Effect of Ti/N ratio on strain aging and plastic anisotropy in extra deep drawing quality steel
Source abstract
Abstract
Small addition of titanium (∼0·01 wt-%) to low carbon (∼0·04 wt-%) aluminium killed extra deep drawing quality steel resulted in a decrease in strain aging as well as a decrease in plastic anisotropy after cold rolling and annealing. The extent of decrease in both the strain aging and plastic anisotropy was found to be a function of Ti/N ratio. It was found that at a Ti/N ratio of 2·4, the aluminium killed low carbon steel was completely non-aging after cold rolling and annealing. However, there was also a concomitant decrease in the plastic anisotropy with the increase in Ti/N ratio. The average plastic anisotropy ratio ravg decreased from a value of 1·8 in steels with no titanium (Ti/N=0), to a value of 1·4 in steels with Ti/N=2·4.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research and Development Centre for Iron and SteelSteel Authority of India Ltd, HINOO, Ranchi, Jharkhand 834002, India
References (2)
Show source-provided references
1. 10.2355/isijinternational1966.19.14410.2355/isijinternational1966.19.144 ↗
2. 10.2355/isijinternational1966.19.39110.2355/isijinternational1966.19.391 ↗