Structural characterisation of iron aluminide coatings prepared by chemical vapour deposition
Source abstract
Abstract
The present paper presents the results of iron aluminide coatings formed on pure iron by low pressure chemical vapour deposition. The coatings were characterised using X-ray diffraction, optical microscopy, TEM and electron microprobe analyser. Three distinct layers were seen in the optical micrographs in the coatings where deposition was carried out above the α– γ transformation temperature. The smaller thickness of the top layer compared to that of the second layer has been attributed to the smaller diffusivity of Fe compared to Al in FeAl. The formation of the third layer has been rationalised based on the fact that at deposition temperatures >1185 K, solid solution with Al above 1·5 at-% transforms to α with a definite boundary, while solid solution with less that 1·5 at-%Al will remain as γ close to the substrate. Those deposited below this temperature will remain in α at all compositions, and no boundary is formed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Science Division BARC, Mumbai 400085, India
Structural Metallurgy Section BARC, Mumbai 400085, India
Department of Metallurgical Engineering and Materials Science Indian Institute of Technology Bombay, Mumbai 400076, India
References (37)
Show source-provided references
1. Wood JH, Goldman EH:‘Protective coatings’in ‘Superalloys II’(, Sims C T, et al.), 359–384; 1987, New York, John Wiley & Sons.
2. Goward G · Surf. Coat. Technol. · 1998 · 73 · 108
3. 10.1007/BF0066296410.1007/BF00662964 ↗
4. 10.1179/mht.2001.02110.1179/mht.2001.021 ↗
5. Bayer GT · Mater. Perform. · 1995 · 34 · 34
6. 10.1016/j.surfcoat.2005.07.08010.1016/j.surfcoat.2005.07.080 ↗
7. 10.1016/j.surfcoat.2008.07.00710.1016/j.surfcoat.2008.07.007 ↗
8. 10.1016/j.surfcoat.2007.06.04610.1016/j.surfcoat.2007.06.046 ↗
9. Aguero A · Mater. Sci. Eng. Energy Syst. · 2008 · 3 · 3510.1179/174892407X248554 ↗
10. 10.1179/02670830422502223210.1179/026708304225022232 ↗
11. Xiang ZD, Datta PK: ‘Effects of pack composition on the formation of aluminide coatings on alloy steels at 650°C’, J. Mater. Sci. 2005, 40, (8), 1959–1966.10.1007/s10853-005-1217-3 ↗
12. 10.1016/j.surfcoat.2010.02.02510.1016/j.surfcoat.2010.02.025 ↗
13. 10.1016/S0022-3115(98)00792-210.1016/S0022-3115(98)00792-2 ↗
14. 10.1016/j.jnucmat.2011.03.04010.1016/j.jnucmat.2011.03.040 ↗
15. 10.1016/S0257-8972(97)00467-210.1016/S0257-8972(97)00467-2 ↗
16. John JT: ‘Chemical vapour deposition of aluminide coatings on iron’, PhD thesis, Indian Institute of Technology, Bombay, India, 2000.
17. 10.1179/mst.1986.2.3.20110.1179/mst.1986.2.3.201 ↗
18. 10.1016/0040-6090(77)90268-110.1016/0040-6090(77)90268-1 ↗
19. 10.4028/www.scientific.net/MSF.595-598.25110.4028/www.scientific.net/MSF.595-598.251 ↗
20. 10.1179/mst.1997.13.10.83210.1179/mst.1997.13.10.832 ↗
21. 10.4028/www.scientific.net/AMR.79-82.177510.4028/www.scientific.net/AMR.79-82.1775 ↗
22. 10.1016/S0921-5093(03)00076-510.1016/S0921-5093(03)00076-5 ↗
23. 10.1016/j.intermet.2010.06.02310.1016/j.intermet.2010.06.023 ↗
24. Kohlscheen J · Surf. Coat. Technol. · 2009 · 107 · 22
25. Cabrera AL · Oxid. Met. · 1991 · 36 · 2650
26. 10.1016/j.surfcoat.2008.01.02310.1016/j.surfcoat.2008.01.023 ↗
27. 10.1016/j.surfcoat.2007.07.00310.1016/j.surfcoat.2007.07.003 ↗
28. 10.1016/S0257-8972(02)00044-010.1016/S0257-8972(02)00044-0 ↗
29. 10.1016/j.intermet.2008.06.00410.1016/j.intermet.2008.06.004 ↗
30. 10.1016/j.tsf.2004.02.04210.1016/j.tsf.2004.02.042 ↗
31. 10.1016/j.tsf.2004.02.04110.1016/j.tsf.2004.02.041 ↗
32. 10.1116/1.58288210.1116/1.582882 ↗
33. Massalski T B, ed (ed.): ‘Binary alloy phase diagrams’, 112; 1986, Materials Park, OH, ASM International.
34. Hultgren R, Desai PD, Hawkins DJ, Gleser M, Kelly (eds.) KK: in ‘Selected values of the thermodynamic properties of binary alloys’, 148, 161, 192; 1973, Materials Park, OH, ASM International.
35. 10.1146/annurev.ms.07.080177.00132310.1146/annurev.ms.07.080177.001323 ↗
36. 10.1016/S0921-5093(97)00680-110.1016/S0921-5093(97)00680-1 ↗
37. Larikov LN, Geichenko VV, Falchenko VM: ‘Diffusion process in ordered alloys’; 1981, New Delhi, National Bureau of Standards.