journal article·2026-05-08

Optimized surface morphological characterization employing LASER-drilled hole to enhance the EDM efficiency of MoSi 2 -SiC intermetallic composites

M Ramamoorthi, T Elango, L Selvarajan, R Jeevananth

Publisher page

Abstract

Die-sinking electrical discharge machining with a constant spark gap uses a LASER-machined electrode with 38 holes of 0.16 mm diameter to machine a Molybdenum disilicide and Silicon Carbide (MoSi 2 -SiC) ceramic composite for high-temperature and high-performance applications like aerospace components, gas turbine parts, heating elements, and nuclear systems. Qualitative results are shown through EDM using multi-hole copper electrodes and pure EDM fluid to create holes in MoSi 2 -SiC.Significant performance outcomes, including trends in MRR, EWR and surface roughness (Ra), have been explicitly quantified. A design of experiments and analysis of variance (ANOVA) were employed to examine the link between experimental variables and outcomes.Pulse current is the most significant metric for Ra, with pulse on-time ranking closely behind.This study implemented Taguchi-Data Envelopment Analysis-based Ranking (DEAR) for identifying the optimal multi-response optimization parameter.Experimental research reveals optimal EDM settings for MoSi 2 -SiC ceramic composite, including laser-drilled multi-hole copper electrode, 3 A peak current, 7 μs pulse-on time, 4 μs pulse-off time, and 14 Kg/cm 2 dielectric pressure. Microstructural analysis will be done for each experiment session to find any unusual features in the machined composites. Machining time, flushing efficiency, and productivity are enhanced by laser-drilled multi-hole electrodes. The Taguchi-DEAR optimization method is used to balance performance outcomes, making it effective for practical EDM process improvements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mahendra Institute of Technology (Autonomous)

References (47)

