journal article·2025-05-14

Effect of incorporation of sub-micronic zirconia particles on the mechanical and thermal behaviour of alkali-treated jute fibre-reinforced epoxy composites

Bhabatosh Biswas, Biplab Hazra, Arijit Sinha, Abhijit Majumdar

Publisher page

Abstract

Natural fibre-reinforced composites are gaining immense popularity in various applications. This study demonstrates the utilization of alkali (NaOH)-treated jute fibres along with chemically treated zirconia (ZrO 2 ) particles as fillers within the epoxy matrix to fabricate bio-composites. Structural and morphological features of composites were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier-transformed infrared (FTIR) spectroscopy. Tensile, flexural and impact properties of composites were evaluated to understand their mechanical behaviour, while the thermal behaviour was determined by thermo-gravimetric analyzer (TGA). A comparative study of the mechanical and thermal properties showed that the NaOH-treated jute fibre/ZrO 2 composite gives the optimum results; and tensile strength, tensile modulus, flexural modulus, Izod impact strength and degradation temperature improved by 24.5%, 90.8%, 22.5%, 85.5% and 29 °C, respectively.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Polymer Nanocomposites and Properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre of Excellence for Composites, Ahmedabad Textile Industry's Research Association, Ahmedabad, Gujarat, India

Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai, Maharashtra, India

Department of Metallurgical Engineering, Kazi Nazrul University, Asansol, West Bengal, India

Department of Textile and Fibre Engineering, Indian Institute of Technology Delhi, New Delhi, Delhi, India

References (57)

