Effects of annealing temperature on nano/ultrafine-grained structure in austenite stainless steel
Source abstract
Abstract
A nano/ultrafine-grained (NG/UFG) structure was obtained by heavy cold deformation (80%) and annealing in the range between 700 and 950°C for 60 s to explore the effects of temperature on the development of NG/UFG structures in austenitic stainless steel. Results showed that martensite was reversibly transformed to austenite, with the accumulation of twins, dislocations and subgrain boundaries. At 700°C, the microstructure exhibited low elongation and consisted of 65% austenite. Above 750°C, the amount of reversed austenite was nearly 100%. The tensile strength of the sample decreased slightly, whereas the elongation increased further, showing co-dependent strengthening and toughening. At 850°C, micrometre-sized grains were embedded in the nanocrystalline/ultrafine grains. In this case, both the microstructure and mechanical properties were optimal.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Engineering Technology, University of Science and Technology Beijing, Beijing, China
Collaborative Innovation Center of Steel Technology, University of Science and Technology Beijing, Beijing, China
Funding
National Natural Science Foundation of China
References (25)
Show source-provided references
1. 10.2355/isijinternational.43.13510.2355/isijinternational.43.135 ↗
2. 10.1016/S1359-6462(03)00396-810.1016/S1359-6462(03)00396-8 ↗
3. 10.1016/S1359-6462(03)00394-410.1016/S1359-6462(03)00394-4 ↗
4. 10.1081/AMP-12002749810.1081/AMP-120027498 ↗
5. 10.1007/s11661-014-2543-310.1007/s11661-014-2543-3 ↗
6. 10.1002/srin.20080614710.1002/srin.200806147 ↗
7. 10.1002/srin.20070627410.1002/srin.200706274 ↗
8. 10.1002/srin.20080614610.1002/srin.200806146 ↗
9. 10.1016/j.msea.2006.08.09510.1016/j.msea.2006.08.095 ↗
10. 10.1016/j.matlet.2009.03.04310.1016/j.matlet.2009.03.043 ↗
11. 10.1007/s11661-008-9723-y10.1007/s11661-008-9723-y ↗
12. 10.1007/s11661-009-9920-310.1007/s11661-009-9920-3 ↗
13. 10.1016/j.jmatprotec.2010.02.01010.1016/j.jmatprotec.2010.02.010 ↗
14. 10.1016/j.msea.2010.08.00210.1016/j.msea.2010.08.002 ↗
15. Momeni A · J Mater Process Technol · 2011 · 27 · 338
16. 10.1016/j.matlet.2012.08.05810.1016/j.matlet.2012.08.058 ↗
17. 10.1016/j.matdes.2012.09.05410.1016/j.matdes.2012.09.054 ↗
18. 10.1080/02670836.2016.122909210.1080/02670836.2016.1229092 ↗
19. 10.1179/1743284712Y.000000017310.1179/1743284712Y.0000000173 ↗
20. 10.1016/j.msea.2013.10.08710.1016/j.msea.2013.10.087 ↗
21. 10.2355/isijinternational.31.72110.2355/isijinternational.31.721 ↗
22. 10.2355/isijinternational.31.143110.2355/isijinternational.31.1431 ↗
23. 10.2355/isijinternational.34.52210.2355/isijinternational.34.522 ↗
24. 10.1016/j.actbio.2010.01.03410.1016/j.actbio.2010.01.034 ↗
25. 10.1016/j.msea.2014.06.06510.1016/j.msea.2014.06.065 ↗