Show source-provided references
1. 10.1007/s00170-025-15430-010.1007/s00170-025-15430-0 ↗
2. Majumder H, Yadao A, Maity K. Effect of input parameters on the key machinability aspects of nitinol during wedm. SRL 2022; 29: 2250026.
3. 10.3390/mi1307102610.3390/mi13071026 ↗
4. 10.1007/s40430-023-04642-810.1007/s40430-023-04642-8 ↗
5. 10.1007/s43452-025-01137-210.1007/s43452-025-01137-2 ↗
6. 10.1080/10426914.2023.221930710.1080/10426914.2023.2219307 ↗
7. 10.3233/JIFS-22365010.3233/JIFS-223650 ↗
8. 10.1007/s12666-022-02540-610.1007/s12666-022-02540-6 ↗
9. 10.1111/jace.1953510.1111/jace.19535 ↗
10. 10.3390/ma1520739210.3390/ma15207392 ↗
11. 10.1016/j.jmrt.2022.05.07610.1016/j.jmrt.2022.05.076 ↗
12. 10.1016/j.jeurceramsoc.2025.11723410.1016/j.jeurceramsoc.2025.117234 ↗
13. 10.1016/j.ceramint.2024.01.26110.1016/j.ceramint.2024.01.261 ↗
14. 10.1016/j.jmrt.2024.03.06310.1016/j.jmrt.2024.03.063 ↗
15. 10.1142/S0218625X2550072610.1142/S0218625X25500726 ↗
16. 10.1007/s00170-023-11423-z10.1007/s00170-023-11423-z ↗
17. Arumugam S, Gopalakrishnan B, Ganesan S, et al. Improvement of EDM machining performance by brass coated copper electrode. Int J Mach Mach Mater 2025; 27: 211–223.
18. 10.3390/surfaces703004010.3390/surfaces7030040 ↗
19. 10.1016/j.ijheatmasstransfer.2022.12256310.1016/j.ijheatmasstransfer.2022.122563 ↗
20. 10.3390/met1502014410.3390/met15020144 ↗
21. 10.1016/j.jmrt.2022.08.01510.1016/j.jmrt.2022.08.015 ↗
22. 10.1007/s40964-024-00907-310.1007/s40964-024-00907-3 ↗
23. Thangaraj M, Moiduddin K, Annamalai R, et al. Optimizing the Surface Parameters of Titanium (Ti-6Al-4 V) Alloy Specimens using WEDM Process based on Taguchi-DEAR Algorithm. Adv Sci Technol 2024; 18: 422–431.
24. Vennela VK, Subbaiah KV, Kothapalli AV, et al. Parametric optimization while turning Ti-6Al-4 V alloy in Mist-MQCL (Green environment) using the DEAR method. Manuf Rev 2020; 7: 38.
25. 10.3390/ma1421625010.3390/ma14216250 ↗
26. 10.1177/0954408923116372410.1177/09544089231163724 ↗
27. Luangpaiboon P, Piachat R, Imsap N. Implementing the taguchi-statistical learning-DEAR methodology in a MultiCriteria decision making approach to balance trade-offs in evolutionary algorithm performance. Sci Technol Asia 2024; 29: 156–172.
28. 10.1080/2374068X.2024.231483810.1080/2374068X.2024.2314838 ↗
29. Zuluaga R, Camelo-Guarín A, Hoz EDL. Assessing the relative impact of Colombian higher education institutions using fuzzy data envelopment analysis (fuzzy-dea) in state evaluations. J Eff Responsib Educ Sci 2023; 16: 299–312.
30. Rajmohan K, Vivekanandhan M, Senthilkumar C. Modelling and parametric optimization of EDM of Al 8081/SiCp composite through DEAR approach. IJIDeM 2024; 18: 697–708.
31. 10.3390/coatings1211161210.3390/coatings12111612 ↗
32. 10.1177/0954408923116483610.1177/09544089231164836 ↗
33. 10.1007/s00170-021-07032-310.1007/s00170-021-07032-3 ↗
34. 10.1080/01694243.2023.222525010.1080/01694243.2023.2225250 ↗
35. 10.1016/j.ceramint.2024.03.13510.1016/j.ceramint.2024.03.135 ↗
36. Selvarajan L, Venkataramanan K, Senthilkumar N, et al. Investigations and optimization of EDM parameters of conductive ceramic composites: a review. Adv. Manuf. Process Proceedings of AIMTDR 2022; 2021: 185–198.
37. 10.1016/j.jmrt.2022.08.01510.1016/j.jmrt.2022.08.015 ↗
38. 10.1016/j.ultras.2024.10752610.1016/j.ultras.2024.107526 ↗
39. 10.2298/CICEQ220731027P10.2298/CICEQ220731027P ↗
40. Ceritbinmez F, Gökkaya ES, Kanca E. MRR, EWR and KERF analysis in cold work tool steel machining in EDM method by copper and brass electrode. OsmaniyeKorkut Ata Üniversitesi Fen BilimleriEnstitüsüDergisi 2023; 6: 35–51.10.47495/okufbed.1063324 ↗
41. 10.1016/j.jmrt.2023.04.06710.1016/j.jmrt.2023.04.067 ↗
42. 10.1016/j.triboint.2024.11005010.1016/j.triboint.2024.110050 ↗
43. Selvarajan L, Jeevananth R, Venkataramanan K. A category based multifaceted jaya optimization methodology: optimizing surface quality in EDM drilling of MoSi2-SiC composite with morphological studies. J Mater Eng Perform 2026: 1–15.
44. 10.1007/s11665-021-06518-110.1007/s11665-021-06518-1 ↗
45. Nieslony P, Wojciechowski S, Gupta MK, et al. Relationship between energy consumption and surface integrity aspects in electrical discharge machining of hot work die steel. Sustain. Mater. Technol. 2023; 36: e00623.
46. 10.3390/su1605191710.3390/su16051917 ↗
47. 10.1007/s00170-018-2697-z10.1007/s00170-018-2697-z ↗