Show source-provided references
1. Masuelli MA. Introduction of fibre-reinforced polymers− polymers and composites: concepts, properties and processes. In: Fiber reinforced polymers-the technology applied for concrete repair. IntechOpen, CBS Publishers & Distributors Pvt. Ltd, UK, 2013; 1–242. doi: https://doi.org/10.5772/54629
2. 10.1016/S0921-5093(03)00536-710.1016/S0921-5093(03)00536-7 ↗
3. 10.1016/j.compositesa.2009.03.00210.1016/j.compositesa.2009.03.002 ↗
4. Mohanty AK, Misra M, Hinrichsen G. Biofibres, biodegradable polymers and biocomposites: an overview. Macromol Mater Eng 2000; 276: 277–301.
5. 10.1016/j.indcrop.2010.08.00710.1016/j.indcrop.2010.08.007 ↗
6. 10.1016/j.compositesb.2011.12.01010.1016/j.compositesb.2011.12.010 ↗
7. Mohammed MA. Mechanical behavior for polymer matrix composite reinforced by copper powder. Al-Nahrain J Eng Sci 2011; 14: 160–176. Retrieved from https://nahje.com/index.php/main/article/view/615
8. Phiri R, Rangappa SM, Siengchin S, et al. Development of sustainable biopolymer-based composites for lightweight applications from agricultural waste biomass: A review. Adv Ind Eng Polym Res 2023; 6(4): 436–450. https://doi.org/10.1016/j.aiepr.2023.04.004
9. 10.3390/polym1417369810.3390/polym14173698 ↗
10. 10.1016/j.rinma.2022.10035510.1016/j.rinma.2022.100355 ↗
11. 10.1016/j.jestch.2016.10.01610.1016/j.jestch.2016.10.016 ↗
12. Biswas B, Bandyopadhyay NR, Mandal G, et al. Effect of alkaline treatment on mechanical properties of composites: unsaturated polyester reinforced ZrO2/jute and sisal. Polym Polym Compos 2021; 29: S1000–S1008.
13. 10.37358/MP.21.2.548210.37358/MP.21.2.5482 ↗
14. 10.1177/073168441561845910.1177/0731684415618459 ↗
15. 10.1088/2631-8695/ad264010.1088/2631-8695/ad2640 ↗
16. 10.4172/2169-0316.100023410.4172/2169-0316.1000234 ↗
17. Gupta MK Srivastava RK. Mechanical thermal and dynamic mechanical analysis of jute fibre reinforced epoxy composite. Indian Journal of Fibre & Textile Research (IJFTR) 2017; 42: 64–71. Retrieved from http://nopr.niscair.res.in/handle/123456789/40675.
18. Gupta MK. Effect of variation in frequencies on dynamic mechanical properties of jute fibre reinforced epoxy composites. J Mater Environ Sci 2018; 9: 100–106.
19. 10.1016/j.matpr.2015.07.03110.1016/j.matpr.2015.07.031 ↗
20. 10.1021/cm00048a00610.1021/cm00048a006 ↗
21. 10.1080/09276440.2023.222021710.1080/09276440.2023.2220217 ↗
22. Bhaskar J, Singh VK. Physical and mechanical properties of coconut shell particle reinforced-epoxy composite. J Mater Environ Sci 2013; 4: 227–232. Retrieved from http://www.jmaterenvironsci.com/.
23. 10.3390/polym1403050210.3390/polym14030502 ↗
24. 10.1016/0950-0618(95)92859-F10.1016/0950-0618(95)92859-F ↗
25. 10.3390/polym1312201710.3390/polym13122017 ↗
26. 10.1177/073168441141076110.1177/0731684411410761 ↗
27. 10.1007/s11665-020-05350-310.1007/s11665-020-05350-3 ↗
28. 10.3390/ma1613481310.3390/ma16134813 ↗
29. 10.1016/j.compositesa.2019.10550510.1016/j.compositesa.2019.105505 ↗
30. 10.13074/jent.06.24257810.13074/jent.06.242578 ↗
31. 10.1177/152808371879291510.1177/1528083718792915 ↗
32. 10.1016/j.compscitech.2006.07.00310.1016/j.compscitech.2006.07.003 ↗
33. 10.1016/j.dib.2017.06.02010.1016/j.dib.2017.06.020 ↗
34. 10.1016/j.compositesa.2023.10777510.1016/j.compositesa.2023.107775 ↗
35. 10.1016/j.jmrt.2019.09.07610.1016/j.jmrt.2019.09.076 ↗
36. Boraei SBA, Bakhshandeh B, Mohammadzadeh F, et al. Clay-reinforced PVC composites and nanocomposites. Heliyon 2024; 10(7): 1–21. https://doi.org/10.1016/j.heliyon.2024.e29196
37. 10.1016/j.matpr.2022.12.05910.1016/j.matpr.2022.12.059 ↗
38. 10.1016/j.compositesa.2018.09.03110.1016/j.compositesa.2018.09.031 ↗
39. 10.1016/j.matpr.2020.06.20510.1016/j.matpr.2020.06.205 ↗
40. 10.1088/1757-899X/225/1/01229910.1088/1757-899X/225/1/012299 ↗
41. 10.1016/S0143-7496(98)00021-910.1016/S0143-7496(98)00021-9 ↗
42. 10.1007/s10570-019-02383-310.1007/s10570-019-02383-3 ↗
43. 10.1002/pc.2508710.1002/pc.25087 ↗
44. 10.1590/S1516-1439200600010001610.1590/S1516-14392006000100016 ↗
45. 10.1016/j.matpr.2020.10.44210.1016/j.matpr.2020.10.442 ↗
46. 10.1007/s00339-010-5736-710.1007/s00339-010-5736-7 ↗
47. 10.1088/1755-1315/677/5/05204510.1088/1755-1315/677/5/052045 ↗
48. 10.1016/j.matpr.2019.07.75510.1016/j.matpr.2019.07.755 ↗
49. 10.1016/j.compositesb.2014.09.04010.1016/j.compositesb.2014.09.040 ↗
50. 10.1039/c2ra20739g10.1039/c2ra20739g ↗
51. 10.1163/092764411X57911310.1163/092764411X579113 ↗
52. Kim E-Y An S-K Kim H-D. Graft copolymerization of e-caprolactam onto Kevlar-49 fiber surface and properties of grafted Kevlar fiber reinforced composite. 1997. doi:https://doi.org/10.1002/(SICI)1097-4628(19970705)65:1%3C99::AID-APP13%3E3.0.CO;2-U10.1002/(SICI)1097-4628(19970705)65:1<99::AID-APP13>3.0.CO;2-U ↗
53. 10.1016/j.polymer.2011.01.04610.1016/j.polymer.2011.01.046 ↗
54. 10.1080/0021846940802665210.1080/00218469408026652 ↗
55. 10.1039/C4RA01525H10.1039/C4RA01525H ↗
56. 10.1016/j.polymer.2005.10.10310.1016/j.polymer.2005.10.103 ↗
57. 10.1016/j.progpolymsci.2010.11.00410.1016/j.progpolymsci.2010.11.004 ↗