journal article·2020-08

Simulation and characterisation of the microstructure of ultra-fast heated dual-phase steel

A. Banis, M. Bouzouni, R. H. Petrov, S. Papaefthymiou

Materials Science and Technology· Volume 36· Issue 12
Publisher page

Abstract

The current study focuses on the composition of the constituents that are obtained from ultra-fast heating and the composition of the parent austenite that was achieved at the peak temperature. In order to analyse the content and distribution of important elements such as carbon, manganese, chromium and molybdenum in the microstructure, simulation software was used. It is also found that the content of these elements shows a gradient in the microstructure in relation to the distance from the undissolved cementite. This leads to carbon-rich areas in the vicinity of cementite and carbon-depleted areas as the distance from the cementite grows. The former creates ideal conditions for the retainment of austenite due to the higher carbon content while the latter creates conditions that enable the formation of bainite in the microstructure.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Physical Metallurgy, Division of Metallurgy and Materials, School of Mining & Metallurgical Engineering, National Technical University of Athens, Athens, Greece

Department of Physical Metallurgy and Forming, Hellenic Research Centre for Metals S.A.—ELKEME S.A., Viotia, Greece

Department of Electromechanical, Systems, & Metal Engineering, Ghent University, Ghent, Belgium

Department of Materials Science and Engineering, Delft University of Technology, Delft, The Netherlands

References (25)

Show source-provided references
1. Cola G. Properties of bainite nucleated by water quenching in 80 ms. In Proceedings of the 1st International Symposium on Steel Science Kyoto Japan 16–19 May 2007;Furuhara T. Tsuzaki K. Eds.; Iron and Steel Institute of Japan: Tokyo Japan 2007; pp. 187–190.
2. 10.1179/174328409X43381310.1179/174328409X433813 ↗
3. 10.3390/met903031210.3390/met9030312 ↗
4. Banis A, Papaefthymiou S. Microstructure characterization of an ultra-fast heated medium carbon chromium-manganese high Strength steel. Int. J. Met. Met. Phys. 2018; 3:877.
5. 10.3390/met808064610.3390/met8080646 ↗
6. 10.24218/jnat.2017.2210.24218/jnat.2017.22 ↗
7. 10.35840/2631-5076/920510.35840/2631-5076/9205 ↗
8. 10.1016/j.msea.2018.12.03610.1016/j.msea.2018.12.036 ↗
9. Kaluba W, Taillard R, Foct J. The bainitic mechanism of austenite formation during rapid heating. ActaMater. 1998; 46:5917–5927.
10. 10.1016/S1359-6462(99)00389-910.1016/S1359-6462(99)00389-9 ↗
11. 10.1016/S1359-6462(99)00388-710.1016/S1359-6462(99)00388-7 ↗
12. SavranVI. Austenite Formation in C-Mn Steel. Ph.D. Thesis TU Delft Delft The Netherlands 2009.
13. Castro Cerda FM. Third Generation Advanced High Strength Steels via Ultrafast Heating. Ph.D. Thesis Ghent University Ghent Belgium 2017.
14. 10.3390/met611028810.3390/met6110288 ↗
15. Cerda FMC, Kestens LAI, Petrov RH. “Flash” annealing in a cold-rolled Low carbon steel Alloyed with Cr, Mn, Mo, and Nb: Part II- Anisothermal recrystallization and transformation Textures. Steel Res. Int. 2018; 90:1–13.
16. 10.1016/j.msea.2016.06.05610.1016/j.msea.2016.06.056 ↗
17. 10.1007/s11661-018-4658-410.1007/s11661-018-4658-4 ↗
18. 10.1016/j.msea.2014.12.11810.1016/j.msea.2014.12.118 ↗
19. 10.1533/9780857096104.4.58110.1533/9780857096104.4.581 ↗
20. 10.1051/epjconf/20181830301710.1051/epjconf/201818303017 ↗
21. 10.3390/met908087710.3390/met9080877 ↗
22. SavranVI. Austenite Formation in C-Mn Steel. Ph.D. Thesis TU Delft Delft The Netherlands 2009.
23. 10.1016/0001-6160(64)90220-210.1016/0001-6160(64)90220-2 ↗
24. Kirkaldy JS Venugopolan D. Phase Transformations in Ferrous Alloys; Marder A.R. Goldstein J.I. Eds.; AIME:Warrendale PA USA 1984; p. 125.
25. 10.1179/03063458179042671410.1179/030634581790426714 ↗