Experimental investigation of structural defects in deep-drawn austenitic Mn-based TWIP steel
Source abstract
Abstract
X-ray diffraction, positron annihilation Doppler broadening spectroscopy and magnetic measurements have been used to investigate the effect of deep drawing on the generation of structural defects in austenitic Mn-based twinning induced plasticity steels. The effects of plastic deformation and hydrogen on structural defects in austenitic Mn-based twinning induced plasticity steels have not extensively been investigated, leaving the understanding of the effect of the deformation mechanisms involving twinning or plasticity induced transformation on the structural defects incomplete. X-ray diffraction measurements show an initial increase in defect concentration with increasing equivalent strain. Positron annihilation Doppler broadening revealed the existence of two defect types with a different degree of open volume. The interpretation in terms of dislocations, stacking faults and/or twins corroborated with the line broadening results from X-ray diffraction measurements. Magnetisation measurements revealed the formation of α′ martensite, which was related to the fraction of positrons annihilating at smaller structural defects. The presented findings attribute the larger defect type to dislocations, whereas the smaller defect type is attributed to partial dislocations and is consequently related to twinning or plasticity induced transformation.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Tata Steel Research Development and Technology, Wenckebachstraat 1, Ijmuiden 1970 CA, The Netherlands
Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology, Mekelweg 2, Delft 2628 CD, The Netherlands
Materials Innovation Institute (M2i), Mekelweg 2, Delft 2628 CD, The Netherlands
Faculty of Applied Sciences, Delft University of Technology, Mekelweg 15, Delft 2629 JB, The Netherlands
References (19)
Show source-provided references
1. Cornette D, Cugy P, Hildenbrand A, Bouzekri M, Lovato G: Proc. Society for Automotive Engineers Conf., Detroit, MI, USA, April2005, SAE, Paper 2005-01-1327.
2. Scott C · Mater. Sci. Technol · 2005 · 127
3. 10.1016/j.msea.2006.02.18910.1016/j.msea.2006.02.189 ↗
4. 10.1016/1359-6462(95)00580-310.1016/1359-6462(95)00580-3 ↗
5. 10.1179/02670830422501968710.1179/026708304225019687 ↗
6. 10.1016/0168-583X(85)90529-410.1016/0168-583X(85)90529-4 ↗
7. 10.1016/S1359-6454(97)00349-210.1016/S1359-6454(97)00349-2 ↗
8. 10.6028/jres.109.00510.6028/jres.109.005 ↗
9. 10.1016/S0022-3115(00)00345-710.1016/S0022-3115(00)00345-7 ↗
10. 10.1016/j.scriptamat.2006.08.03010.1016/j.scriptamat.2006.08.030 ↗
11. 10.1016/j.ijplas.2005.04.00910.1016/j.ijplas.2005.04.009 ↗
12. Schut H: ‘A variable energy positron beam facility with applications in materials science’, PhD thesis, Delft University of Technology, Delft, The Netherlands, 1990.
13. Krause-Rehberg R, Leipner HS: ‘Positron annihilation in semiconductors – defect studies’; 1997, New York, Springer.
14. 10.1016/0036-9748(84)90493-910.1016/0036-9748(84)90493-9 ↗
15. 10.1016/j.nimb.2007.02.07310.1016/j.nimb.2007.02.073 ↗
16. 10.1016/0921-5093(94)90975-X10.1016/0921-5093(94)90975-X ↗
17. 10.1016/0079-6425(94)00007-710.1016/0079-6425(94)00007-7 ↗
18. 10.1016/j.scriptamat.2007.05.00310.1016/j.scriptamat.2007.05.003 ↗
19. Bracke L: ‘Deformation behaviour of austenitic Fe–Mn alloys by twinning and martensitic transformation’, PhD thesis, University of Ghent, Ghent, Belgium, 2007.