journal article·2015-01

Study of fatigue properties of forged BT25 titanium alloy based on fractographic and quantitative microstructural analysis

Y. Wang, W. D. Zeng, X. Ma, J. H. Zhou, X. Y. Wang, T. Wang

Materials Science and Technology· Volume 31· Issue 2
Publisher page

Abstract

The high cycle fatigue (HCF) properties of forged BT25 titanium alloy was examined by fractographic and quantitative microstructural analysis. Two different height reductions (50 and 80) were applied to the isothermal compression of BT25 alloy with initial lamellar microstructure. Fatigue limits obtained through up and down method were 440 and 450 MPa respectively. Microstructural analysis showed that the globularisation volume fraction of the two microstructures (MA represents the microstructure of the alloy with the height reduction of 50, while MB is used for 80) were 62·72 and 84·13 respectively. There was more lamellar α in which Feret ratio was greater than 3·5 remained in MA, 16·96. Hence, a larger globularisation volume fraction is more beneficial for resistance to fatigue failure. The fracture surfaces of the failed testing specimens were examined and the fatigue crack initiation mechanisms were discussed. Cracks initiated in grains by means of constituting extrusions through combined glide and dislocation annihilation in slip bands, while those initiating along the α/ β phase interface arose from discordant deformation of α and β phases with different Young's modulus.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Solidification Processing, School of Materials, Northwestern Polytechnical University, Xi'an 710072, China

Baosteel Special Material Co., Ltd, Shanghai 200940, China

References (28)

Show source-provided references
1. 10.1016/j.ijfatigue.2007.01.04610.1016/j.ijfatigue.2007.01.046 ↗
2. Boyce MP: in ‘Gas turbine engineering handbook’, 4nd edn, Chap. 1, ‘An overview of gas turbines’, 3–88; 2012, Waltham, MA, Butterworth-Heinemann Ltd.10.1016/B978-0-12-383842-1.00001-9 ↗
3. 10.1007/BF0001266710.1007/BF00012667 ↗
4. 10.1007/BF0001267010.1007/BF00012670 ↗
5. 10.1016/j.msea.2007.02.06410.1016/j.msea.2007.02.064 ↗
6. 10.1016/j.ijfatigue.2012.03.00810.1016/j.ijfatigue.2012.03.008 ↗
7. 10.1016/S0921-5093(97)00778-810.1016/S0921-5093(97)00778-8 ↗
8. 10.1016/j.msea.2008.03.04110.1016/j.msea.2008.03.041 ↗
9. 10.1007/s11661-003-0103-310.1007/s11661-003-0103-3 ↗
10. 10.1007/s11661-004-0246-x10.1007/s11661-004-0246-x ↗
11. 10.1016/S0921-5093(01)01531-310.1016/S0921-5093(01)01531-3 ↗
12. Moiseyev VN: in ‘Titanium alloys: Russian aircraft and aerospace applications’, 1st edn, Chap. 3, ‘High-temperature titanium alloys’, 121–140; 2006, Boca Raton, FL, CRC Press.10.1201/9781420037678 ↗
13. 10.1016/j.msea.2012.03.02210.1016/j.msea.2012.03.022 ↗
14. 10.1016/j.msea.2012.03.01110.1016/j.msea.2012.03.011 ↗
15. ‘Metallic materials–fatigue testing–ftatistical planning and analysis of data’, Part 3, ‘Terms and definitions’, ISO 12107:2003, ISO, Geneva, Switzerland, 2003.
16. 10.1016/j.ijfatigue.2008.06.00410.1016/j.ijfatigue.2008.06.004 ↗
17. Zheng XL, Wang H, Yan JH and Yi XW: ‘Theory of material fatigue and engineering application’, 1st edn, Chap. 12, ‘Statistical methods for fatigue testing data’, 310–311; 2013, Beijing, Science Press.
18. 10.1016/j.matdes.2012.10.05910.1016/j.matdes.2012.10.059 ↗
19. 10.1016/j.actamat.2011.03.03710.1016/j.actamat.2011.03.037 ↗
20. 10.1016/S0921-5093(98)01156-310.1016/S0921-5093(98)01156-3 ↗
21. 10.1016/j.msea.2007.04.06210.1016/j.msea.2007.04.062 ↗
22. 10.1016/j.msea.2013.03.04710.1016/j.msea.2013.03.047 ↗
23. 10.1016/S0261-3069(03)00083-910.1016/S0261-3069(03)00083-9 ↗
24. 10.1016/j.msea.2010.06.08610.1016/j.msea.2010.06.086 ↗
25. Suresh S: in ‘Fatigue of materials’, 1st edn, Chap. 3, ‘Fatigue crack initiation in ductile solids’, 104–108; 1991, Cambridge, Cambridge University Press.
26. 10.1007/BF0264551210.1007/BF02645512 ↗
27. 10.1016/j.ijfatigue.2009.10.00510.1016/j.ijfatigue.2009.10.005 ↗
28. 10.1016/0025-5416(76)90009-410.1016/0025-5416(76)90009-4 ↗