Low-cost fabrication of high-performance composite structures using external compaction pressure
Source abstract
Abstract
In the composite industry, wet lay-up and vacuum bagging are widely used, low-cost manufacturing processes. This paper investigates the mechanical performance of wet layup and vacuum bagged carbon fibre-reinforced laminates compressed in a hydraulic press at different compaction pressures. The external compaction pressure is shown to significantly reduce void content, and increase the fibre volume fraction and mechanical performance of tested laminates. The tensile and flexural properties of tested specimens subjected to high levels of external compaction pressure are found to be comparable to those of out-of-autoclave (OOA) prepreg specimens. It is summised that the use of external compaction pressure over wet layup and vacuum bagged composites offers a low-cost (and low-energy) industrial processing route for manufacturing high-performance carbon fibre-reinforced components.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Engineering and Built Environment, Griffith University, Southport, Australia
Research Institute of Material Science and Technology (INTEMA-CONICET), National University of Mar del Plata, Mar del Plata, Argentina
Funding
Cooperative Research Centres
References (45)
Show source-provided references
1. 10.1016/j.compositesb.2018.10.10110.1016/j.compositesb.2018.10.101 ↗
2. Rana S · 2016
3. 10.1016/B978-0-08-100037-3.00004-310.1016/B978-0-08-100037-3.00004-3 ↗
4. 10.1016/j.marstruc.2018.02.00410.1016/j.marstruc.2018.02.004 ↗
5. 10.1016/j.matdes.2014.10.03210.1016/j.matdes.2014.10.032 ↗
6. 10.1016/j.compositesb.2005.09.00110.1016/j.compositesb.2005.09.001 ↗
7. 10.1016/j.compstruct.2005.11.04110.1016/j.compstruct.2005.11.041 ↗
8. 10.1177/002199831557637910.1177/0021998315576379 ↗
9. 10.1016/j.compositesb.2017.11.03810.1016/j.compositesb.2017.11.038 ↗
10. 10.3390/s1711267910.3390/s17112679 ↗
11. 10.1007/978-3-030-45489-010.1007/978-3-030-45489-0 ↗
12. 10.1016/B978-0-12-804459-9.00002-610.1016/B978-0-12-804459-9.00002-6 ↗
13. 10.1007/s42114-021-00303-310.1007/s42114-021-00303-3 ↗
14. Wu Z · ES Mater Manuf · 2019 · 6 · 38
15. 10.1016/j.compscitech.2019.02.02510.1016/j.compscitech.2019.02.025 ↗
16. Naik V · Eng Sci · 2021 · 18 · 1
17. 10.1016/j.compositesb.2019.05.03210.1016/j.compositesb.2019.05.032 ↗
18. 10.1177/073168440606519410.1177/0731684406065194 ↗
19. 10.1016/j.carbon.2018.10.02910.1016/j.carbon.2018.10.029 ↗
20. 10.1007/978-3-030-78807-010.1007/978-3-030-78807-0 ↗
21. 10.1016/0010-4361(89)90213-910.1016/0010-4361(89)90213-9 ↗
22. 10.3390/polym1009099210.3390/polym10090992 ↗
23. Flower HM. · 2012
24. 10.1016/j.compositesa.2014.09.02910.1016/j.compositesa.2014.09.029 ↗
25. Hu W, Nutt S, Gill M. In-situ monitoring of air removal during vacuum bag-only (vbo) processing. 21st Int. Conf. Compos. Mater; 2017. p. 1–9.
26. Park SJ · 2011
27. Shama Rao N, Simha T, Rao K, et al. Carbon composites are becoming competitive and cost effective. https://www.infosys.com/engineering-services/white-papers/documents/carbon-composites-cost-effective.pdf. White paper (2018).
28. 10.1016/j.compstruct.2015.01.02210.1016/j.compstruct.2015.01.022 ↗
29. Summerscales J. Taking the high energy demand out of autoclave processing of composites. [.]; 2018. SAMPE Europe 2018, Southampton, 2018 September 11–13, oral presentation. ISBN 978-90-821727-9-9, Accessed: 2021-02-16.
30. Prudham G, Summerscales J. Taking the high energy demand out of autoclave processing of composites. 13th International Conference on Flow Processes in Composite Materials (FPCM 13); 2016. Paper 37, oral presentation. Accessed: 2021-02-16; Available from: https://www.researchgate.net/profile/john_summerscales/project/cool-clave-a-cost-and-energy-efficient-autoclave/attachment/5b9f98a3cfe4a76455f3d775/as:671820743204864@1537185955158/download/c2018_sampe_coolclave.pdf.
31. 10.1177/002199831770199810.1177/0021998317701998 ↗
32. ATL-Composites. Atl composites: Zu200/3; 2021. Accessed: 2021-07-28. Available from: https://atlcomposites.com.au/product/159/Carbon-Reinforcements.
33. Allnex. FGI ES180 epoxy data system; 2021. Accessed: 2021-07-28. Available from: https://martglass.com.au/wp-content/uploads/FGI-Epoxy-Resin.pdf.
34. 10.1016/j.polymdegradstab.2007.11.01610.1016/j.polymdegradstab.2007.11.016 ↗
35. Solvay. VTM-264; 2021. Accessed: 2021-08-04. Available from: https://www.solvay.com/en/product/vtm-264.
36. SAI-Global. Abrasive products – checking the grit size of superabrasives. Standards Australia; 2006. Standard.
37. Nikon. Nikon SMZ 745T; 2021. Accessed: 2021-10-10. Available from: https://www.nikonmetrology.com/images/brochures/stereo-microscopes-en.pdf
38. ASTM-International. Standard test method for tensile properties of polymer matrix composite materials. West Conshohocken: ASTM International; 2017. Standard.
39. ASTM-International. Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. West Conshohocken: ASTM International; 2017. Standard.
40. Gurit. Guide to composites; 2019. Accessed: 2021-10-10. Available from: https://www.gurit.com/en/our-business/composite-materials.
41. Callister WD · 2021
42. 10.1080/1023666X.2015.98907610.1080/1023666X.2015.989076 ↗
43. 10.1016/S1359-835X(98)00179-110.1016/S1359-835X(98)00179-1 ↗
44. 10.1016/S1359-835X(96)00109-110.1016/S1359-835X(96)00109-1 ↗
45. 10.1016/j.compstruct.2016.10.03710.1016/j.compstruct.2016.10.037 ↗