Effects of package geometry on thermal fatigue life and microstructure of Sn–Ag–Cu solder joint
Source abstract
Abstract
Soldering experiments of chip scale package devices were carried out by means of diode laser soldering system with Sn–Ag–Cu solders. In addition, pull tests and a scanning electron microscope were used to analyse the effect of processing parameters on mechanical strength of solder joints. Viscoplastic finite element simulation was utilised to predict solder joint reliability for different package geometry under accelerated temperature cycling conditions. The results indicate that under the conditions of laser continuous scanning mode as well as the fixed soldering time, an optimal power and package geometry exists, while the optimal mechanical properties of microjoints are gained.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Adhesion, Friction, and Surface Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechatronics Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China
References (17)
Show source-provided references
1. 10.1109/24.29498610.1109/24.294986 ↗
2. 10.1007/s11664-997-0268-410.1007/s11664-997-0268-4 ↗
3. James D, Hayward A: Proc. Symp. on ‘Lasers in microelectronic manufacturing’, (ed. , Braren B, ed), 167; 1991, Bellingham, WA, SPIE.
4. Hartmann M: Proc. Symp. on ‘Lasers in microelectronic manufacturing’, (ed. , Braren B, ed), 179; 1991, Bellingham, WA, SPIE.
5. 10.1007/s11664-000-0006-710.1007/s11664-000-0006-7 ↗
6. 10.1023/A:102396880040010.1023/A:1023968800400 ↗
7. 10.1117/12.47066710.1117/12.470667 ↗
8. Wang TH · Electron. Manuf. Technol. Sympos · 2004 · 56 · 26
9. Amagai M: ‘Chip scale package (CSP) solder joint reliability and modeling’, Proc. 36th Int. Reliability Physics Symp., Reno, NV, USA, March–April 1998, IEEE, 260–268.10.1109/RELPHY.1998.670560 ↗
10. Morita Y · J. Exp. Mech · 2006 · 21 · 11
11. Darveaux R · 1995 · 379
12. Suganuma K · Trans. Nonferr. Met. Soc. China · 2006 · 16 · 137410.1016/S1003-6326(07)60023-5 ↗
13. Zahn BA: ‘Finite element based solder joint fatigue life predictions for a same die size-stacked-chip scale-ball grid array package’, Proc. IEEE/CPMT Int. Electronics Manufacturing Technology (IEMT) Symp., San Jose, CA, USA, July 2002, IEEE, 274–284.10.1109/IEMT.2002.1032767 ↗
14. Zahn BA: ‘Comprehensive solder fatigue and thermal characterization of a silicon based multi-chip module package utilizing finite element analysis methodologies’, Proc. 9th Int. ANSYS Conf., Pittsburgh, PA, USA, August 2000, ANSYS.
15. Kim KS · Electrochim. Acta · 2008 · 53 · 263710.1016/j.electacta.2007.10.038 ↗
16. 10.1016/S1003-6326(08)60141-710.1016/S1003-6326(08)60141-7 ↗
17. 10.1016/j.microrel.2009.06.00510.1016/j.microrel.2009.06.005 ↗