Intergranular microstructure in magnesium based die cast AE alloys
Source abstract
Abstract
A systematic investigation of the microstructures of a series of magnesium based die cast magnesium–aluminium–rare earth (RE) alloys has been performed using X-ray diffraction analysis, scanning electron microscopy and transmission electron microscopy. The alloys had an aluminium content of 3–4 wt- and RE content of between 0·6 and 3·5 wt-. The alloys were studied in the as cast condition and after aging at 200 and 250°C. Three kinds of binary aluminium–RE phases were found in the alloys existing intergranularly. Al11RE3 was the predominant intergranular phase. In addition, Al3RE and Al2RE phases were found in the alloys with high RE content. The Al3RE phase became unstable when the alloy was aged at 200°C, while the Al11RE3 phase remained stable at 250°C. In alloys with a RE/aluminium weight ratio of <0·6, primary Al12Mg17 and aluminium enriched zones existed at the grain boundaries beside the Al11RE3 phase, both of which are considered to contribute to the reduction in creep resistance. The aluminium enriched zone transformed into Al12Mg17 precipitates when the alloys were aged. Therefore, to achieve improved creep resistance in Mg–Al–RE alloys, the RE/Al ratio should exceed 0·6.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Division of Materials Science School of Technology, Malmö University, Malmö SE- 20506, Sweden
References (22)
Show source-provided references
1. Schumann S, Friedrich H: Proc. Int. Conf. on ‘Magnesium alloys and their applications’, (ed. , Modrike B L, Kainer K U), 3–14; 1998, Wolfsburg, Werkstoff-Informationsgesellschaft.
2. Friedrich H, Schumann S: Proc. 2nd Israeli Int. Conf on ‘Magnesium science and technology – magnesium 2000’, (eds. E-Aghion and D.Eliezer), MRI, Dead Sea, Israel, 2000, 9.
3. Avedesian MM, Baker H: in ‘ASM specialty handbook’, ‘Magnesium and magnesium alloys’, 1; 1999, Materials Park, OH, ASM International.
4. 10.1002/adem.20030040310.1002/adem.200300403 ↗
5. Aune TKr, Westengen H: SAE technical paper no 950424, SAE, Detroit, MI, USA, February, 1995.
6. Sieracki EG, Velazquez JJ, Kabiri K: SAE technical paper no. 960421, SAE, Warrendale, PA, USA, 1996.
7. Dargausch MS, Dunlop GL, Pettersen K: Proc. Int. Conf. on ‘Magnesium alloys and their applications’, (ed. , Mordike B L, Kainer K U), 277–282; 1998, Wolfsburg, Werkstoff-Informationsgesellschaft.
8. Foerster G: Proc. 7th SDCE Int. Die Casting Cong., Chicago, IL, USA, October 1972, Society of Die Casting Engineers, Paper no9372.
9. Foerster G: Proc. Conf. 8th SDCE Int. Die Casting Exp. & Cong., Detroit, MI, USA, March, 1975, Society of Die Casting Engineers, Paper no G-T75–112.
10. Foerster G · Met. Eng. Q. · 1973 · 13 · 19
11. Mercer WE: SAE technical paper no. 900788, SAE, Warrendale, PA, USA, 1990.
12. 10.1016/0921-5093(95)10035-010.1016/0921-5093(95)10035-0 ↗
13. 10.1007/BF0113915610.1007/BF01139156 ↗
14. 10.1179/mst.1996.12.9.74110.1179/mst.1996.12.9.741 ↗
15. 10.1007/BF0271186410.1007/BF02711864 ↗
16. Massalski TB, Okamoto H, Subramanian PR, Kacprzak L: ‘Binary alloy phase diagrams’; 1990, Materials Park, OH, ASM international.
17. 10.1007/s11669-008-9290-310.1007/s11669-008-9290-3 ↗
18. 10.1016/0925-8388(95)01897-210.1016/0925-8388(95)01897-2 ↗
19. 10.1179/174328407X18582010.1179/174328407X185820 ↗
20. Uillars P, Calvert LU: ‘Pearson's handbook of crystallographic data for intermetallic phases’, 702; 1985, Metals Park, OH, ASM.
21. Uillars P, Calvert LU: ‘Pearson's handbook of crystallographic data for intermetallic phases’, 703; 1985, Metals Park, OH, ASM.
22. Uillars P, Calvert LU: ‘Pearson's handbook of crystallographic data for intermetallic phases’, 711; 1985, Metals Park, OH, ASM.