Fracture toughness of steels with nickel content in respect of carbide morphology
Source abstract
Abstract
This paper is focused on the influence of Ni addition on the microstructure and fracture toughness of structural steels after tempering. Nickel is known to increase the resistance to cleavage fracture of steel and decrease a ductile–brittle transition temperature. The medium carbon, low alloy martensitic steels attain the best combination of properties in low tempered condition, with tempered martensite, retained austenite and transition carbides in the microstructure. In the present research, four model alloys of different Ni contents (from 0·35 to 4·00) were used. All samples were in as quenched and tempered condition. Quenching was performed in oil at room temperature. After quenching, samples were tempered at 200°C for 2 h. An increase in nickel content in the investigated model structural steels causes a decrease in ε carbide volume fraction in their microstructure. Cementite nucleates independently in the boundaries of martensite laths and in the twin boundaries in the areas where the ε carbide has been dissolved. It was stated that stress intensity factor KIc significantly decreases in the case of the presence of dispersive elongated cementite precipitations at the boundaries of the prior austenite grains.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, A. Mickiewicza Av. 30, Krakow 30-059, Poland
References (30)
Show source-provided references
1. 10.1016/S1359-6454(02)00313-010.1016/S1359-6454(02)00313-0 ↗
2. 10.1016/S1359-6462(03)00239-210.1016/S1359-6462(03)00239-2 ↗
3. 10.1016/0308-0161(95)00057-710.1016/0308-0161(95)00057-7 ↗
4. 10.1179/msc.1978.12.11.51110.1179/msc.1978.12.11.511 ↗
5. 10.1016/0001-6160(86)90026-X10.1016/0001-6160(86)90026-X ↗
6. 10.1016/j.actamat.2007.03.02810.1016/j.actamat.2007.03.028 ↗
7. 10.1016/j.mechmat.2008.03.00610.1016/j.mechmat.2008.03.006 ↗
8. 10.1016/j.jmps.2004.05.00810.1016/j.jmps.2004.05.008 ↗
9. 10.1016/j.msea.2013.08.06310.1016/j.msea.2013.08.063 ↗
10. 10.1111/j.1365-2818.2009.03275.x10.1111/j.1365-2818.2009.03275.x ↗
11. Krawczyk J. · JAMME · 2007 · 21 · 59
12. 10.1016/j.jmatprotec.2005.02.03910.1016/j.jmatprotec.2005.02.039 ↗
13. Zaja˛c G., and Pacyna J. ‘The effect of nickel on mechanical properties of structural steels model alloys’, in ‘Proc. Conf. on ‘Contemporary achievements in mechanics, manufacturing and materials science’, Gliwice–Zakopane, Poland, December 2005’, 1061–1065, International Organising Committee of the Scientific Conferences AMME World Press.
14. 10.1179/03063457979043432110.1179/030634579790434321 ↗
15. 10.1179/175355507X21415910.1179/175355507X214159 ↗
16. 10.1179/174329306X7783010.1179/174329306X77830 ↗
17. 10.1179/1743284711Y.000000010010.1179/1743284711Y.0000000100 ↗
18. 10.1179/mst.1997.13.7.56810.1179/mst.1997.13.7.568 ↗
19. 10.1007/BF0264398610.1007/BF02643986 ↗
20. 10.1016/j.ijpvp.2012.08.00610.1016/j.ijpvp.2012.08.006 ↗
21. 10.1016/j.ijpvp.2012.06.00310.1016/j.ijpvp.2012.06.003 ↗
22. 10.1016/S0013-7944(97)00058-110.1016/S0013-7944(97)00058-1 ↗
23. 10.1016/j.mechmat.2003.11.00510.1016/j.mechmat.2003.11.005 ↗
24. 10.1016/S0020-7683(98)00151-610.1016/S0020-7683(98)00151-6 ↗
25. Karp J. · Metallurgist · 1979 · 6 · 253
26. Zaja˛c G. · Metallurgist · 2004 · 7 · 443
27. 10.4149/km_2011_2_12510.4149/km_2011_2_125 ↗
28. 10.12693/APhysPolA.114.164110.12693/APhysPolA.114.1641 ↗
29. 10.12693/APhysPolA.114.165110.12693/APhysPolA.114.1651 ↗
30. Bała P. · Arch. Metall. Mater · 2007 · 52 · 113