The influence of grain size and precipitation and a boron addition on the hot ductility of a high Al, V containing TWIP steels
Source abstract
Abstract
The hot ductility of V containing high Al, TWIP steels was determined at a 1000°C, when no dynamic recrystallisation occurred, and precipitation was too coarse to influence ductility. A change in grain size from ∼1250 to 500 µm caused the reduction of the area to increase by ∼25%, intimating that the improvement in ductility on adding boron is due to its segregation to the boundaries causing grain refinement on solidification. Fine VC precipitation was mainly responsible for deteriorating ductility. In these steels, the ductility of un-recrystallised austenite decreases gradually with increasing temperature from 700°C to 1000°C and this in combination with fine precipitation can markedly change the shape of the hot ductility curve from ductility decreasing to increasing with temperature.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering and Aeronautics, City, University of London, London, UK
POSCO, Pohang, South Korea
References (19)
Show source-provided references
1. 10.1080/02670836.2021.188204710.1080/02670836.2021.1882047 ↗
2. 10.1179/imr.1991.36.1.18710.1179/imr.1991.36.1.187 ↗
3. 10.1179/mst.1996.12.2.13210.1179/mst.1996.12.2.132 ↗
4. 10.1179/174367507X24735910.1179/174367507X247359 ↗
5. 10.1179/095066009X1257253017062410.1179/095066009X12572530170624 ↗
6. Kang SE · Mater Sci Technol · 2020 · 37 · 1
7. 10.1016/j.msea.2014.05.07210.1016/j.msea.2014.05.072 ↗
8. 10.1016/j.msea.2015.09.07910.1016/j.msea.2015.09.079 ↗
9. 10.1016/j.msea.2014.08.03010.1016/j.msea.2014.08.030 ↗
10. Lagerquist M · Proc Soviet-Swedish Symp on Clean Steel Sandviken Sweden · 1971 · 1971 · 38
11. 10.1179/imr.1988.33.1.22110.1179/imr.1988.33.1.221 ↗
12. Tanino M. · Nippon Steel Technical Report · 1983 · 331
13. ASTM Int. Designation.E112-96 (Reapproved 2006). Standard Test Methods for Determining average grain size.
14. 10.2355/isijinternational.39.83310.2355/isijinternational.39.833 ↗
15. 10.1179/03071697980327647110.1179/030716979803276471 ↗
16. 10.1179/1743284711Y.000000010910.1179/1743284711Y.0000000109 ↗
17. 10.1179/mst.1986.2.11.109910.1179/mst.1986.2.11.1099 ↗
18. 10.1179/026708309X1250693387338710.1179/026708309X12506933873387 ↗
19. 10.3390/met1009123010.3390/met10091230 ↗