Strengthening in pearlite formed from thermomechanically processed austenite in vanadium steels and implications for toughness
Source abstract
Abstract
Strengthening in the pearlite of 0·75C–1·2Mn (wt-%) steels resulting from microalloying with 0·09–0·16% V was examined. The steels were transformed by controlled cooling in a dilatometer at an average transformation temperature of 600°C, which produced a pearlite interlamellar spacing of 0·11–0·12 μm. Using electron microscopy no hardening precipitates in the as transformed specimens were revealed, but after additional aging V(CN) precipitates were observed. In the investigation of the hardening caused by V(CN) precipitation, a limiting value was found, which could not be increased by a further addition of V. The limit of the precipitation hardening is suggested to be a consequence of the limited amount of C and N dissolved in the ferrite, since no interphase precipitation occurred. The maximum hardness obtained was 400 HV20 and an increment of 75 HV20 (or 260 MN m−2 in strength) was found in comparison with the comparable pearlite structure of a steel containing no V. From examination of the effect of the thermomechanically processed austenite structure on the pearlite morphology, it was found that transformation from fine grained unrecrystrallised austenite produced an ultrafine colony pearlite from which it can be stated that this transformation would result in improved toughness in pearlitic steels.MST/847
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. GLADMAN T. · J. Iron Steel Inst., · 1972 · 210 · 916
2. THEWLIS G. · Met. Mater., · 1981 · 21 · 8
3. ENGINEER S. · Thyssen Edelstahl Tech. Ber., · 1980 · 6 · 85
4. ENGINEER S. · Thyssen Edelstahl Tech. Ber., · 1981 · 7 · 3
5. 10.1007/BF0264670910.1007/BF02646709 ↗
6. 10.1179/mst.1987.3.11.89410.1179/mst.1987.3.11.894 ↗
7. N. RIDLEY, M. T. LEWIS, and W. B., MORRISON: in ‘Advances in the physical metallurgy and applications of steels’, 199-205; 1982, London, The Metals Society.
8. 10.1179/cmq.1982.21.1.310.1179/cmq.1982.21.1.3 ↗
9. 10.1179/cmq.1983.22.4.47510.1179/cmq.1983.22.4.475 ↗
10. 10.1179/cmq.1983.22.2.19310.1179/cmq.1983.22.2.193 ↗
11. PARSONS D. E. · I-ISLA steels — Technology and applications',
12. MOTTISHAW T. D. · LISLA steels — Technology and applications',
13. 10.1179/mst.1985.1.4.27610.1179/mst.1985.1.4.276 ↗
14. GUERRIERI A. · Metall. Ital., · 1982 · 74 · 751
15. YADA H. · Nippon Steel Tech. Rep., June 1983, (21), 203-215
16. BERCY P. · Metall. Plant Technol., · 1984 · 4 · 46
17. PICKERING F. B. · 'Hardenability concepts with applications to steel',
18. 10.1007/BF0264283210.1007/BF02642832 ↗
19. ITYZAK J. M. · Metall. Trans., · 1976 · 7 · 121710.1007/BF02656606 ↗
20. DOLLAR M. · 1986 · Pittsburgh
21. 10.1179/mst.1988.4.4.32810.1179/mst.1988.4.4.328 ↗
22. 10.1007/BF0264395310.1007/BF02643953 ↗
23. 10.1179/mst.1986.2.8.81610.1179/mst.1986.2.8.816 ↗
24. 10.1016/0036-9748(87)90207-910.1016/0036-9748(87)90207-9 ↗
25. 10.1007/BF0281169810.1007/BF02811698 ↗
26. 10.1007/BF0264784310.1007/BF02647843 ↗
27. BERNSHTEIN M. L. · Izv. Akad. Nauk SSSR, Met.,
28. 10.2355/isijinternational1966.23.77510.2355/isijinternational1966.23.775 ↗
29. 10.1007/BF0264858110.1007/BF02648581 ↗
30. WADA T. · Trans. Iron Steel. Inst. Jpn · 1984 · 24 · B277
31. SAMEDOV O. V. · VUZ Chernaya Metall., · 1987 · 96
32. ROBERTS W. · 'FISLA steels — Technology and applications',
33. ZHENG Y. · IISLA steels —Technology and applications',
34. J. W. CAHN and W. C. MAGEE in ‘Decomposition of austenite by diffusional processes’, (ed. V. F. Zackay and H. I. Aaronson), 131-192; 1962, New York, Interscience.
35. 10.1007/BF0281170410.1007/BF02811704 ↗
36. RIDLEY N. · Can. Metall. Q., · 1983 · 22 · 807
37. VELANDER K. · Swedish Institute for Metals Research · 1986 · Stockholm
38. 10.1016/0026-0800(84)90002-810.1016/0026-0800(84)90002-8 ↗
39. E. C. BAIN and H. W. PAXTON: ‘Alloying elements in steel’, 107-112; 1966, Metals Park, OH, ASM.
40. H. NILSSON: ‘Vanadium-microalloyed eutectoid steels', Swedish Institute for Metals Research, Stockholm, 1986.
41. M. ATKINS: ‘Atlas of continuous cooling transformation diagrams for engineering steels’; 1977, Sheffield, British Steel Corporation.