journal article·1989-02

Metastable phase formation in rapidly solidified Al–Mo alloys

E. A. Logan, J. N. Pratt, M. H. Loretto

Publisher page

Abstract

In Al-Mo alloys, rapidly quenched from the melt at rates of approximately 106 KS−1, it has been demonstrated that single phase solid solution alloys can be obtained in materials with up to 1·3 at.-%Mo. Above this concentration, two new metastable phases are observed in the form of small precipitates within the matrix of aluminium-rich solid solution. These have been identified as a diamond cubic phase, space group Fd3m, a =1·4–1·5 nm and a hexagonal phase, space group P6/mmm or P6/mmc, a = 0·45 nm, c = 0·27 nm. The maximum supersaturation of the solid solution matrix, obtained in alloys containing such precipitates, was found to be 2·45 at.-%Mo. Upon annealing, both the solid solutions and the metastable intermediate phases decompose directly to the equilibrium structure of aluminium-rich solid solution and Al12Mo. The Al12Mo forms either as precipitates on the grain boundaries or as a layer around the metastable intermediate phases. From a good correlation between the maximum supersaturation obtained and that predicted by consideration of thermodynamic and kinetic factors it is suggested that a similar theoretical treatment may be used to provide an indication of the maximum supersaturation achievable in other systems.MST/824
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. POLESYA A. F. · Phys. Met. Metallogr. (USSR) · 1969 · 27 · 122
2. POLESYA A. F. · Phys. Met. Metallogr. (USSR) · 1970 · 30 · 35
3. BELYAEVA G. I. · Phys. Chem. Prop. Electrolytes · 1969 · 7 · 68
4. R. HULTGREN, P.O. DESAI, D. T. HAWKINS, M. GLAISER, and K. K. KELLEY: ‘Selected values of the thermodynamic properties of the elements and alloys’, 90, 189; 1973, Metals Park, OH, American Society for Metals.
5. 10.1149/1.212363010.1149/1.2123630 ↗
6. 10.1007/BF0264633410.1007/BF02646334 ↗
7. 10.1016/0022-5088(76)90215-010.1016/0022-5088(76)90215-0 ↗
8. BREWER L. · At. Energy Rev. Special Issue, · 1980 · 113.
9. BREWER L. · At. Energy Rev. Special Issue, · 1980 · 195.
10. VIGDOROVICH V. N. · IZV. VUZ Tsvetn. Metall, · 1960 · 2 · 143
11. RAND M. H. · Physica · 1981 · 103 · 21
12. 10.1063/1.170043510.1063/1.1700435 ↗
13. 10.1179/imr.1983.28.1.18910.1179/imr.1983.28.1.189 ↗
14. FALKENHAGEN G. · Z. Metallkd., · 1952 · 43 · 69
15. J. W. CHRISTIAN: ‘Phase transformations’, (ed. R. W. Cahn), chap. 10; 1970, Amsterdam, North Holland.
16. 10.1080/0141861880821440910.1080/01418618808214409 ↗
17. 10.1016/0025-5416(67)90013-410.1016/0025-5416(67)90013-4 ↗
18. GUEST E. A. · Int. J. Rapid Solidification · 1986 · 2 · 83