journal article·2005-08

Development of nanocrystalline Fe–Co alloys using mechanical alloying

J. Zhu, M. Mujahid

Materials Science and Technology· Volume 21· Issue 8
Publisher page

Abstract

Nanostructured alloys have considerable potential as soft magnetic materials. In these materials a small magnetic anisotropy is desired, which necessitates the choice of cubic crystalline phases of Fe, Co, Ni, etc. In the present work, Fe–50 at.-%Co alloys were prepared using mechanical alloying (MA) in a planetary ball mill under a controlled environment. The influence of milling parameters on the crystallinity and crystal size in the alloys was studied. The particle size and morphology were also investigated using SEM. In addition, a thermal treatment was employed for partial sintering of some of the MA powders. The crystal size in both MA powders and compacted samples was measured using X-ray diffraction. It was shown that the crystal size could be reduced to less than 15 nm in these alloys. The nanocrystalline material obtained was also evaluated for magnetic behaviour.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Z. L. Wang: ‘Characterization of nanophase materials’; 2000, New York, Wiley-VCH.10.1002/3527600094 ↗
2. 10.1016/S1359-6454(99)00296-710.1016/S1359-6454(99)00296-7 ↗
3. 10.1016/0956-716X(95)00397-E10.1016/0956-716X(95)00397-E ↗
4. 10.1016/S1359-6462(01)00788-610.1016/S1359-6462(01)00788-6 ↗
5. 10.1016/S0254-0584(00)00289-310.1016/S0254-0584(00)00289-3 ↗
6. 10.1016/S0925-8388(02)00512-110.1016/S0925-8388(02)00512-1 ↗
7. 10.1016/0965-9773(95)00027-510.1016/0965-9773(95)00027-5 ↗
8. 10.1016/S0079-6425(99)00010-910.1016/S0079-6425(99)00010-9 ↗
9. 10.1016/S1359-6454(99)00285-210.1016/S1359-6454(99)00285-2 ↗
10. R. M. German: ‘Powder metallurgy science’; 1994, Princeton, NJ, MPIF.
11. D. Hies: ‘Introduction to magnetism and magnetic materials’; 1991, New York, Chapman and Hall.