Influence of aluminium on carbide precipitation in low carbon microalloyed steels
Source abstract
Abstract
Precipitation in an 0·1C–0·5Si–1·5Mn–0·15Mo–0·5Ni–0·05V–Fe(wt-%) alloy containing from 0·04 to 0·2 wt-%Al was examined in the tempered condition. After hot rolling, the steels were solution treated at 1200°C for 2 h, then quenched in water. Tempering was mainly carried out at 600 or 650°C for 1 h. The precipitates were identified and measured using transmission electron microscopy and energy dispersive X-ray analysis. It was found that coarsening of Fe3C carbides in the prior austenite grain boundaries was associated with low Al content, while the size of Fe3C particles in the lath boundaries was independent of Al content. It is proposed that Al segregated to the prior austenite grain boundaries during solution treatment, associated with vacancies, and decreased the rate of vacancy migration, thereby retarding the coarsening of cementite.MST/1707
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. 10.1002/pssa.221013024410.1002/pssa.2210130244 ↗
2. 10.1007/BF0264638310.1007/BF02646383 ↗
3. I. W. MARTIN: personal commmunication, BSC Swinden Laboratories, 1992.
4. S. GODA, H. GONDO, and Y. ONO: ‘Manufacture of high strength high toughness low temperature steels’, Japan Patent no. 41-6886, Nippon Steel Corporation, Yawata Works, 19 April 1967.
5. WATANABE I. · Nippon Kokan Tech. Rep. (Overseas) · 1986 · 47 · 52
6. J. M. TITCHMARSH: Harwell Report AERE/R966I, Harwell Laboratories, 1979.
7. F. B. PICICERING: in ‘Precipitation processes in steels’, 23; 1959, London, The Iron and Steel Institute.
8. 10.1007/BF0265024710.1007/BF02650247 ↗
9. 10.1179/mst.1989.5.2.15510.1179/mst.1989.5.2.155 ↗
10. I. KAUR, W. GUST, and L. KOZMA: ‘Handbook of grain and interphase boundary diffusion data’, 536; 1989, Stuttgart, Ziegler Press.
11. A. SEEGER and H. MEHRER: in Proc. Conf. ‘Vacancies and interstitials in metals’, 45; 1970, Julich, Germany, North-Holland.
12. G. W. GREENWOOD: in Proc. Conf. ‘Vacancies '76’, 141; 1977, London, The Metals Society.
13. KELLY A. · Prog. Mater. Scl., · 1961 · 3 · 149
14. I. KAUR, W. GUST, and L. KOZMA: ‘Handbook of grain and interphase boundary diffusion data’, 622; 1989, Stuttgart, Ziegler Press.
15. 10.1016/0022-3697(61)90054-310.1016/0022-3697(61)90054-3 ↗
16. WAGNER C. · Z. Elektrochem., · 1961 · 65 · 581
17. H. XUE: MPhil. thesis, University of Strathclyde, 1991.
18. W. C. LESLIE: ‘The physical metallurgy of steels’, Chap. 3; 1981, New York, Hemisphere McGraw-Hill.
19. KONIG P. · Arch. Eisenhiittenwes., · 1961 · 32 · 541
20. D. E. STEIN and L. A. HELDT: in Proc. Seminar ‘Interfacial segregation’, 239; 1977, Metals Park, OH, ASM.