A comparative study on friction stir welding of tailor weld blanks
Source abstract
Abstract
The effect of single-pass (SP) and double-pass (DP) friction stir welding (FSW) on metallographic and mechanical properties of joints was investigated in this study. Uniform temperature distribution across the weld cross-section was obtained during double-pass FSW (DP-FSW). SEM and EDS analyses showed an increase in the fraction of second phase particles (SPPs) and the formation of new SPPs by DP-FSW. An increase in hardness values by 13.3% and a severe decrease in joint efficiency by 46.7% were observed by DP-FSW. Fractography examination of fractured surfaces of welded specimens showed a quasi-cleavage and ductile mode of failure in SP and DP joints, respectively. The potentiodynamic polarisation test of base metal and welded specimens indicated the high corrosion resistance of welded specimens.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Metallurgical and Materials Engineering, National Institute of Technology, Srinagar, Srinagar, India
Department of Mechanical Engineering, Jamia Millia Islamia, New Delhi, India
Department of Materials Science and Engineering, India Institute of Technology, New Delhi, India
References (38)
Show source-provided references
1. Majeed T, Mehta Y, Siddiquee AN. Challenges in joining of unequal thickness materials for aerospace applications: a review. Proc Inst Mech Eng, Part L J Mater Design Appl. 2021; 235(4):934–945.
2. 10.1179/1743284713Y.000000028010.1179/1743284713Y.0000000280 ↗
3. 10.1080/10426914.2018.154471710.1080/10426914.2018.1544717 ↗
4. 10.1016/j.tafmec.2013.05.00210.1016/j.tafmec.2013.05.002 ↗
5. 10.1007/s12289-010-0903-010.1007/s12289-010-0903-0 ↗
6. 10.1007/BF0326647610.1007/BF03266476 ↗
7. 10.1179/174329307X17369810.1179/174329307X173698 ↗
8. 10.1016/j.tafmec.2013.05.00210.1016/j.tafmec.2013.05.002 ↗
9. 10.1016/j.msea.2009.01.04110.1016/j.msea.2009.01.041 ↗
10. Rohilla P, Kumar N. Experimental investigation of tool geometry on mechanical properties of friction stir welding of AA6061. Int J Innov Technol Explor Eng. 2013; 3(3):56–61.
11. 10.15282/jmes.7.2014.4.010210.15282/jmes.7.2014.4.0102 ↗
12. Mehra S, Dhanda P, Khanna R Effect of tool on tensile strength in single and double sided friction stir welding. Int J Sci Eng Res. 2012; 3(11):1–6.
13. 10.1179/1362171813Y.000000014710.1179/1362171813Y.0000000147 ↗
14. 10.1016/j.msea.2018.07.05710.1016/j.msea.2018.07.057 ↗
15. 10.1016/j.engfracmech.2020.10688710.1016/j.engfracmech.2020.106887 ↗
16. 10.1016/j.jmapro.2019.01.01010.1016/j.jmapro.2019.01.010 ↗
17. 10.1016/j.jestch.2020.11.00110.1016/j.jestch.2020.11.001 ↗
18. 10.1016/j.jmatprotec.2017.01.00910.1016/j.jmatprotec.2017.01.009 ↗
19. 10.1016/j.compstruc.2007.04.00710.1016/j.compstruc.2007.04.007 ↗
20. 10.1016/j.msea.2012.01.01610.1016/j.msea.2012.01.016 ↗
21. 10.1016/j.jmatprotec.2019.11636610.1016/j.jmatprotec.2019.116366 ↗
22. 10.1016/j.msea.2008.04.04210.1016/j.msea.2008.04.042 ↗
23. 10.1007/s11665-018-3188-y10.1007/s11665-018-3188-y ↗
24. 10.1007/s11661-999-0251-110.1007/s11661-999-0251-1 ↗
25. 10.1007/s11661-011-0822-910.1007/s11661-011-0822-9 ↗
26. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
27. 10.1016/j.matchar.2018.04.01510.1016/j.matchar.2018.04.015 ↗
28. 10.1115/1.405229510.1115/1.4052295 ↗
29. 10.1016/S1003-6326(11)61318-610.1016/S1003-6326(11)61318-6 ↗
30. Sahu PK Pal S. Fatigue life behaviour of single and double pass friction stir welded different thickness AA1050 joint). 6th international & 27th All India Manufacturing technology design and research conference (AIMTDR–2016) college of engineering. Pune Maharashtra India; 2018 p. 1141–1145 ISBN: 978-93-86256-27-0. DOI:10.13140/RG.2.2.26496.5376810.13140/RG.2.2.26496.53768 ↗
31. 10.1016/S0924-0136(03)00806-910.1016/S0924-0136(03)00806-9 ↗
32. 10.1016/j.msea.2019.05.06710.1016/j.msea.2019.05.067 ↗
33. Gavras AG, Chenelle BF, Lados DA. Effects of microstructure on the fatigue crack growth behavior of light metals and design considerations. Rev Matér. 2010; 15:319–329.
34. 10.1016/j.jmatprotec.2010.10.00510.1016/j.jmatprotec.2010.10.005 ↗
35. Lienert TJ, Stellwag WLJr, Grimmett BB Friction stir welding studies on mild steel. Weld J-New York. 2003; 82(1):1–8.
36. 10.1177/0954406221100360910.1177/09544062211003609 ↗
37. 10.1016/j.corsci.2013.04.00110.1016/j.corsci.2013.04.001 ↗
38. 10.1016/j.electacta.2010.09.02310.1016/j.electacta.2010.09.023 ↗