journal article·1991-04

Synthesis of nitrogen ceramic povvders by carbothermal reduction and nitridation Part 1 Silicon nitride

Y. W. Cho, J. A. Charles

Publisher page

Abstract

Silicon nitride powders of high α content were prepared from mixtures of very fine amorphous silica and carbon powders in flowing nitrogen at 1400–1500°C. The higher the reaction temperature within this range the lower the yield of silicon nitride in spite of a higher rate of SiO generation. The overall reaction rate increased with increasing nitrogen flowrate. An increase of carbon content of the starting mixtures increased the reaction rate by increasing the rate of SiO formation as well as the rate of Si3N4 nucleation. It is thought that the effect of the carbon particle size on the reaction rate is more significant than that of the specific surface area. The amount of silicon carbide formed and the α/β ratio in the reaction products were strongly affected by a change of the source of carbon used in the starting mixtures.MST/1346a
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · MXene and MAX Phase Materials · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. 10.1111/j.1151-2916.1973.tb12440.x10.1111/j.1151-2916.1973.tb12440.x ↗
2. MORGAN P. E. D. · Final report A-C3316, Franklin Institute Research Laboratory, Philadelphia, PA, 1973
3. PROCHAZKA S. · Am. Ceram. Soc. Bull., · 1978 · 57 · 579
4. fawn H. · German Patent 88999, 30 September 1896
5. 10.1007/BF0054141010.1007/BF00541410 ↗
6. A. HENDRY and K. H. JACK: ‘Special ceramics 6’ (Proc. Conf.), (ed. P. Popper, 199-208; 1975, Stoke-on-Trent, British Ceramic Research Association.
7. J. G. LEE and I. B. CUTLER: ‘Nitrogen ceramics’, (ed.F. L. Riley), 175-181; 1977, Leyden, Noordhoff International Publishing.10.1007/978-94-010-1298-0_12 ↗
8. A. SZWEDA, A. HENDRY, and K. H. JACK: ‘Special ceramics 7’ (Proc. Conf.), (ed. P. Popper, 107-118; 1981, Stoke-on-Trent, British Ceramic Research Association.
9. 10.1111/j.1151-2916.1982.tb09951.x10.1111/j.1151-2916.1982.tb09951.x ↗
10. 10.1111/j.1151-2916.1984.tb19684.x10.1111/j.1151-2916.1984.tb19684.x ↗
11. SIDDIQI S. A. · J. Mater. Sc · 1985, 20
12. v. FIGUSCH and T. LICKO: ‘High tech ceramics’, (ed. P. Vincenzini, 517-526; 1987, Amsterdam, Elsevier Science.
13. PERERA D. S. · J. Mater. Sc · 1987, 22
14. MITOMO M. · Adv. Ceram. Mater., 1987, 2, (3A), 253-256
15. JOHNSON R. C. · US Patent 3,244,480, 5 April, 1966
16. KNIPPENBERG W. F. · Silicon carbide-1968' (Proc. Conf.),
17. HANNA S. B. · Trans. J. Brit. Ceram. Soc., · 1985 · 84 · 18
18. 10.2472/jsms.37.6510.2472/jsms.37.65 ↗
19. S. WILD, P. GRIEVESON, and K. H. JACK: ‘Special ceramics 5’ (Proc. Conf.), (ed. P. Popper, 385-395; 1972, Stoke-on-Trent, British Ceramic Research Association.
20. PEHLKE R. D. · Trans. AIME · 1959 · 215 · 781
21. STULL D. R. · 'JANAF thermodynamic tables' · 1971
22. A. HENDRY: ‘Nitrogen ceramics’, (ed. F. L. Riley), 183-185; 1977, Leyden, Noordhoff International Publishing.10.1007/978-94-010-1298-0_13 ↗
23. Bworr J. F. · Thermochemistry for steelmaking', Vol. 1, 1960, London, Addison-Wesley
24. RAO Y. K. · Soc. · 1983 · 82 · 123
25. BEGLEY H. B. · J. Am. Ceram. Soc., · 1981 · 64 · C124—C126
26. SMITH P. L. · Trans. J. Brit. Ceram. Soc., · 1983 · 82 · 23
27. 10.2514/3.360310.2514/3.3603 ↗
28. J. G. LEE: PhD thesis, University of Utah, 1976.
29. 10.1111/j.1151-2916.1989.tb05964.x10.1111/j.1151-2916.1989.tb05964.x ↗
30. GAZZARA C. P. · Am. Ceram. Soc. Bull., · 1977 · 56 · 777
31. 10.1111/j.1151-2916.1988.tb07532.x10.1111/j.1151-2916.1988.tb07532.x ↗
32. MOULSON A. J. · J. Mater. Sc · 1979, 14
33. 10.1007/BF0102630910.1007/BF01026309 ↗
34. dc JONG R. · J. Am. Ceram. Soc., · 1987 · 70 · C338—C341