Micromechanisms governing fatigue behaviour of lithium containing aluminium alloys
Source abstract
Abstract
The emergence of lithium containing aluminium alloys as potential light metals for aircraft structures has engendered an unprecedented widespread interest aimed at improving their mechanical properties and studying their cyclic fatigue characteristics. The phenomenon of fatigue is environment sensitive and the alternating moisture conditions experienced by this candidate airframe material can be a handicap when designing for enhanced fatigue resistance. In this paper, the fatigue properties, deformation characteristics, and cyclic stress response of the commercial Al–Li–Cu–Mn and the experimental Al–Li–Mn and Al–Li–Cu–Mg–Zr alloys cycled to failure are compared over a range of plastic strain amplitudes in various environments, spanning the inert to the very aggressive. Abnormal plastic strain–fatigue life behaviour was observed for all the alloy systems and is attributed to differences in the distribution of deformation as a function of plastic strain amplitude and to change in the relative amounts of intergranular and transgranular fracture as a function of strain amplitude. Cyclic deformation was also observed to produce softening in the three alloys for most of their fatigue life. The softening is due to progressive loss of ordering contributions to hardening and is a mechanical and not an environmental effect.MST/888
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Fatigue and fracture mechanics · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. C. BAKER et al. (eds): 'Aluminium—lithium alloys III' (Proc. 3rd Int. Conf.); 1986, London, The Institute of Metals.
2. LEBARON I. M. · US Patent no. 2,381,219, Granted 1945
3. STARKE E. A. · J. Met., · 1980 · 33 · 24
4. 10.1016/0036-9748(71)90142-610.1016/0036-9748(71)90142-6 ↗
5. 10.1007/BF0116054810.1007/BF01160548 ↗
6. 10.1007/BF0264471510.1007/BF02644715 ↗
7. 10.1016/0025-5416(84)90055-710.1016/0025-5416(84)90055-7 ↗
8. 10.1016/0025-5416(84)90078-810.1016/0025-5416(84)90078-8 ↗
9. 10.1007/BF0281435010.1007/BF02814350 ↗
10. 10.1016/0142-1123(86)90022-810.1016/0142-1123(86)90022-8 ↗
11. MEYN D. A. · Trans. ASM · 1968 · 61 · 52
12. WEI R. P. · Int. J. Fract. Mech., · 1968 · 4 · 15910.1007/BF00188943 ↗
13. 10.1007/BF0005352210.1007/BF00053522 ↗
14. 10.1520/STP35890S10.1520/STP35890S ↗
15. 10.1016/0025-5416(86)90176-X10.1016/0025-5416(86)90176-X ↗
16. 10.1016/0025-5416(84)90104-610.1016/0025-5416(84)90104-6 ↗
17. 10.1007/BF0111470810.1007/BF01114708 ↗
18. BRESHNAHAN K. M. · MSc thesis, Georgia Institute of Tech-nology, Atlanta, GA, 1984
19. B. I. SANDOR: ‘Fundamentals of cyclic stress and strain’; 1972, Madison, WI, University of Wisconsin Press.
20. 10.1080/1478643680822752410.1080/14786436808227524 ↗
21. 10.1016/0025-5416(77)90089-110.1016/0025-5416(77)90089-1 ↗
22. SANDERS T. H. · JR: Metall. Trans., · 1976 · 7 · 1107
23. 10.1016/0025-5416(79)90167-810.1016/0025-5416(79)90167-8 ↗
24. COFFIN L. F. · J. Mater., · 1971 · 6 · 388
25. 10.1007/BF0264335010.1007/BF02643350 ↗
26. 10.1179/09506607479013697110.1179/095066074790136971 ↗
27. FIELD D. J. · Ref. 1, p. 325.
28. G. E. DIETER: ‘Mechanical metallurgy’, 2 edn; 1976, New York, McGraw-Hill.
29. LYNCH S. P. · Aluminium · 1973 · 49 · 141
30. 10.1007/BF0266739510.1007/BF02667395 ↗
31. SRIVATSAN T. S. · PhD thesis, Georgia Institute of Technology, Atlanta, GA, 1984
32. 10.1179/mst.1987.3.2.13010.1179/mst.1987.3.2.130 ↗