Microstructure and microhardness of pearlitic steel after laser shock processing and annealing
Source abstract
Abstract
The microstructure evolution of the high carbon pearlitic steel after laser shock processing (LSP) with different laser pulse energy and high temperature annealing was investigated. After LSP, the cementite lamella were bent, fractured and broken into granules. Fragmentation and dissolution of the cementite lamella were enhanced by increasing the laser pulse energy. Results show that the ferrite lattice parameter increased due to carbon atom dissolution in the ferrite matrix, and the corresponding ferrite X-ray diffraction peaks shifted significantly towards the smaller diffraction angles. After annealing at 650°C for 30 min, an ultrafine duplex microstructure (ferrite+cementite) was formed on the surface. After LSP with a high energy, equiaxed ferrite grains were refined to 400 nm and the cementite lamella were fully spheroidised with the particle diameter of ∼150 nm. The corresponding grain size of ferrite and cementite under low pulse energy was 500 and 300 nm respectively. After annealing, the ferrite peaks significantly shifted towards the higher diffraction angles, and the ferrite lattice parameter decreased. The microhardness initially increases after LSP and then slightly decreases after subsequent annealing but remained higher than without LSP.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang 471003, China
Collaborative Innovation Center of Nonferrous Metals, Henan Province, Luoyang 471003, China
Institute of Metals Research, Chinese Academy of Sciences, Shenyang 110016, China
Department of Mechanical Engineering, University of South Florida, Tampa, FL 33620, USA
References (31)
Show source-provided references
1. 10.2355/isijinternational.45.39210.2355/isijinternational.45.392 ↗
2. 10.2355/isijinternational.44.17110.2355/isijinternational.44.171 ↗
3. Wang J. T., Huang J. X., De Z. Z., Zhang Z., and Zhao X. C. ‘Microstructure transformation in a pearlite steel during equal channel angular pressing’, in ‘Ultrafine grained materials III’ (ed. Zhu Y. T.), 673–678; 2004, Warrendale, PA, TMS.
4. 10.1016/j.msea.2013.04.07010.1016/j.msea.2013.04.070 ↗
5. Wang X. · Mater. Sci. Eng. A · 2013 · 578 · 110.1016/j.msea.2013.04.058 ↗
6. 10.1016/j.actamat.2010.03.02610.1016/j.actamat.2010.03.026 ↗
7. 10.1016/j.msea.2010.01.07610.1016/j.msea.2010.01.076 ↗
8. 10.1016/j.corsci.2013.11.00310.1016/j.corsci.2013.11.003 ↗
9. 10.1016/j.jmatprotec.2012.01.02310.1016/j.jmatprotec.2012.01.023 ↗
10. 10.1016/j.optlastec.2012.06.01910.1016/j.optlastec.2012.06.019 ↗
11. 10.1016/j.optlastec.2014.05.02810.1016/j.optlastec.2014.05.028 ↗
12. 10.1016/j.surfcoat.2013.01.03510.1016/j.surfcoat.2013.01.035 ↗
13. 10.1016/j.msea.2013.04.03410.1016/j.msea.2013.04.034 ↗
14. 10.1016/j.apsusc.2010.09.00210.1016/j.apsusc.2010.09.002 ↗
15. 10.1016/j.actamat.2011.07.07010.1016/j.actamat.2011.07.070 ↗
16. 10.1016/j.msea.2011.12.09110.1016/j.msea.2011.12.091 ↗
17. 10.1016/j.msea.2012.11.06810.1016/j.msea.2012.11.068 ↗
18. 10.1016/j.msea.2012.07.10510.1016/j.msea.2012.07.105 ↗
19. 10.1016/j.msea.2014.01.03710.1016/j.msea.2014.01.037 ↗
20. 10.1016/j.matlet.2008.01.05510.1016/j.matlet.2008.01.055 ↗
21. 10.1016/j.actamat.2004.10.05110.1016/j.actamat.2004.10.051 ↗
22. 10.1016/S0921-5093(02)00358-110.1016/S0921-5093(02)00358-1 ↗
23. 10.1016/S1359-6462(99)00372-310.1016/S1359-6462(99)00372-3 ↗
24. 10.1016/j.msea.2006.05.14810.1016/j.msea.2006.05.148 ↗
25. Fu W. T. · J. Mater. Sci. Technol · 2005 · 21 · 25
26. Scherpereel X., Peyre P., Fabbro R., Lederer G., and Celati N. ‘Modification of electrochemical properties of stainless-steel by laser shock processing’, in ‘3rd International Meeting on Computer Methods and Experimental Measurements for Surface Treatment Effects’, (ed. Aliabadi E. M. H), 83–92; 1997, England, Oxford.
27. 10.1007/BF0032647710.1007/BF00326477 ↗
28. Fasiska E. J. · Trans. Metall. Soc. AIME · 1967 · 239 · 1818
29. 10.1016/j.msea.2013.01.06810.1016/j.msea.2013.01.068 ↗
30. Huang Q. S. · Acta Metall. Sinica · 2007 · 7 · 724
31. Chen W. · Acta Metall. Sinica · 2009 · 5 · 151