journal article·2011-06

Effect of heat treatment on mechanical properties of alloy 909

O Covarrubias, O Elizarrarás, R Colás

Materials Science and Technology· Volume 27· Issue 6
Publisher page

Abstract

Alloy 909 is a Ni–Fe–Co alloy that exhibits a low coefficient of thermal expansion and high strength at elevated temperatures. These characteristics are suitable for demanding high temperature uses such as turbine components for aerospace and energy generation. The mechanical properties are achieved by heat treatment (solution and aging) that affects the microstructural characteristics such as grain size and precipitation of intergranular and transgranular particles. This work summarises the results of trials conducted to determine the conditions that assure the desired mechanical properties in high temperature ring rolled pieces. Results of tensile, hardness and stress rupture tests are complemented by microstructural analyses. These studies allowed for establishing a robust method for the manufacture of rings; no degradation of the product, either metallurgical or due to properties, has been reported after the method was implemented.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Frisa Aerospace SA de CV , Santa Catarina, Mexico

Facultad de Ingeniería Mecánica y Eléctrica, Universidad Autónoma de Nuevo León, San Nicolás de los Garza, Mexico

References (13)

Show source-provided references
1. ‘Pyromet Alloy CTX-909 data sheet’, Carpenter Technology Corporation, Huntington, WV, USA, available at: http://www.cartech.com
2. ‘Incoloy Alloy 909 data sheet’, Special Metals Corporation, Huntington, WV, USA, available at: http://www.specialmetals.com
3. Heck KA, Smith DF, Smith JS, Wells DA, Holderby MA: ‘The physical metallurgy of a silicon-containing low expansion superalloy’, Proc. Conf. Superalloys ’88, London, UK, 1988, The Metallurgical Society, 151–160.10.7449/1988/Superalloys_1988_151_160 ↗
4. 10.2355/isijinternational.37.8010.2355/isijinternational.37.80 ↗
5. 10.1002/srin.20050598110.1002/srin.200505981 ↗
6. 10.1002/srin.20050604410.1002/srin.200506044 ↗
7. ‘Standard test methods for determining average grain size’, E112-96, ASTM International, West Conshohocken, PA, USA, 2004
8. ‘Standard test methods for conducting time-for-rupture notch tension test of materials’, E292-09, ASTM International, West Conshohocken, PA, USA, 2009
9. Cahn RW: in ‘Recovery and recrystallization: physical metallurgy’, (ed. , Cahn R W, Haasen P), 4th edn, 2399–2500; 1976, Amsterdam, Elsevier.10.1016/B978-044489875-3/50033-8 ↗
10. 10.1007/BF0264357110.1007/BF02643571 ↗
11. 10.1016/0956-716X(93)90265-T10.1016/0956-716X(93)90265-T ↗
12. 10.1179/02670830422501034310.1179/026708304225010343 ↗
13. de la Garza M · Rev. Mex. Fis. · 2009 · 55 · 6