journal article·2020-09

The influence of cryogenic rolling on a transformation-induced plasticity steel

Zhiping Hu, Rendong Liu, Li Lin, Guodong Wang

Materials Science and Technology· Volume 36· Issue 13
Publisher page

Abstract

Here, a novel cryogenic rolling plus intercritical annealing process was applied to a transformation-induced plasticity (TRIP) steel with a low chemical composition of carbon and manganese. Compared with traditional cold rolling, obvious grain refinement was observed, due to a high amount of dislocations retained. In addition, austenite volume fraction was increased, because of a unique nucleation mechanism. Subjected to cryogenic rolling, strength and ductility were increased, due to the enhanced austenite stability, which provided continuous and active TRIP effect. Consequently, tensile strength was increased to 1030 MPa, and elongation was increased to 38.2%. Thus, a great mechanical combination was obtained in a steel with a relatively low chemical composition with carbon and manganese, only by cryogenic rolling process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Automobile and Home Application Steel Institute, Technology Center of Angang Steel Company Limited, Anshan, People's Republic of China

The State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang, People's Republic of China

Funding

Northeastern University

References (31)

Show source-provided references
1. Cao WQ · Mater Sci Eng A · 2011 · 564 · 501
2. 10.1016/j.actamat.2016.08.01010.1016/j.actamat.2016.08.010 ↗
3. 10.1016/j.msea.2015.05.00510.1016/j.msea.2015.05.005 ↗
4. 10.1016/j.actamat.2015.05.03810.1016/j.actamat.2015.05.038 ↗
5. 10.1016/j.actamat.2016.04.04810.1016/j.actamat.2016.04.048 ↗
6. 10.1016/j.scriptamat.2011.12.02610.1016/j.scriptamat.2011.12.026 ↗
7. 10.1016/j.msea.2006.02.13310.1016/j.msea.2006.02.133 ↗
8. 10.1179/174328409X42891810.1179/174328409X428918 ↗
9. 10.1016/j.msea.2012.11.00610.1016/j.msea.2012.11.006 ↗
10. 10.1179/1743284714Y.000000072210.1179/1743284714Y.0000000722 ↗
11. 10.1016/j.actamat.2013.10.06710.1016/j.actamat.2013.10.067 ↗
12. 10.1080/02670836.2017.131220810.1080/02670836.2017.1312208 ↗
13. 10.1016/j.msea.2016.11.01710.1016/j.msea.2016.11.017 ↗
14. 10.2355/isijinternational.42.45010.2355/isijinternational.42.450 ↗
15. 10.1016/S0921-5093(99)00330-510.1016/S0921-5093(99)00330-5 ↗
16. 10.1016/j.actamat.2014.07.00510.1016/j.actamat.2014.07.005 ↗
17. 10.1007/s11661-009-0124-710.1007/s11661-009-0124-7 ↗
18. 10.1016/j.msea.2010.11.05410.1016/j.msea.2010.11.054 ↗
19. 10.1016/j.msea.2010.06.07210.1016/j.msea.2010.06.072 ↗
20. 10.1016/j.msea.2010.10.01210.1016/j.msea.2010.10.012 ↗
21. 10.1016/j.msea.2010.07.05610.1016/j.msea.2010.07.056 ↗
22. 10.1007/s11661-017-3979-z10.1007/s11661-017-3979-z ↗
23. 10.1016/j.actamat.2013.12.03810.1016/j.actamat.2013.12.038 ↗
24. 10.1007/s11661-016-3448-010.1007/s11661-016-3448-0 ↗
25. 10.1016/j.msea.2017.01.06310.1016/j.msea.2017.01.063 ↗
26. 10.1007/s11661-018-4497-310.1007/s11661-018-4497-3 ↗
27. 10.1016/j.msea.2014.12.04910.1016/j.msea.2014.12.049 ↗
28. 10.1016/j.scriptamat.2010.06.02310.1016/j.scriptamat.2010.06.023 ↗
29. 10.1016/j.msea.2013.12.00310.1016/j.msea.2013.12.003 ↗
30. 10.1016/j.actamat.2019.07.01410.1016/j.actamat.2019.07.014 ↗
31. 10.1016/j.actamat.2011.03.02510.1016/j.actamat.2011.03.025 ↗