journal article·2017-11Open access

Microstructure and mechanical properties of Sn–Cu alloys for detonating and explosive cords

Guangyu Liu, Shouxun Ji, Luke Grechcini, Andrew Bentley, Zhongyun Fan

Materials Science and Technology· Volume 33· Issue 16

Abstract

To develop alloys as the substitute of Pb-based alloys for cladding materials in detonating and explosive cords, the materials requirement was analysed and Sn–Cu based alloys were selected as potential candidates. Four alloys including Sn–0.3 wt-%Cu, Sn–0.5 wt-%Cu, Sn–0.7 wt-%Cu, and Sn–1.0 wt-%Cu were prepared by casting and rolling. Microstructures of as-cast Sn–Cu alloys comprised Sn solutions with Cu6Sn5 intermetallic in the matrix. The as-rolled hypoeutectic Sn–Cu alloys (0.3–0.5 wt-%Cu) offered the yield strength from 26.1 to 31.9 MPa, UTS from 30.1 to 34 MPa and elongation from 86.4 to 87.5%, which were found to be appropriate for detonating and explosive cords. Particularly, the Sn–Cu alloys exhibited strain softening behaviour under tensile stress, which will benefit cladding manufacture and subsequent processing after assembly with high-energy explosive materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Nuclear Materials and Properties · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical, Aerospace and Civil Engineering, Brunel Centre for Advanced Solidification Technology (BCAST), College of Engineering, Design and Physical Sciences, Institute of Materials and Manufacturing, Brunel University London, Uxbridge, UK

Chemring Energetics UK Ltd, Stevenston, UK

Funding

National Aerospace Technology Exploitation Programme · Chemring Energetics UK

References (59)

Show source-provided references
1. Bai X · Mater Sci Eng A · 2012 · 55 · 142
2. Brophy GE. Aircraft cockpit canopy. United States patent US 4580745. 1986.
3. Deplante H. Method and device related to the ejection of a person from an aircraft cockpit or the like. United States patent US 3729154A. 1973.
4. Noddin GA, Mantua NJ. Non-rupturing detonating cords. United States patent US 3311056. 1967.
5. 10.1007/s00193-003-0185-210.1007/s00193-003-0185-2 ↗
6. 10.1016/j.ijimpeng.2008.07.02710.1016/j.ijimpeng.2008.07.027 ↗
7. Andrew DJ, Felch RW, Noddin GA. Connecting cord. United States patent US 2982210A. 1961.
8. Commission of the European Communities, Council Directive 96/22/EC. Off Eur Commun Legis. 1966; L125:3.
9. Humphrey WA · 1978
10. Novotney D, Mallery M. Historical development of linear shaped charge. 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Joint Propulsion Conferences; 2007.10.2514/6.2007-5141 ↗
11. Blaskett · 1990
12. 10.1016/j.msea.2004.05.07810.1016/j.msea.2004.05.078 ↗
13. 10.1016/j.jallcom.2006.02.05310.1016/j.jallcom.2006.02.053 ↗
14. 10.1016/j.physb.2004.01.15910.1016/j.physb.2004.01.159 ↗
15. 10.1016/S0261-3069(99)00095-310.1016/S0261-3069(99)00095-3 ↗
16. 10.1179/mst.1992.8.2.10210.1179/mst.1992.8.2.102 ↗
17. 10.1016/S0921-4526(02)02640-610.1016/S0921-4526(02)02640-6 ↗
18. 10.1016/0022-5096(53)90003-910.1016/0022-5096(53)90003-9 ↗
19. 10.1016/j.ijrmhm.2015.07.02210.1016/j.ijrmhm.2015.07.022 ↗
20. Pratt DW, Wesson DS, Rouse JK. Shaped-charge liner. United States patent US 6354219. 2002 Mar 12.
21. 10.1016/j.scriptamat.2008.10.02810.1016/j.scriptamat.2008.10.028 ↗
22. 10.1016/S0921-5093(02)00721-910.1016/S0921-5093(02)00721-9 ↗
23. 10.1007/s11661-002-0208-010.1007/s11661-002-0208-0 ↗
24. 10.1002/prep.20120018810.1002/prep.201200188 ↗
25. 10.1260/13694330878641200510.1260/136943308786412005 ↗
26. Han H · Powder Metall Industry · 2004 · 3 · 1
27. 10.1023/B:JMSC.0000013870.09241.c010.1023/B:JMSC.0000013870.09241.c0 ↗
28. 10.1016/j.matdes.2014.07.03510.1016/j.matdes.2014.07.035 ↗
29. 10.1007/s11664-002-0204-610.1007/s11664-002-0204-6 ↗
30. 10.1016/j.matdes.2013.03.01010.1016/j.matdes.2013.03.010 ↗
31. 10.1016/j.matdes.2012.06.05810.1016/j.matdes.2012.06.058 ↗
32. 10.1016/j.msea.2013.01.04910.1016/j.msea.2013.01.049 ↗
33. 10.1007/s10853-006-0892-z10.1007/s10853-006-0892-z ↗
34. 10.1016/j.msea.2012.07.07310.1016/j.msea.2012.07.073 ↗
35. 10.1016/j.jallcom.2011.05.11910.1016/j.jallcom.2011.05.119 ↗
36. 10.1016/j.microrel.2008.11.01410.1016/j.microrel.2008.11.014 ↗
37. 10.1016/j.actamat.2010.11.03210.1016/j.actamat.2010.11.032 ↗
38. 10.1007/s11664-008-0545-x10.1007/s11664-008-0545-x ↗
39. Hunt JD · Trans Metall AIME · 1966 · 236 · 843
40. 10.1016/j.jallcom.2016.09.07810.1016/j.jallcom.2016.09.078 ↗
41. 10.1179/imtr.1979.24.1.17710.1179/imtr.1979.24.1.177 ↗
42. 10.1007/BF0264895210.1007/BF02648952 ↗
43. 10.1016/j.matchemphys.2011.11.03310.1016/j.matchemphys.2011.11.033 ↗
44. 10.1007/s11664-004-0159-x10.1007/s11664-004-0159-x ↗
45. 10.1179/174328405X1404710.1179/174328405X14047 ↗
46. 10.1088/0370-1301/64/9/30310.1088/0370-1301/64/9/303 ↗
47. Petch NJ. · J Iron Steel Inst · 1953 · 174 · 25
48. 10.1016/j.scriptamat.2004.10.03510.1016/j.scriptamat.2004.10.035 ↗
49. 10.1007/s11661-004-0241-210.1007/s11661-004-0241-2 ↗
50. 10.1016/S1359-6454(03)00169-110.1016/S1359-6454(03)00169-1 ↗
51. 10.1016/j.msea.2003.11.08610.1016/j.msea.2003.11.086 ↗
52. 10.1016/0921-5093(93)90638-U10.1016/0921-5093(93)90638-U ↗
53. 10.1016/j.actamat.2005.09.01210.1016/j.actamat.2005.09.012 ↗
54. 10.1016/1359-6454(95)00160-110.1016/1359-6454(95)00160-1 ↗
55. 10.1016/j.msea.2007.08.08610.1016/j.msea.2007.08.086 ↗
56. 10.1016/j.scriptamat.2016.05.03810.1016/j.scriptamat.2016.05.038 ↗
57. 10.4028/www.scientific.net/KEM.626.4610.4028/www.scientific.net/KEM.626.46 ↗
58. 10.1016/j.pmatsci.2013.09.00210.1016/j.pmatsci.2013.09.002 ↗
59. 10.1007/s11661-999-0009-910.1007/s11661-999-0009-9 ↗