journal article·2011-11

Cast joining of cast iron to aluminium casting matrix

E Moosavi-Khoonsari, F Jalilian, F Paray, D Emadi, R A L Drew

Materials Science and Technology· Volume 27· Issue 11
Publisher page

Abstract

The present study focused on reinforcing Al–Si–Cu alloy with a cast iron insert and using Zn– xAl–3Si–0·5Mg (wt-) intermediate alloys by the cast joining technique to take advantage of lightness and stiffness of the hybrid structure. The experimental set-up consisted of coating the insert using hot dipping method followed by immersing the coated insert into the Al melt and allowing the system to cool down to the room temperature. The quality of Al–Fe joints in terms of morphology, thickness, chemistry and microhardness was evaluated as a function of coating composition and immersion time in the Al melt. Characteristics of reaction layer at the coating/insert interface and its effects on the joint properties were determined using microstructural analysis and thermodynamic calculations. Combination of a suitable coating containing 27 wt-Al and optimised process parameters, including 1 min immersion time, resulted in the formation of an Al–Fe joint with promising characteristics.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Engineering McGill University, Montreal, Que., Canada

Mechanical and Industrial Engineering Concordia University, Montreal, Que., Canada

References (24)

Show source-provided references
1. Jorstad JL, Morley RA, Overbagh WH, Steele GW: US Patent 5,333,668, 1994.
2. Hahn O · DVS-Berichte · 2001 · 218 · 151
3. 10.1007/BF0115307610.1007/BF01153076 ↗
4. 10.1016/S0921-5093(98)00963-010.1016/S0921-5093(98)00963-0 ↗
5. 10.1007/BF0036787310.1007/BF00367873 ↗
6. 10.1016/0301-679X(93)90021-R10.1016/0301-679X(93)90021-R ↗
7. 10.4028/www.scientific.net/MSF.519-521.115710.4028/www.scientific.net/MSF.519-521.1157 ↗
8. ASM International: ‘ASM handbook’, Vol. 3, 294–295; 1992, Materials Park, OH, ASM International.
9. 10.1016/S0921-5093(98)00573-510.1016/S0921-5093(98)00573-5 ↗
10. Jung JP, Lee BY, Kang CS: Proc. Int. Conf. on ‘Trends in welding science and technology’, Gatlinburg, TN, USA, June 1992, ASM International, 1101–1105.
11. 10.2355/isijinternational.43.159610.2355/isijinternational.43.1596 ↗
12. 10.1179/174328409X43908810.1179/174328409X439088 ↗
13. 10.1016/S0079-6425(98)00006-110.1016/S0079-6425(98)00006-1 ↗
14. Horstmann D: ‘Reactions between iron and molten zinc’, 21; 1978, London, Zinc Development Association.
15. Horstman D: Proc. 14th Int. Hot Dip Galvanizing Conf. 6; 1986, London, Zinc Development Association.
16. Guttmann M, Lepretre Y, Aubry Y, Roche M.J, Moreau T, Drillet P, Mataigne JM, Baudin H: Proc. Conf. Galvatech ’95, Chicago, IL, USA, September 1995, Iron and Steel Society, 295.
17. Tang N.-Y · Metall. Mater. Trans. A · 1995 · 26 · 1669
18. 10.1016/j.ndteint.2005.08.00510.1016/j.ndteint.2005.08.005 ↗
19. 10.1016/j.optlastec.2005.08.01410.1016/j.optlastec.2005.08.014 ↗
20. Uchida T, Murotani S, Hagimori K, Abe Y: US Patent 6,270,842, 2001.
21. 10.1016/j.matchar.2006.07.00810.1016/j.matchar.2006.07.008 ↗
22. 10.1016/j.msea.2006.01.08510.1016/j.msea.2006.01.085 ↗
23. 10.1016/S1359-835X(02)00158-610.1016/S1359-835X(02)00158-6 ↗
24. 10.1016/j.msea.2006.11.01710.1016/j.msea.2006.11.017 ↗