journal article·1994-07

Texture gradient, average texture, and plastic anisotropy in various AI–Li sheet alloys

X. H. Zeng, M. Ahmad, O. Engler

Materials Science and Technology· Volume 10· Issue 7
Publisher page

Abstract

The variation of texture through the thickness and the average texture of sheet material of recrystallised AA 8090 and unrecrystallised AA 8090 (crossrolled) and AA 2090 AI–Li alloys have been investigated. Conventional (lithium free) AA 2024 alloy in the annealed condition was used as a reference material. The quantitative orientation distribution functions were determined via X -ray diffraction and neutron diffraction techniques. Using X -ray diffraction, textures of layers at various distances from the surface to the centre of the sheets were examined to achieve the texture gradients. The average textures were determined either via neutron diffraction using cylindrical stacked specimens or by summing the texture results obtained via the X-ray techniquefor the various layers. It is shown that the intensity of the common rolling textures, i.e. {112} <111>, {123} <634>, {110} <112>, and shear texture {100} <011> markedly varied through the thickness of unrecrystallised AA 8090 and AA 2090 AI–Li sheets. Also, in recrystallised AA 8090 AI–Li and AA 2024, a variation of the recrystallisation texture components {001} <100> and {011} <100> through the thickness was found. The quantitative texture data in conjunction with Taylor theory were used to predict the plastic anisotropy in terms of the plastic strain ratio as afunction of the angle a between the rolling and tensile directions. This prediction shows that the effects of texture can explain well the anisotropy in recrystallised AI–Li material (AA 8090). For unrecrystallised materials (AA 8090, AA 2090), a correct trend in plastic anisotropy is predicted; however, the calculated values in the 45° direction are larger than those determined experimentally.MST/1910
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. M. J. BULL and D.J. LLOYD: in Proc. Conf. Aluminium-lithium alloys III', (ed. C. Baker et al.), 402; 1986, London, The Institute of Metals.
2. PETERS M. · Metall. · 1986 · 20 · 25910.1016/0036-9748(86)90138-9 ↗
3. 10.1007/BF0264928910.1007/BF02649289 ↗
4. M. AHMAD and B. JAENSSON: in Proc. Conf. 'Advanced aluminium and magnesium alloys', (ed. T. Khan and G. Effenberg), 197–207; 1990, Materials Park, OH, ASM.
5. B. JAENSSON and M. AHMAD: in Proc. Conf. Aluminium-lithium alloys 6', (ed. M. Peters and P.J. Winkler), 1105–1110; 1992, Oberursel, DGM Informationsgesellschaft.
6. O. ENGLER, J. MIZERA, M. DELECROIX, J. DRIVER, and K. LOCKE: in Proc. Conf. Aluminium-lithium alloys 6', (ed. M. Peters and P.J. Winkler), 307–314; 1992, Oberursel, DGM Informationsgesellschaft.
7. 10.1016/0921-5093(91)90861-G10.1016/0921-5093(91)90861-G ↗
8. BOWEN A. W. · 1988 · 971
9. X. H. ZENG, M. AHMAD, and T. ERICSSON: in Proc. Conf. Aluminium-lithium alloys 6', (ed. M. Peters and P.J. Winkler), 1021–1026; 1992, Oberursel, DGM Informationsgesellschaft.
10. 10.1155/TSM.10.36110.1155/TSM.10.361 ↗
11. H. J. BUNGE: 'Texture analysis in materials science'; 1982, London, Butterworths.
12. LUCKE K. · Z. Metallkd. · 1986 · 77 · 312
13. J. HIRSCH, W. MAO, and K. LUCKE: in 'Aluminium technology '86', (ed. T. Sheppard, 303; 1986, London, The Institute of Metals.
14. HIRSCH J. · J. Phys. · 1987 · 605
15. 10.1179/mst.1990.6.11.111310.1179/mst.1990.6.11.1113 ↗
16. JUUL JENSEN D. · 1988 · 431
17. K. LOCKE and O. ENGLER: in Proc. Conf. 'Aluminium alloys' (ICAA3), Volume III, (ed. L. Arnberg et al.), 439–452; 1992, SINTEF Metallurgy, Trondheim, Norway.
18. P. M. B. RODRIGUES, H. BICHSEL, and P. FURRER: 'Texture in non-ferrous metals and alloys', (ed. H. D. Merchant and J. G. Morris), 44–59; 1984, Warrendale, PA, The Metallurgical Society of AIME.
19. 10.1179/msc.1974.8.1.7310.1179/msc.1974.8.1.73 ↗
20. ENGLER O. · 1992 · 333
21. 10.1007/BF0266120410.1007/BF02661204 ↗
22. WAGNER P. · 1992 · 497
23. 10.1016/0001-6160(86)90180-X10.1016/0001-6160(86)90180-X ↗
24. ENGLER O. · Textures Microstruct. · 1993
25. BUNGE H. J. · Peine Salzgitter Ber. Sonderheft · 1980 · 1
26. 10.1002/crat.1970005011210.1002/crat.19700050112 ↗
27. H. J. BUNGE: in 'Quantitative texture analysis', (ed. H. J. Bunge and C. Esling, 383; 1986, Oberursel, DGM Informations-gesellschaft.
28. TAYLOR G. I. · J. Inst. Met. · 1938 · 62 · 307
29. 10.1179/mst.1986.2.4.35410.1179/mst.1986.2.4.354 ↗
30. WAGNER F. · 1987 · 251
31. 10.1016/0749-6419(89)90020-X10.1016/0749-6419(89)90020-X ↗
32. 10.1016/0167-6636(90)90042-E10.1016/0167-6636(90)90042-E ↗
33. PRZYSTUPA M. A. · 1988 · 1051
34. T. LEFFERS and N. HANSEN: in Proc. Conf. 13th Riser Int. Symp. on 'Material science', (ed. S. I. Andersen et al.), 57–77; 1992, Roskilde, Riser National Laboratory.
35. 10.1016/0956-7151(92)90040-L10.1016/0956-7151(92)90040-L ↗
36. D. JUUL JENSEN and N. HANSEN: in Proc. 9th Int. Conf. on 'Strength of metals and alloys' (ICSMA 9), (ed. D. G. Brandon et al.), 179; 1991, London, Freund.