journal article·2019-11

Open-cell copper foam joining: Joint strength and interfacial behaviour

Nur Amirah Mohd Zahri, Farazila Yusof, Tadashi Ariga, A. S. Md. Abdul Haseeb, Muhammad Adil Mansoor, Nazatul Liana Sukiman

Materials Science and Technology· Volume 35· Issue 16
Publisher page

Abstract

A copper (Cu) foam was brazed with Cu-4.0Sn-9.9Ni-7.8P filler foil for joint strength and interface analysis. Brazed 50 pores per inch (PPI) Cu foam yielded a maximum compressive strength of 14.4 MPa with a 127% increment compared to nonbrazed Cu foam. 15 PPI Cu foam produced a maximum shear strength of 2.7 MPa. Scanning electron microscopy showed that the thickness of the brazed seam decreased with increasing the Cu foam's PPI. The formation of the Cu, Cu 3 P (P: phosphorus) and Ni 3 P (Ni: nickel) at the Cu/Cu foam interface was validated using energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction. EDX line scanning analysis revealed the diffusion of P and Ni into Cu foam, which took place via capillary force action.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Cellular and Composite Structures · Nanoporous metals and alloys · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, Kuala Lumpur, Malaysia

Centre of Advanced Manufacturing & Material Processing (AMMP Centre), University of Malaya, Kuala Lumpur, Malaysia

Department of Metallurgical Engineering, Tokai University, Hiratsuka, Japan

Department of Chemistry, School of Natural Sciences, National University of Sciences and Technology, Islamabad, Pakistan

Centre of Advanced Materials (CAM), University of Malaya, Kuala Lumpur, Malaysia

Funding

Fundamental Research Grant Scheme, FRGS University Malaya

References (29)

Show source-provided references
1. 10.1016/S1003-6326(16)64355-810.1016/S1003-6326(16)64355-8 ↗
2. 10.3390/met203026510.3390/met2030265 ↗
3. 10.1023/B:JMSC.0000040107.04387.b710.1023/B:JMSC.0000040107.04387.b7 ↗
4. 10.1007/s10934-017-0467-110.1007/s10934-017-0467-1 ↗
5. 10.2320/matertrans.M200938410.2320/matertrans.M2009384 ↗
6. 10.1016/j.vacuum.2017.10.03010.1016/j.vacuum.2017.10.030 ↗
7. 10.3390/met706020210.3390/met7060202 ↗
8. Rybar R · Metalurgica · 2016 · 55 · 489
9. 10.1016/j.apenergy.2017.04.02210.1016/j.apenergy.2017.04.022 ↗
10. 10.1016/j.ijheatmasstransfer.2012.05.07310.1016/j.ijheatmasstransfer.2012.05.073 ↗
11. 10.1002/adem.20160086110.1002/adem.201600861 ↗
12. Srivastava V.C · IIM Metal Ew · 2006 · 9 · 9
13. 10.1007/s12613-014-0959-910.1007/s12613-014-0959-9 ↗
14. 10.1007/s00542-009-0950-y10.1007/s00542-009-0950-y ↗
15. 10.1016/j.matpr.2018.04.04610.1016/j.matpr.2018.04.046 ↗
16. 10.1016/j.carbon.2017.03.09910.1016/j.carbon.2017.03.099 ↗
17. 10.1179/13621710422501221010.1179/136217104225012210 ↗
18. 10.1016/j.msea.2008.06.00710.1016/j.msea.2008.06.007 ↗
19. 10.1080/01457632.2012.65961310.1080/01457632.2012.659613 ↗
20. 10.3139/146.11037610.3139/146.110376 ↗
21. Hasap A · Weld J · 2014 · 93 · 116
22. 10.1016/j.apsusc.2015.01.07810.1016/j.apsusc.2015.01.078 ↗
23. 10.1016/j.proeng.2012.01.103310.1016/j.proeng.2012.01.1033 ↗
24. 10.3390/met609022010.3390/met6090220 ↗
25. 10.1016/j.msea.2010.02.07110.1016/j.msea.2010.02.071 ↗
26. Gnip I · Mater Sci-MEDZG · 2004 · 10 · 326
27. Zhong Z · Weld J · 2012 · 91 · 237
28. 10.4028/www.scientific.net/KEM.701.14810.4028/www.scientific.net/KEM.701.148 ↗
29. 10.1016/j.calphad.2003.10.00110.1016/j.calphad.2003.10.001 ↗