journal article·2013-05

Thermal stability of retained austenite in Cr–Ni weld metals at low temperatures

H Qiu, J G Qi, L N Wang, F X Yin, K Hiraoka

Materials Science and Technology· Volume 29· Issue 5
Publisher page

Abstract

As environmental temperature decreases, the amount of retained austenite is more likely to greatly reduce due to the thermal austenite–martensite transformation caused by the decreased thermal stability of retained austenite, probably making its amount lower than the required content. In the present study, the thermal stability of retained austenite in Cr–Ni weld metals was investigated to see whether sufficient retained austenite can be maintained at low temperatures. The specific experimental procedure is as follows: briefly, the samples were cooled in turn from room temperature to 0, −20, −40, −60, −80, −100 and −196°C; the amount of retained austenite at the above temperatures was measured using X-ray diffraction. Through investigating the dependence of the content of retained austenite on temperature, it was revealed that when the content of retained austenite is <20, retained austenite can be maintained until −196°C.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research Center for Strategic Materials, National Institute for Materials Science, 1-2-1 Sengen, Tsukuba, Ibaraki 305-0047, Japan

Liaoning University of Technology, China

Tianjin Pipe Group Corporation, Tianjin, China

China First Heavy Industries, Tianjin, China

Joining and Welding Research Institute, Osaka University, Osaka, Japan

References (7)

Show source-provided references
1. Hiraoka K: ‘Activities of welding sub-group in NEDO project’. Preprints of the National Meeting of Japan Welding Society, Japan Welding Society, 2012, 18.
2. Shibayanagi T, Shimada Y, Takahashi M, Ikeuchi K: ‘Austenitic phase and hydrogen embrittlement in weld metal newly designed for high strength steels’. Preprints of the National Meeting of Japan Welding Society, Japan Welding Society, 2012, 24.
3. Qiu H · Q. J. JWS · 2012 · 30 · 171
4. Qiu H, Wang LN, Nakamura T, Hiraoka K: ‘The effect of retained austenite on the fracture toughness of multi-pass weld metal’, Preprints of the National Meeting of Japan Welding Society, Japan Welding Society, 2012, 28.
5. 10.2355/isijinternational.42.156510.2355/isijinternational.42.1565 ↗
6. 10.1016/j.actamat.2005.08.01710.1016/j.actamat.2005.08.017 ↗
7. 10.2355/isijinternational.49.14610.2355/isijinternational.49.146 ↗