journal article·2009-06

Effect of Sc addition on microstructure and mechanical properties of Al–Cu–Mg–Ag–Zr alloy

D. H. Xiao, M. Song, B. Y. Huang, J. H. Yi, Y. H. He, Y. M. Li

Materials Science and Technology· Volume 25· Issue 6
Publisher page

Abstract

Al–Cu–Mg–Ag–Zr alloys containing 0, 0·1, 0·3 and 0·5 mass%Sc were prepared by ingot metallurgy and thermomechanical treatment. The effect of Sc addition on the precipitation and microstructure of the alloys has been investigated by using mechanical testing, optical microscopy, scanning electron microscopy and transmission electron microscopy. It has been shown that trace Sc element refines the grains of the casting alloys and the average grain size decreases from 85 to 30 μm. Increasing Sc content from 0·1 to 0·3% accelerates the aging hardening process, increases the maximum hardness and the yield strength of the extruded alloys from room temperature to 300°C. The high strength of the alloys with Sc is attributed to the high density and high thermal stability of fine Ω precipitates, and nanosized Al3(Sc,Zr) and AlCu(Zr,Sc) particles.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China;, Email: daihongx@mail.csu.edu.cn

State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China

References (22)

Show source-provided references
1. Vasudevan K., and Doherty R. D.: Acta Metall. 1987, 35, 1193.10.1016/0001-6160(87)90001-0 ↗
2. Zhang K. · Trans. Nonfer. Met. Soc. Chin · 2005 · 15 · 116
3. Polmear I. J. · Trans. Metall Soc. AIME · 1964 · 230 · 1331
4. 10.1007/BF0262838710.1007/BF02628387 ↗
5. Muddle B. C., and Polmear I. J.: Acta Metall Mater. 1989, 37, 777.10.1016/0001-6160(89)90005-9 ↗
6. Ringer S. P., Sakurai T., and Polmear I. J.: Acta Mater. 1997, 45, 3731.10.1016/S1359-6454(97)00039-6 ↗
7. 10.1080/0141861940824293510.1080/01418619408242935 ↗
8. Hutchinson C. R., Fan X., Pennycook S. J., and Shiflet G. J.: Acta Mater. 2001, 49, 2827.10.1016/S1359-6454(01)00155-0 ↗
9. Shiflet G. J. · Metall. Mater. Trans. A · 2006 · 37 · 1091
10. Auld J. H. · Acta Crystallogr. A · 1972 · 28 · 9810.1107/S0567740872001918 ↗
11. 10.1179/mst.1987.3.10.82710.1179/mst.1987.3.10.827 ↗
12. Garge A., and Howe M. J.: Acta Metall. 1991, 39, 1939.10.1016/0956-7151(91)90162-T ↗
13. 10.1016/S0925-8388(02)01162-310.1016/S0925-8388(02)01162-3 ↗
14. 10.1179/02670830422502197210.1179/026708304225021972 ↗
15. Norman A. F., and McEwen P. B. R. S.: Acta Mater. 1998, 46, 5715.10.1016/S1359-6454(98)00257-2 ↗
16. Yin Z. M., Pan Q. L., Zhang Y. H., and Jiang F.: Mater. Sci. Eng. A, 2000, A280, 151.10.1016/S0921-5093(99)00682-6 ↗
17. 10.1016/S1044-5803(01)00165-610.1016/S1044-5803(01)00165-6 ↗
18. Marquis E. A., and Seidman D. N.: Acta Mater. 2001, 49, 1909.10.1016/S1359-6454(01)00116-1 ↗
19. 10.1016/j.jallcom.2003.08.00310.1016/j.jallcom.2003.08.003 ↗
20. Seidman D. N., Marquis E. A., and Dunand D. C.: Acta Mater. 2002, 50, 4021.10.1016/S1359-6454(02)00201-X ↗
21. Gao Y. Z., Yin Z. M., and Pan Q. L.: Rare Earth Met. 1998, 22, 212.
22. 10.1016/0956-7151(94)90381-610.1016/0956-7151(94)90381-6 ↗