journal article·2013-08Open access

Role of Al additions in wear control of nanocrystalline Mo(Si1−xAlx)2 coatings prepared by double cathode glow discharge technique

J Xu, H S Fan, Z Y Li

Materials Science and Technology· Volume 29· Issue 8

Abstract

Four kinds of nanocrystalline Mo(Si1−xAlx)2 coatings with differing Al contents are prepared onto a Ti–6Al–4V substrates by a double cathode glow discharge apparatus. The microstructural features of the deposited coatings were characterised by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. These coatings are composed of the equiaxed C40–MoSi2 grains with the average grain size of ∼5 nm. Nano-indentation measurements indicated that the hardness H, elastic modulus E and the H/ E or H3/ E2 ratio of the nanocrystalline Mo(Si1−xAlx)2 coatings slightly increase with the increase in Al content. The tribological behaviour of the nanocrystalline Mo(Si1−xAlx)2 coating sliding against a ZrO2 ceramic ball at room temperature has been compared using a ball-on-disc type tribometer under unlubricated conditions. Experimental results showed that the specific wear rates of the nanocrystalline Mo(Si1−xAlx)2 coatings decrease with increasing Al content and are dramatically reduced by more than 1–2 orders of magnitude over the uncoated Ti–6A1–4V. The enhancement of wear resistance of the nanocrystalline Mo(Si1−xAlx)2 coatings by Al additions is correlated with the increased mechanical properties and the forming oxide layer by tribochemical reactions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Material Science and Engineering, Nanjing University of Aeronautics and Astronautics, 29 Yudao Street, Nanjing 210016, China

Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China

References (29)

Show source-provided references
1. 10.1016/j.triboint.2008.08.00510.1016/j.triboint.2008.08.005 ↗
2. 10.1016/j.wear.2010.11.02110.1016/j.wear.2010.11.021 ↗
3. 10.1016/S1359-6454(00)00326-810.1016/S1359-6454(00)00326-8 ↗
4. 10.1016/0257-8972(95)08316-210.1016/0257-8972(95)08316-2 ↗
5. 10.1016/S0257-8972(03)00137-310.1016/S0257-8972(03)00137-3 ↗
6. 10.1016/S1359-6454(03)00465-810.1016/S1359-6454(03)00465-8 ↗
7. 10.1016/0956-716X(95)91593-E10.1016/0956-716X(95)91593-E ↗
8. 10.1016/S1359-6462(99)00403-010.1016/S1359-6462(99)00403-0 ↗
9. 10.1016/j.wear.2009.01.02210.1016/j.wear.2009.01.022 ↗
10. 10.1016/0956-7151(91)90154-S10.1016/0956-7151(91)90154-S ↗
11. 10.1111/j.1151-2916.1996.tb08966.x10.1111/j.1151-2916.1996.tb08966.x ↗
12. 10.1016/S0966-9795(00)00049-210.1016/S0966-9795(00)00049-2 ↗
13. 10.1088/0965-0393/6/4/01310.1088/0965-0393/6/4/013 ↗
14. 10.1016/S0921-5093(98)01060-010.1016/S0921-5093(98)01060-0 ↗
15. 10.1016/0921-5093(92)90311-N10.1016/0921-5093(92)90311-N ↗
16. 10.1016/j.intermet.2006.03.01310.1016/j.intermet.2006.03.013 ↗
17. 10.1088/0022-3727/42/10/10541310.1088/0022-3727/42/10/105413 ↗
18. 10.1016/j.scriptamat.2007.06.01710.1016/j.scriptamat.2007.06.017 ↗
19. 10.1557/JMR.1992.156410.1557/JMR.1992.1564 ↗
20. 10.1016/S0921-5093(97)00747-810.1016/S0921-5093(97)00747-8 ↗
21. 10.1007/BF0036076310.1007/BF00360763 ↗
22. 10.1039/B9NR00225A10.1039/B9NR00225A ↗
23. Leyland A · Surf. Coat. Technol. · 2004 · 317 · 177
24. 10.1016/j.actbio.2009.10.03710.1016/j.actbio.2009.10.037 ↗
25. 10.1016/j.msea.2007.07.09910.1016/j.msea.2007.07.099 ↗
26. 10.1016/j.surfcoat.2007.07.07610.1016/j.surfcoat.2007.07.076 ↗
27. 10.1016/j.surfcoat.2005.06.02110.1016/j.surfcoat.2005.06.021 ↗
28. 10.1080/0141861980822375910.1080/01418619808223759 ↗
29. 10.1016/S0966-9795(97)00103-910.1016/S0966-9795(97)00103-9 ↗