journal article·2011-06

Mechanical properties of thermally sprayed Fe based coatings

A Röttger, S Weber, W Theisen, B Rajasekeran, R Vassen

Materials Science and Technology· Volume 27· Issue 6
Publisher page

Abstract

An additional coating against wear or corrosion on component parts is required for many applications. These coatings protect the substrate material against external influences, thus increasing the economic lifetime of the component. Coating processes such as build-up welding and thermal spraying are well established and commonly used. The thermal spray process, in particular, permits deposition of metals, ceramics, or cermets materials to produce near net shape coatings on complex surface geometries. However, commonly used coating materials suffer from high raw material costs, thus decreasing the cost effectiveness of the coating process. Fe based materials are low priced and possess noteworthy mechanical properties; they thus provide the possibility of substituting the expensive Ni and Co based materials commonly used for thermal spray processes. In this work, 2 mm thick high velocity oxyfuel sprayed Fe based coatings in the as sprayed and thermally sprayed and hot isostatic pressed condition were investigated with respect to their mechanical and wear properties. Additionally, the fracture surface was investigated by scanning electron microscopy to characterise the fracture behaviour. It could be demonstrated that the substrate and the heat treatment have the greatest impact on the shear strength of thermally sprayed cold work tool steel. It is shown that the substrate materials as well as the heat treatment are promoting diffusion processes across the interface between the coating and the substrate. Hence, a material integrated bond is formed. The microstructures of the thermally sprayed coatings become more important regarding the mechanisms of failure of the four point bending tests. The material strength is influenced by quenching and tempering and the specimen deflection is influenced by diffusion reactions induced by hot isostatic pressing treatment. The thermally sprayed coatings in the as sprayed condition feature the highest wear resistance due to their hardness.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Mechanical Engineering Institute for Materials, Ruhr-University Bochum, Bochum 44780, Germany

Helmholtz-Zentrum Berlin für Materialien und Energie GmbH, Glienicker Strasse 100, Berlin14109, Germany

Institute of Materials Synthesis and Processing (IEF-1); Institute of Energy Research Research Centre, Juelich 52425, Germany

References (21)

Show source-provided references
1. Theisen W, Winkelmann R, Pelz A, Reichmann B: ‘Auftragsschweißen von Wolframschmelzkarbid in Fe-Basis Legierungen’; 2008, Halle, GSI SLV-Halle.
2. 10.1002/adem.20060025710.1002/adem.200600257 ↗
3. 10.1361/10599639877035096310.1361/105996398770350963 ↗
4. 10.1002/mawe.20060099810.1002/mawe.200600998 ↗
5. 10.1007/BF0264611010.1007/BF02646110 ↗
6. 10.1002/mawe.20050088610.1002/mawe.200500886 ↗
7. 10.1002/mawe.20080038210.1002/mawe.200800382 ↗
8. 10.1002/mawe.20070015610.1002/mawe.200700156 ↗
9. 10.1002/mawe.20070023510.1002/mawe.200700235 ↗
10. Karlsohn M, Röttger A, Silva PA, Weber S, Pyzalla AR, Reimers W, Theisen W: International Symposiom of ‘Friction, wear and wear protection’, Aachen, Germany, April 2008, Vol. 1, 152–158.10.1002/9783527628513.ch17 ↗
11. 10.1002/mawe.20040082910.1002/mawe.200400829 ↗
12. 10.1002/adem.20090019610.1002/adem.200900196 ↗
13. Rajasekaran B · J. Therm. Spray Technol. · 2009 · 19 · 64210.1007/s11666-009-9456-5 ↗
14. 10.1007/s11661-009-0148-z10.1007/s11661-009-0148-z ↗
15. Huth S, Theisen W, Perko J, Schweiger H: ‘Novel corrosion- and wear-resistant PM plastic mould steels containing NbC’, Proc. 8th Int. Tooling Conf., Aachen, Germany, June 2009, RWTH Aachen, 425–435.
16. Röttger A, Weber S, Theisen W, Rajhasekaran B, Vassen R, Mauer G: ‘Thermisches Spritzen von verschleißbeständigen Kaltarbeitsstählen’, Proc. 12th Werkstofftechnischen Kolloquium, Chemnitz, Germany, October 2009, Technische Universität Chemnitz-Institut für Werkstoffwissenschaft und Werkstofftechnik. Werkstoffe und Werkstofftechnische Anwendungen. pp. 68–78, No. 35
17. Hartmann S, Deuerler F, Grützner H: ‘Interpretation der Ergebnisse des Schertests zur Qualitätsprüfung thermisch gespritzter Schichten’, Proc. 9th Werkstofftechnischen Kolloquium, Chemnitz, Germany, 2006, 323–330. Technische Universität Chemnitz-Institut für Werkstoffwissenschaft und Werkstofftechnik. September 2006.
18. Hartmann S, Deuerler F, Grützner H: ‘Qualitätssicherung thermisch gespritzter Schichten mittels Schertest’, Proc. 13th Workshop Plasmatechnik in Ilmenau, Ilmenau, Germany, June 2006, 77–85. Förderkreis Plasma- und Oberflächentechnik -FK POT- Ilmenau; Technische Universität Ilmenau, Interfakultäres Institute für Werkstofftechnik.
19. Deutschman AD, A Michels W, Wilson CE: ‘Machine design theory and practice’, in ‘Machinery's handbook’, 27th edn; 1975, New York, Macmillan Publishing, 31–37.
20. Al-Rubaie KS · Mat. Wiss. Werkst · 1996 · 27 · 31310.1002/mawe.19960270703 ↗
21. 10.1179/174329008X27166410.1179/174329008X271664 ↗