journal article·2001-06

Modelling of isothermal formation of pearlite and subsequent reaustenitisation in eutectoid steel during continuous heating

F.G. Caballero, C. Capdevila, C. García de Andrés

Materials Science and Technology· Volume 17· Issue 6
Publisher page

Abstract

Three different morphologies of pearlite have been formed isothermally at three different temperatures in a eutectoid steel. Moreover, the interlamellar spacing of the pearlite was calculated using the Zener and Hillert theoretical method. Experimental results suggest that the growth of pearlite is mainly controlled by volume diffusion of carbon in austenite, in the temperature range studied in this steel. In addition, a model that describes pearlite to austenite transformation during continuous heating in a eutectoid steel has been developed. The influence of structural parameters, such as interlamellar spacing and edge length of pearlite colonies, on the transformation kinetics has been experimentally studied and considered in the modeling. It has been found that the kinetics of pearlite to austenite transformation are slower the coarser the initial pearlite microstructure. Experimental validation of this model has been carried out and a good agreement (an accuracy level of higher than 90% in square correlation factor) between the experimental and calculated values has been found.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Department of Physical Metallurgy Centro Nacional de Investigaciones Metalúrgicas (CENIM), Consejo Superior de Investigaciones Cientificas, (CSIC), Avda. Gregorio del Amo 8 , 28040 Madrid, Spain

The Department of Materials Science and Metallurgy University of Cambridge, Pembroke Street, Cambridge CB2 3QZ , UK

References (28)

Show source-provided references
1. 10.1007/BF0264469410.1007/BF02644694 ↗
2. MEHL R. F. · Trans. AIME · 1933 · 105 · 215
3. ZENER C. · Trans. AIME · 1946 · 167 · 550
4. HILLERT M. · Jernkontorets. Ann · 1957 · 141 · 757
5. M. HILLERT: ‘The mechanism of phase transformation in crystalline solids’, 231; 1969, London, Institute of Metals.
6. HASHIGUCHI K. · Scand. J. Metall · 1984 · 13 · 240
7. 10.1007/BF0264855110.1007/BF02648551 ↗
8. 10.1007/BF0264368610.1007/BF02643686 ↗
9. 10.1007/BF0264442110.1007/BF02644421 ↗
10. 10.1007/BF0281422810.1007/BF02814228 ↗
11. ANDRÈS C. GARCIA DE · Ser. Mater · 1998 · 38 · 1835
12. SPEICH G. R. · Trans. TMS— AIME · 1969 · 245 · 1063
13. 10.1016/0001-6160(83)90039-110.1016/0001-6160(83)90039-1 ↗
14. JUDD R. R. · Trans. TMS— AIME · 1968 · 242 · 206
15. HILLERT M. · J. Iron Steel MA · 1971 · 209 · 49
16. 10.1007/BF0264854110.1007/BF02648541 ↗
17. 10.1016/0036-9748(84)90350-810.1016/0036-9748(84)90350-8 ↗
18. DIRNFELD S. F. · Trans · 1974 · 5 · 1437
19. E. E. UNDERWOOD: ‘Quantitative stereology’, 73–75; 1970, Reading, Addison Wesley.
20. R. T. DE HOFF and F. H. RHINES: ‘Quantitative stereology’, 93; 1968, New York, McGraw Hill.
21. PERA F. S. LE · J. Met · 1980 · 32 · 38
22. 10.1007/BF0265284410.1007/BF02652844 ↗
23. 10.1016/0001-6160(58)90051-810.1016/0001-6160(58)90051-8 ↗
24. 10.1063/1.175063110.1063/1.1750631 ↗
25. ROBERTS G. A. · Trans. ASM · 1943 · 31 · 613
26. 10.1007/BF0265805010.1007/BF02658050 ↗
27. ANDRÉS C. GARCIA DE · Ser. Mater · 1998 · 39 · 791
28. ANDREWS K. W. · J. Iron Steel Inst · 1965 · 203 · 721