journal article·2009-10

Understanding the effect of aluminium on microstructure in low level nitrogen steels

Y. Palizdar, A. J. Scott, R. C. Cochrane, R. Brydson

Materials Science and Technology· Volume 25· Issue 10
Publisher page

Abstract

The influence of aluminium on steel microstructure has been examined in low nitrogen steels. There is a lack of knowledge in the literature about the effect of aluminium on steel microstructure at levels greater than 0·1 wt-%. This has not been important as aluminium additions are typically low, with the aluminium being added as a deoxidant and grain refining element. However, recently aluminium has been added at significantly higher levels (0·5–2 wt-%) in new types of transformation induced plasticity (TRIP) steels to delay the bainitic transformation and give a dual phase microstructure. Furthermore, recent studies have shown that aluminium can be considered as a solid solution strengthener in low nitrogen steels. To investigate the effect of aluminium on steel microstructure, steels of differing aluminium composition between 0·02 and 0·98 wt-% have been prepared and investigated by metallography and EBSD. The results show that aluminium has a significant effect on ferrite grain size and ferrite grain size distribution.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute for Materials ResearchUniversity of Leeds, Leeds LS2 9JT, UK

References (17)

Show source-provided references
1. 10.1179/174328407X24846010.1179/174328407X248460 ↗
2. 10.1007/BF0264559610.1007/BF02645596 ↗
3. Mabuchi H., and Nakao H.: ISIJ Int. 1981,7, 495–501.10.2355/isijinternational1966.21.495 ↗
4. Mabuchi H., and Nakao H.: ISIJ Int. 1983, 6, 504–512.10.2355/isijinternational1966.23.504 ↗
5. 10.1016/S0304-8853(00)00005-610.1016/S0304-8853(00)00005-6 ↗
6. 10.1007/s11661-006-1067-x10.1007/s11661-006-1067-x ↗
7. 10.1179/cmq.1982.21.3.29910.1179/cmq.1982.21.3.299 ↗
8. 10.1179/174328007X16025410.1179/174328007X160254 ↗
9. Piazolo S., Sursaeva V. G., and Prior D. J.: Proc. 14th Int. Conf. on ‘Textures of materials’, Leuven, Belgium, July 2005, Trans Tech Publications,11–15.
10. Gladman T. ‘The physical metallurgy of microalloyed steels’; 1997, London, Institute of Materials.
11. 10.1111/j.1365-2818.2007.01814.x10.1111/j.1365-2818.2007.01814.x ↗
12. Gao N. · J. Mater. Sc
13. 10.1093/biomet/45.1-2.22910.1093/biomet/45.1-2.229 ↗
14. Mabuchi H., and Koseki T.: ISIJ Int. 2000, 40, 809–818.10.2355/isijinternational.40.809 ↗
15. Mabuchi H., Uemori R., and Koseki T.: ISIJ Int. 1999, 39, 937–946.10.2355/isijinternational.39.937 ↗
16. Palizdar Y. · Conf. Scr · 2008 · 126 · 012019
17. 10.1179/mst.1992.8.10.84910.1179/mst.1992.8.10.849 ↗