Laser and GTAW torch processing of Fe–Cr–B coatings on steel
Source abstract
Abstract
A comparison has been made of the relationship between microstructure and microhardness developed by surface melting Nanosteel SHS 7170 Fe–Cr–B alloy powder onto a plain carbon steel surface. This powder was initially developed as a high velocity oxyfuel sprayed coating, giving a strength 10 times that of mild steel, and is particularly suitable for surface protection against wear and corrosion. In the present study, the alloy powder was injected into the laser melted surface, while a preplaced powder was melted using the gas tungsten arc welding (GTAW) technique. The laser track consisted of fine dendrites and needle-like microstructures, which produced a maximum hardness value of over 800 HV, while the GTAW track produced a mixture of equiaxed and columnar grain microstructures with a maximum hardness value of 670 HV. The lower hardness values are considered to be associated with dilution and grain size.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Advanced Materials and Surface Engineering Research Unit, Department of Manufacturing and Materials Engineering, International Islamic University of Malaysia, PO Box 10, Kuala Lumpur 50728, Malaysia
Department of Mechanical and Aerospace Engineering, James Weir Building, University of Strathclyde, Glasgow G1 1XJ, UK
References (30)
Show source-provided references
1. Ion JC: ‘Laser processing of engineering materials’; 2005, Amsterdam, Elsevier.10.1016/B978-075066079-2/50009-X ↗
2. 10.1533/978184569945110.1533/9781845699451 ↗
3. Toyserkani AKE and Corbin S: ‘Laser cladding’; 2005, Boca Raton, FL, CRC Press LLC.10.1201/9781420039177 ↗
4. 10.1016/S0257-8972(99)00141-310.1016/S0257-8972(99)00141-3 ↗
5. 10.1016/S0257-8972(03)00811-910.1016/S0257-8972(03)00811-9 ↗
6. 10.1016/S0924-0136(01)00609-410.1016/S0924-0136(01)00609-4 ↗
7. 10.1016/j.apsusc.2005.02.08810.1016/j.apsusc.2005.02.088 ↗
8. 10.1016/j.jallcom.2006.03.08310.1016/j.jallcom.2006.03.083 ↗
9. 10.1016/j.jmatprotec.2005.02.24710.1016/j.jmatprotec.2005.02.247 ↗
10. Mridha S · IJMME · 2012 · 7 · 48
11. 10.1016/j.surfcoat.2006.01.04010.1016/j.surfcoat.2006.01.040 ↗
12. 10.1081/AMP-12002249710.1081/AMP-120022497 ↗
13. 10.1023/B:JMSC.0000007750.16970.4e10.1023/B:JMSC.0000007750.16970.4e ↗
14. Chokethawai K: ‘Microstructural evolution in Fe–Cr–B based alloy powder and thermally sprayed coatings and their wear performance’, PhD thesis, University of Nottingham, Nottingham, UK, 2010.
15. Branagan DJ · Adv. Mater. Processes · 2011 · 169 · 33
16. http://nanosteelco.com/
17. 10.1016/j.jallcom.2009.02.03510.1016/j.jallcom.2009.02.035 ↗
18. 10.1016/j.surfcoat.2010.10.02910.1016/j.surfcoat.2010.10.029 ↗
19. Schneider M: ‘Laser cladding with powder, effect of some machining parameters on clad properties’, 1998, PhD thesis, University of Twente, Enschede, The Netherlands.
20. 10.1179/1743284713Y.000000043510.1179/1743284713Y.0000000435 ↗
21. 10.1361/10599639977035029610.1361/105996399770350296 ↗
22. Easterling KE: ‘Introduction to physical metallurgy of welding’; 1992, London, Butterworth-Heinemann.
23. 10.1016/S0924-0136(96)02660-X10.1016/S0924-0136(96)02660-X ↗
24. 10.1179/02670849910151653310.1179/026708499101516533 ↗
25. 10.1016/j.jmatprotec.2006.03.11010.1016/j.jmatprotec.2006.03.110 ↗
26. 10.4028/www.scientific.net/AMR.264-265.142710.4028/www.scientific.net/AMR.264-265.1427 ↗
27. 10.4028/www.scientific.net/AMR.445.65510.4028/www.scientific.net/AMR.445.655 ↗
28. Kurz W: ‘Fundamentals of solidification’, 3rd rev. edn. 1989, Dürnten, Trans Tech. Publication Ltd.
29. Colaco R · High Temp. Chem. Processes · 1994 · 3 · 21
30. 10.1016/j.matdes.2003.08.00610.1016/j.matdes.2003.08.006 ↗