Simulating novel gas turbine conditions for materials assessment: Cascade design and operation
Source abstract
Abstract
Integrated gasification combined cycles can incorporate pre-combustion carbon capture. High-H 2 syngas produces high H 2 O levels after combustion, potentially accelerating gas turbine component damage. Determining materials systems’ suitability for this novel environment requires exposures in representative environments. Thus, an existing 0.7 MW burner rig was modified to generate the combustion environment and incorporate a cascade of 15 air-cooled turbine blades. Computational fluid dynamic calculations using blade dimensions and flow requirements supported the cascade design and determined blade placement within the gas flow. Trials of the modified unit have shown that a simulated combusted H 2 -rich syngas composition was generated at gas temperatures ≤1440°C. A 1000 h exposure has been carried out with thermal barrier coated blades to demonstrate the operation of the unit. This paper is part of a thematic issue on the 9th International Charles Parsons Turbine and Generator Conference. All papers have been revised and extended before publication in Materials Science and Technology. GRAPHICAL ABSTRACT
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Combustion and flame dynamics · Thermochemical Biomass Conversion Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Power Engineering Centre, Energy Theme, Cranfield University, Cranfield, Bedfordshire MK43 0AL, UK
Siemens AG, Mülheim an der Ruhr, Germany
Funding
Seventh Framework Programme
References (25)
Show source-provided references
1. European Commission: ‘Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions: A Roadmap for Moving to a Competitive Low Carbon Economy in 2050’, Report: COM/2011/0112 final, European Commission, 2011.
2. Dechamps P. · 2006 · 25
3. 10.1179/1743284712Y.000000013310.1179/1743284712Y.0000000133 ↗
4. Waschbüsch B. · 2001 · 261
5. GE Power Generation: https://powergen.gepower.com/products/heavy-duty-gas-turbines.html (accessed 26/2/2017).
6. Siemens Gas Turbines: http://www.energy.siemens.com/hq/en/fossil-power-generation/gas-turbines/ (accessed 26/2/2017).
7. Allen D. H. · 1998 · 1825
8. Scheirer S. T., and Viswanathan R. ‘Evolution of Hot Section Materials Technology’, Proc. ASM Materials Solution Conf., St Louis, MO, USA, October 2000, ASM International.
9. Schulenberg T. · 1998 · 1825
10. Simms N. J. · 2002 · 73
11. Sims C. T. · 1987
12. 10.1017/CBO978051154128510.1017/CBO9780511541285 ↗
13. Nicholls J. R. · 2002 · 57
14. 10.1016/j.surfcoat.2010.08.15110.1016/j.surfcoat.2010.08.151 ↗
15. 10.1002/maco.20060398510.1002/maco.200603985 ↗
16. Birks N., Meier G. H., and Pettit F. S. ‘Introduction to the high-temperature oxidation of metals’, 2nd edn; 2006, Cambridge, Cambridge University Press.10.1017/CBO9781139163903 ↗
17. Maurstad O. · 2005
18. 10.1016/j.ijhydene.2009.05.05410.1016/j.ijhydene.2009.05.054 ↗
19. H2-IGCC project homepage: http://www.h2-igcc.eu/ (accessed 11th January 2017).
20. 10.1179/0960340914Z.0000000009810.1179/0960340914Z.00000000098 ↗
21. 10.4028/www.scientific.net/MSF.369-372.83310.4028/www.scientific.net/MSF.369-372.833 ↗
22. 10.1080/02619180.1989.1175343310.1080/02619180.1989.11753433 ↗
23. Sumner J., Mack D. E., Cernuschi F., Stamm W., Moscatelli A., Nardone S., Sarens B., Simms N. J., and Oakey J. E. ‘Advanced Coatings for Novel Combustion Environments in Gas Turbines Fired on H2-Rich Syngas’, in preparation.
24. 10.1179/1743284712Y.000000009710.1179/1743284712Y.0000000097 ↗
25. Stamatis A. G. · 2013 · 187