed steels'; 1997, London, The Institute of Materials.
12. BAI D. Q. · Mater. SW. Forum · 1998 · 284
13. A. ZAREI-HANZAKI: 'Transformation characteristics of Si— Mn TRIP steels after thermomechanical processing', PhD thesis, McGill University, Montreal, Canada, 1994.
14. 10.2355/isijinternational.31.134810.2355/isijinternational.31.1348 ↗
15. G. E. LUCAS, J. W. SHECKHERD, and G. R. OBETTE: in 'The use of small-scale specimens for testing irradiated material', STP 888, 112–140; 1986, Philadelphia, PA, ASTM.10.1520/STP32998S ↗
16. E. V. PERELOMA, I. B. TIMOKHINA, and P. D. HODGSON: Proc. Int. Conf. on `Thermomechanical processing of steels', Vol. 2, 418–427; 2000, London, IoM Communications.
17. 10.1016/S0921-5093(99)00325-110.1016/S0921-5093(99)00325-1 ↗
18. 10.1007/BF0267256410.1007/BF02672564 ↗
19. H. K. D. H. BHADESHIA: 13ainite in steels', 245–282; 1992, London, The Institute of Materials.
20. 10.1007/BF0291435310.1007/BF02914353 ↗
21. 10.1007/BF0264239110.1007/BF02642391 ↗
22. 10.2320/matertrans1989.32.68910.2320/matertrans1989.32.689 ↗
23. HULKA K. · ISS Mech. Work. Steel Process. Conf · 1999 · 37 · 67