Extruded microstructure of Zn–5 wt-Al eutectic alloy processed by twin screw extrusion
Source abstract
Abstract
Semisolid extrusion with twin screw extruder has been successfully developed for eutectic alloy. In this process, the eutectic melt is sheared and cooled down inside the twin screw extruder to a semisolid state and simultaneously extruded through an open die at a temperature close to solidus. The accurate control of heat balance in the extruder results in the formation of two solid phases and one liquid phase in the Zn–5 wt-Al eutectic alloy. A little plastic deformation in the extruded alloy can be introduced by twin screw extrusion. In semisolid extrusion, the particle size in Zn–5 wt-Al eutectic alloy is close to 40 μm for Zn rich particles and 25 μm for Al rich particles. Two solid particles are at the similar size in longitudinal and transverse directions and distribute uniformly and independently on the whole cross-section of the extruded bar. The remnant liquid can act as lubricant for reducing extrusion force during extrusion and solidify in lamellar morphology between Al rich and Zn rich particles.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Brunel Centre for Advanced Solidification Technology (BCAST), Brunel University, Uxbridge UB8 3PH, UK
References (24)
Show source-provided references
1. DavisJR, Semiatin SL: in ‘ASM handbook’, 9th edn, Vol. 14, ‘Forming and forging’; 1989, Materials Park, OH, ASM International.
2. 10.1007/BF0266109010.1007/BF02661090 ↗
3. 10.1179/imr.1994.39.5.17310.1179/imr.1994.39.5.173 ↗
4. 10.1179/09506600122500107610.1179/095066001225001076 ↗
5. 10.1007/s11837-006-0173-y10.1007/s11837-006-0173-y ↗
6. Kiuchi M, Sugiyama S: Proc. 3rd Int. Conf. on ‘Semisolid processing of alloys and composites’, (ed. , Kiuch M, ed), 245–251; 1994, Tokyo, Institute of Industrial Science, University of Tokyo.
7. R. Kopp, H. P. Mertens, M. Wimmer, G. Winning, N. Witulski: Proc. 5th Int. Conf. on ‘Semi-Solid Processing of Alloys and Composites’, Golden, Colorado, (ed. A. K. Bhasin, J. J. Moore, K. P. Young, S. Midson), 1998, Golden, Colorado U.S.A, Colorado School of Mines, 283–289.
8. 10.1016/0924-0136(94)90041-810.1016/0924-0136(94)90041-8 ↗
9. 10.1016/S0924-0136(01)00738-510.1016/S0924-0136(01)00738-5 ↗
10. 10.4028/www.scientific.net/MSF.426-432.50710.4028/www.scientific.net/MSF.426-432.507 ↗
11. S. Sugiyama, J. L. Kuo, S. H. Hsiang and J. Yanagimoto: in Proceedings of the 35th International MATADOR Conference, (Ed. Hinduja, Srichand; Fan, Kuang-Chao), 2007, Taipei, China, National University of Taiwan, 115–118.10.1007/978-1-84628-988-0_25 ↗
12. 10.1016/S1003-6326(10)60571-710.1016/S1003-6326(10)60571-7 ↗
13. Rattanochaikul T · J. Met. Mater. Miner. · 2010 · 20 · 17
14. 10.1016/S1003-6326(09)60371-X10.1016/S1003-6326(09)60371-X ↗
15. Z. Fan, S. Ji, M.J. Bevis: ‘Method and apparatus for making metal alloy castings’ WIPO, IPN:WO02/13993 A1, IAN:PCT/GB01/03596, IPD:21/02/2002.
16. K. Roberts, X. Fang, S. Ji, Z. Fan: Proc. 7th Int. Conf. on ‘Semi-Solid Processing of Alloys and Composites’, (ed. Y. Tsutsui, M. Kiuchi, K. Ichikawa), 2002, Tsukuba, Japan, National Institute of Advanced Industrial Science and Technology and the Japan Society for Technology of Plasticity, 689–694.
17. 10.1007/s11661-008-9713-010.1007/s11661-008-9713-0 ↗
18. 10.1007/s11661-006-0049-310.1007/s11661-006-0049-3 ↗
19. 10.1007/BF0266109010.1007/BF02661090 ↗
20. 10.1007/BF0055932210.1007/BF00559322 ↗
21. 10.1007/BF0114549910.1007/BF01145499 ↗
22. 10.1179/msc.1978.12.12.57610.1179/msc.1978.12.12.576 ↗
23. A. Hellawell: Proc. 4th Int. Conf. on ‘Semi-Solid Processing of Alloys and Composites’, (ed. D. H. Kirkwood, P. Kapranos), 1996, Sheffield, UK, University of Sheffield, 60–66.
24. 10.1007/BF0264776310.1007/BF02647763 ↗