journal article·2008-10

Tensile ductility of AA5182: Effect of impact loading

M. Zadra, G. Straffelini, A. Molinari

Materials Science and Technology· Volume 24· Issue 10
Publisher page

Abstract

The tensile ductility of an AA5182-O rolled sheet under impact loading (strain rate of ∼ 170 s−1) was found to be larger than under quasi-static loading (strain rate of 0·001 s−1). In particular, the local equivalent plastic strain at fracture was 0·862 in the first case and 0·811 in the second case, and the plastic elongation at fracture was 0·338 and 0·244 respectively. This result was attributed to the local strain triaxiality at the fracture region. In fact, the high strain rate during impact loading alleviates the local strain triaxiality, reducing the void growth rate and, in turn, the critical equivalent strain for ductile fracture. However, void nucleation rate was found to be higher in the case of impact loading, since the increased local strain hardening favours the attainment of the critical stress necessary to void nucleation, that occurs by particle decohesion and by particle brittle fracture.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Kaufman J. C. ‘Properties of aluminum alloys’; 1999, Materials Park, OH, ASM International.
2. Hosford W. F., and Caddell R. M. ‘Metal forming — mechanics and metallurgy’; 1993, Englewood Cliffs, NJ, Prentice Hall.
3. 10.1016/S0921-5093(99)00653-X10.1016/S0921-5093(99)00653-X ↗
4. 10.1016/S0921-5093(02)00036-910.1016/S0921-5093(02)00036-9 ↗
5. 10.1115/1.280683710.1115/1.2806837 ↗
6. 10.4028/www.scientific.net/MSF.426-432.28510.4028/www.scientific.net/MSF.426-432.285 ↗
7. 10.1016/S0921-5093(99)00570-510.1016/S0921-5093(99)00570-5 ↗
8. 10.1007/s11661-001-0123-910.1007/s11661-001-0123-9 ↗
9. 10.1016/0956-7151(92)90166-C10.1016/0956-7151(92)90166-C ↗
10. Lindholm U. S. · J. Mater · 1971 · 6 · 119
11. 10.1016/1359-6454(95)00228-610.1016/1359-6454(95)00228-6 ↗
12. 10.1007/BF0322123010.1007/BF03221230 ↗
13. 10.1016/0013-7944(84)90068-710.1016/0013-7944(84)90068-7 ↗
14. 10.1007/s11661-000-0262-410.1007/s11661-000-0262-4 ↗
15. 10.1016/j.actamat.2004.02.04110.1016/j.actamat.2004.02.041 ↗
16. 10.1016/j.actamat.2004.02.01510.1016/j.actamat.2004.02.015 ↗
17. Marciniak Z., Duncan J. L., and Hu S. J. ‘Mechanics of sheet metal forming’; 2002, Oxford, Butterworth Heinemann.
18. 10.1016/0924-0136(95)02068-310.1016/0924-0136(95)02068-3 ↗
19. Lassance D. · Mater. Sc · 2007 · 62
20. 10.1016/0022-5096(76)90024-710.1016/0022-5096(76)90024-7 ↗
21. Thomason P. F. ‘Ductile fracture of metals’; 1990, Oxford, Pergamon Press.
22. 10.1007/BF0281530510.1007/BF02815305 ↗
23. Knott J. F. ‘Fundamentals of fracture mechanics’; 1973, New York, John Wiley & Sons.
24. 10.1007/BF0267230610.1007/BF02672306 ↗
25. 10.1016/0956-7151(90)90127-310.1016/0956-7151(90)90127-3 ↗