journal article·2022-12

Laser welding of FeCoCrNiMnAl x ( x = 0, 0.75) high-entropy alloys fabricated by additive manufacturing

Mengdie Shan, Songyu Wang, Yangchuan Cai, Feifeng Gao, Sunusi Marwana Manladan, Lisong Zhu, Da Sun, Jian Han

Materials Science and Technology· Volume 38· Issue 18
Publisher page

Abstract

In the present study, the laser melting deposition (LMD) technology was adopted to fabricate FeCoCrNiMn and FeCoCrNiMnAl 0.75 high entropy alloys (HEAs). Then, laser welding method was used to join the HEAs in forms of similar (FeCoCrNiMnAl/FeCoCrNiMnAl and FeCoCrNiMnAl0.75/FeCoCrNiMnAl0.75) and dissimilar (FeCoCrNiMnAl0/FeCoCrNiMnAl0.75) combinations, respectively. Ultra-depth field microscope and electron backscatter diffraction detection were used to observe the macro-morphology and microstructure, respectively. It was found that the width of the weld bead and heat-affected zone with higher aluminium content was larger. In both base metals and welded joints, aluminium promoted the face-centered cubic (FCC) phase transfer into body-centered cubic (BCC), significantly refined the grain and the dislocation density of HEA is also increased, which increased strength and hardness, and decreased ductility. Highlights The FeCoCrNiMn/FeCoCrNiMn, FeCoCrNiMn/FeCoCrNiMnAl 0.75 , FeCoCrNiMnAl 0.75 /FeCoCrNiMnAl 0.75 joints were produced by laser welding. The widths of the weld bead and heat-affected zone increased with higher Al content. The weld bead with higher content of Al exhibited higher strength and hardness, but lower ductility.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, Tianjin University of Technology, Tianjin, People's Republic of China

Tianjin Chengxinda Metal-Testing Technology Co, Ltd., Tianjin, People's Republic of China

School of Materials Science and Engineering, Tianjin University, Tianjin, People's Republic of China

Department of Mechanical Engineering, Faculty of Engineering, Bayero University, Kano, Nigeria

School of Mechanical, Materials, Mechatronic and Biomedical Engineering, University of Wollongong, Wollongong, Australia

References (27)

Show source-provided references
1. 10.1002/adem.20030056710.1002/adem.200300567 ↗
2. 10.1080/21663831.2014.91269010.1080/21663831.2014.912690 ↗
3. 10.1016/j.actamat.2017.04.03310.1016/j.actamat.2017.04.033 ↗
4. 10.1016/j.intermet.2010.05.01410.1016/j.intermet.2010.05.014 ↗
5. 10.3390/e1609474910.3390/e16094749 ↗
6. 10.1016/j.jmst.2020.12.07910.1016/j.jmst.2020.12.079 ↗
7. 10.1016/j.addma.2019.10090210.1016/j.addma.2019.100902 ↗
8. 10.1016/j.apmt.2021.10116210.1016/j.apmt.2021.101162 ↗
9. 10.1016/j.ijplas.2021.10296510.1016/j.ijplas.2021.102965 ↗
10. 10.1016/j.jmst.2021.08.07510.1016/j.jmst.2021.08.075 ↗
11. 10.1126/science.125458110.1126/science.1254581 ↗
12. 10.1016/j.apsusc.2020.14879410.1016/j.apsusc.2020.148794 ↗
13. 10.1016/j.apsusc.2020.14573610.1016/j.apsusc.2020.145736 ↗
14. 10.1016/j.intermet.2018.02.01410.1016/j.intermet.2018.02.014 ↗
15. 10.1016/j.jmst.2021.02.00310.1016/j.jmst.2021.02.003 ↗
16. 10.1016/j.matdes.2020.10850510.1016/j.matdes.2020.108505 ↗
17. 10.1016/j.matlet.2019.12706010.1016/j.matlet.2019.127060 ↗
18. 10.1016/j.msea.2018.11.11010.1016/j.msea.2018.11.110 ↗
19. 10.1016/j.optlastec.2016.07.01210.1016/j.optlastec.2016.07.012 ↗
20. 10.1016/j.matdes.2017.01.05410.1016/j.matdes.2017.01.054 ↗
21. 10.1016/j.optlastec.2019.04.01210.1016/j.optlastec.2019.04.012 ↗
22. 10.1016/j.jmapro.2021.10.02210.1016/j.jmapro.2021.10.022 ↗
23. Ranganathan S. · Currentrnce · 2003 · 85 · 1404
24. 10.1016/j.jallcom.2018.04.31310.1016/j.jallcom.2018.04.313 ↗
25. 10.1016/j.jmrt.2021.03.02310.1016/j.jmrt.2021.03.023 ↗
26. 10.1016/j.surfcoat.2021.12707710.1016/j.surfcoat.2021.127077 ↗
27. Xiang HG · 2010