journal article·2011-03

Effective thermal conductivity of Cu/diamond composites containing connected particles

H. Chen, K. Chu, C. C. Jia, X. B. Liang, H. Guo, X. H. Qu

Materials Science and Technology· Volume 27· Issue 3
Publisher page

Abstract

An analytical model for the thermal conductivity of Cu/diamond composites with connected particles is presented by replacement of a cluster of connected particles with an equivalent polycrystal subsequently using a multiple effective medium approach. By applying this model to the measured thermal conductivity of Cu/diamond composites prepared by high pressure high temperature sintering technique reported in the literature, we show that it quite well describes the observed thermal conductivity enhancement induced by the connected particles. We estimate the value of connected particle loading in real composites and show that large particles are easier to form the bonding contact than small particles. The present work also demonstrates that the sensitivity of thermal conductivity contribution from the connected particles strongly depends on the particle size, and their pronounced thermal conductivity enhancement should lie within the certain particle size range.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Thermal properties of materials · Numerical methods in engineering · Composite Material Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China

Beijing General Research Institute for Nonferrous Metals, Beijing 100088, China

References (15)

Show source-provided references
1. Zwebcn C. Adv. Mater. Processes, 2005, 163, 33–37.
2. Yoshida K., and Morigami H. Microelectron. Reliab., 2004, 44, 303–308.10.1016/S0026-2714(03)00215-4 ↗
3. Ekimov E. A., Suetin N. V., Popovich A. F., and Ralchenko V. G. Diamond Relat. Mater., 2008, 17, 838–843.10.1016/j.diamond.2007.12.051 ↗
4. Schubert T., Ciupinski L., Zielinski W., Michalski A., Weissgarbera T., and Kieback B. Scr. Mater., 2008, 58, 263–266.10.1016/j.scriptamat.2007.10.011 ↗
5. Schubert T., Trindade B., Weissgarber T., and Kieback B. Mater. Sci. Eng. A, 2008, A475, 39–44.10.1016/j.msea.2006.12.146 ↗
6. Weber L., and Tavangar R. Scr. Mater., 2007, 57, 988–991.10.1016/j.scriptamat.2007.08.007 ↗
7. Chu K., Jia C. C., Liang X. B., Chen H., Gao W. J., and Guo H. Mater. Design, 2009, 30, 4311 4316.10.1016/j.matdes.2009.04.019 ↗
8. Hasselman D. P. H., and Johnson L. F. J. Compos. Mater., 1987, 21, 508.10.1177/002199838702100602 ↗
9. Nan C. W., and Birringer R. Phys. Rev. B, 1998, 57B, 8264–8268.10.1103/PhysRevB.57.8264 ↗
10. Chu K., Jia C. C., Liang X. B., Chen H., Guo H., Yin F. Z., and Qu X. H. J. Mater. Sci., 2009, 44, 4370–4378.10.1007/s10853-009-3655-9 ↗
11. Benveniste Y. J. Appl Phys., 1987, 61, 2840–2843.10.1063/1.337877 ↗
12. Swartz E. T., and Pohl R. O. Rev. Mod. Phys., 1989, 61. 605–668.10.1103/RevModPhys.61.605 ↗
13. Chu K., Jia C. C., Liang X. B., Chen H., and Guo H. Mater. Design. 2009, 30, 3497–3503.10.1016/j.matdes.2009.03.009 ↗
14. Yang H. S., Bai G. R., and Thompson L. J. Acta Mater., 2002, 50, 2309–2317.10.1016/S1359-6454(02)00057-5 ↗
15. Kidalov S. V., Shakhov F. M., and Vul A.Ya. Diamond Relat. Mater., 2008, 17, 844–847.10.1016/j.diamond.2008.01.091 ↗