journal article·2010-05

Microstructure and polarisation behaviour of TiN–TiB2 matrix coating prepared by reactive plasma spraying

J. Ma, Z. P. Mao, B. D. Sun, J. Wang

Materials Science and Technology· Volume 26· Issue 5
Publisher page

Abstract

Two TiN–TiB2 matrix coatings were prepared by reactive plasma spraying with two spraying powders (Ti+B4C+Cr, Ti+B4C). Their microstructure, phases, microhardness and polarisation behaviours in 3·5 wt-% NaCl solution have been investigated by SEM, XRD, hardness tester and electrochemical analyser. The thermodynamics analysis for reactive plasma spraying was discussed and the effect of addition of Cr on adiabatic temperature of TiB2 forming reaction was also analysed. The thermodynamics analysis shows that the reaction temperature during reactive spraying process is >2030 K. To satisfy the criterion of self-propagating high temperature TiB2 forming reaction, the addition of Cr should be >192·6 wt-% of the total weight of Ti and B4C. The experimental results show that the addition of Cr decreases the stress in the coating so as to the cracks of coating at the expense of microhardness, yet the microhardness of both two coatings is a high value. The corrosion resistance of TiN–TiB2 matrix coating was greatly improved. The anodic polarisation curve of TiN–TiB2 coating includes a narrow activation zone and a broad passivation zone, which indicates the stability of coating is very excellent. The addition of Cr increases the corrosion potential of coating, yet an overpassivation zone appears, which is due to the breakage of passivation film.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Material, Hebei University of Science and Technology, Shijiazhuang 050018, China; State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China

State Key Laboratory of Metal Matrix CompositesShanghai Jiao Tong University, Shanghai 200240, China

References (19)

Show source-provided references
1. 10.1016/0257-8972(91)90141-I10.1016/0257-8972(91)90141-I ↗
2. 10.1016/0257-8972(94)02386-710.1016/0257-8972(94)02386-7 ↗
3. 10.1016/0257-8972(93)90024-I10.1016/0257-8972(93)90024-I ↗
4. Wagner J. · Technol · 2006 · 201 · 4247
5. 10.1016/S0040-6090(03)00858-710.1016/S0040-6090(03)00858-7 ↗
6. 10.1016/S0042-207X(02)00653-X10.1016/S0042-207X(02)00653-X ↗
7. 10.1016/j.surfcoat.2005.01.11710.1016/j.surfcoat.2005.01.117 ↗
8. 10.1016/j.wear.2005.04.00410.1016/j.wear.2005.04.004 ↗
9. 10.1016/j.electacta.2004.10.08910.1016/j.electacta.2004.10.089 ↗
10. Feng W. R. · Wear · 2005 · 806
11. Bacci T., Bertamini L., Ferrari F., Galliano F. P., and Galvanetto E. ‘Reactive plasma spraying of titanium in nitrogen containing plasma gas’, Mater. Sci Eng. A, 2000, A283,189–195.10.1016/S0921-5093(00)00704-8 ↗
12. 10.1016/j.surfcoat.2005.06.01610.1016/j.surfcoat.2005.06.016 ↗
13. Ozdemir I. · Surf Coat. Technol · 2005 · 200
14. Staia M. H., Valente T., Bartuli C., Lewis D. B., and Constable C. P. ‘Part I: characterization of Cr3C2-25%NiCr reactive plasma sprayed coatings produced at different pressures’, Surf Coat. Technol, 2001, 146 —147,553–562.10.1016/S0257-8972(01)01437-2 ↗
15. 10.1016/j.wear.2005.02.00810.1016/j.wear.2005.02.008 ↗
16. 10.1016/S0043-1648(01)00560-910.1016/S0043-1648(01)00560-9 ↗
17. Ye D. L. ‘Handbook of mineral thermodynamic data’; 1981, Beijing, Metallurgical Industry Press.
18. 10.1016/0272-8842(95)96211-710.1016/0272-8842(95)96211-7 ↗
19. 10.1016/0924-0136(95)01837-910.1016/0924-0136(95)01837-9 ↗