Superplasticity and superplastic forming processes
Source abstract
Abstract
Superplasticity, first observed some seventy years ago, remained a scientific curiosity until about twenty years ago. It is now recognized as a property which can be utilized in forming processes. There are two types of superplastic behaviour, known as fine–grained (or fine–structure) and internal–stress superplasticity. Fine–grained superplastic materials have a strain–rate sensitivity exponent of 0·5, and deform principally by a grain–boundary sliding mechanism. In this paper the microstructural features important in the development of fine structure super plasticity are discussed, and phenomenological equations for describing superplastic flow are presented. The superplastic properties of fine–grained materials can be optimized by promoting grain–boundary sliding and inhibiting slip. A number of fine–grained superplastic materials have been developed for commercial use, and their number is increasing. Internal–stress superplastic materials can have a strain–rate sensitivity exponent as high as unity, i.e. they can exhibit Newtonian viscous behaviour. Internal stresses can be generated by thermal cycling in materials that consist of two phases, or are anisotropic in their thermal–expansion coefficients, or are polymorphic. No commercial applications have yet been found for the superplastic forming of materials by generating internal stress.MST/169
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. 10.1016/0022-3115(63)90010-210.1016/0022-3115(63)90010-2 ↗
2. 10.1016/0036-9748(82)90389-110.1016/0036-9748(82)90389-1 ↗
3. PEARSON C. E. · J. Inst. Met., · 1934 · 54 · 111
4. ROSENHAIN W. · J. Inst. Met., · 1912 · 8 · 149
5. BENGOUGH G. D. · J. Inst. Met., · 1912 · 7 · 123
6. ROSENHAIN W. · J. Inst. Met., · 1920 · 23 · 261
7. JENKINS C. H. M. · J. Inst. Met., · 1928 · 40 · 21
8. SAUVEUR A. · Iron Age · 1924 · 113 · 581
9. BOCHVAR A. A. · Otd. Tekhn. Nauk · 1945 · 9 · 821
10. UNDERWOOD E. E. · J. Met., · 1962 · 14 · 914
11. S. TANG: ‘Mechanics of superplasticity’; 1979, New York, Kriegar.
12. 10.1016/0079-6425(76)90005-010.1016/0079-6425(76)90005-0 ↗
13. O. H. SMIRNOV: ‘Working of metals under pressure in the superplastic state’; 1979, Moscow, Mashinostroeniya (in Russian).
14. O. A. KAIBYSHEV: ‘Plasticity and superplasticity in metals’; 1975, Moscow, Metallurgiya (in Russian).
15. SHERBY O. D. · Sci. J., · 1969 · 5 · 75
16. 10.1179/mtlr.1970.15.1.11510.1179/mtlr.1970.15.1.115 ↗
17. 10.1007/BF0240328310.1007/BF02403283 ↗
18. T. H. ALDEN: in ‘Fundamental aspects of structural alloy design’, (ed. R. T. Jaffee and B. A. A), 411; 1977, New York, Plenum.10.1007/978-1-4684-2421-8_14 ↗
19. J. GITTUS: ‘Creep viscoelasticity and creep fracture in solids’, 509; 1975, London, Applied Science.
20. 10.1146/annurev.ms.09.080179.00105510.1146/annurev.ms.09.080179.001055 ↗
21. 10.1146/annurev.ms.09.080179.00120310.1146/annurev.ms.09.080179.001203 ↗
22. 10.1179/03071697680339219610.1179/030716976803392196 ↗
23. mum O. · J. Jpn Soc. Technol. Plast., · 1975 · 16 · 1015
24. 10.1051/rphysap:019780013020530010.1051/rphysap:0197800130205300 ↗
25. HAMILTON C. H. · Met. Prog., · 1976 · 109 · 34
26. 10.1016/0378-3804(78)90014-110.1016/0378-3804(78)90014-1 ↗
27. 10.1007/BF0240275110.1007/BF02402751 ↗
28. WALSER B. · Metall. Trans., · 1979 · 10 · 156110.1007/BF02812011 ↗
29. 10.1179/03071698180327596510.1179/030716981803275965 ↗
30. GRIMES R. · Aluminium · 1975 · 51 · 720
31. 10.1179/03071697680339176410.1179/030716976803391764 ↗
32. 10.1016/0025-5416(80)90211-610.1016/0025-5416(80)90211-6 ↗
33. WERT J. A. · Metall. Trans., · 1981 · 12 · 1265
34. 10.1016/0036-9748(83)90171-010.1016/0036-9748(83)90171-0 ↗
35. 10.1016/0036-9748(84)90459-910.1016/0036-9748(84)90459-9 ↗
36. HOLT L. · Trans. AIME · 1968 · 242 · 25
37. ALDEN T. H. · Trans. AIME · 1968 · 242 · 825
38. 10.1179/msc.1969.3.1.110.1179/msc.1969.3.1.1 ↗
39. PACKER C. H. · Stanford University, Stanford, Cal. · 1967
40. NAZIRI H. · J. Inst. Met., · 1973 · 101 · 197
41. KOSSOWSKY R. · Trans. AIME · 1968 · 242 · 716
42. ARIELI A. · Metall. Trans., · 1980 · 11 · 18110.1007/BF02700455 ↗
43. coatE R. L. · J. Appl. Phys., · 1963 · 34 · 1969
44. 10.1007/BF0265660710.1007/BF02656607 ↗
45. 10.1007/BF0055289910.1007/BF00552899 ↗
46. 10.1080/1478643680822776110.1080/14786436808227761 ↗
47. 10.1179/msc.1977.11.5.15610.1179/msc.1977.11.5.156 ↗
48. 10.1016/0036-9748(79)90325-910.1016/0036-9748(79)90325-9 ↗
49. 10.1016/0022-5096(83)90049-210.1016/0022-5096(83)90049-2 ↗
50. DAEHN G. · Dept of Materials Science and Engineering, Stanford University, Stanford, Cal. · 1985
51. 10.1016/0022-3115(66)90095-X10.1016/0022-3115(66)90095-X ↗
52. 10.1179/03063457279044587610.1179/030634572790445876 ↗
53. 10.1016/0022-3115(73)90044-510.1016/0022-3115(73)90044-5 ↗
54. O. D. SHERBY, D. L. BLY, and D. H. WOOD: in ‘Physical metallurgy of uranium alloys’, (ed. J. J. Burke et al.), 311; 1976, Chestnut Hill, Mass., Brook Hill Publishing Company.
55. 10.1016/0022-3115(62)90224-610.1016/0022-3115(62)90224-6 ↗
56. 10.1016/0022-3115(72)90167-510.1016/0022-3115(72)90167-5 ↗
57. 10.1016/0036-9748(84)90392-210.1016/0036-9748(84)90392-2 ↗
58. OELSCHLAGEL D. · Trans. ASM · 1966 · 59 · 143
59. 10.1038/195138a010.1038/195138a0 ↗