journal article·2020-04

Influence of Si content on thermal expansion characteristic of Al–Si alloys

Yu-Mi Kim, Se-Weon Choi, Sung-Kil Hong

Materials Science and Technology· Volume 36· Issue 6
Publisher page

Abstract

The objective of this study was to find out how Si precipitation affects the linear thermal expansion behaviors of Al–Si alloys with various Si content. These Al–Si alloys were manufactured by gravity casting using 99.98 wt-% pure Al and 98.5 wt-% Si pellets. Solution treatment was carried out at 530°C for 10 h for each specimen. As-quenched specimens were subjected to microstructure observation and linear thermal expansion analysis. Si precipitation and additional linear thermal expansion occurred at lower temperature when Si content was increased to 9.5 wt-%. The activation energy of Si precipitation was also lower when Si content was higher. Eutectic Si reduced diffusion distance and acted as a nucleation site of dissolved Si atoms in the Al matrix during aging. These Si phases decreased Si precipitation temperature and activation energy of Si precipitation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Korea Institute of Industrial Technology, Gwangju, South Korea

School of Materials Science & Engineering, Chonnam National University, Gwangju, Republic of Korea

References (35)

Show source-provided references
1. Zolotorevsky VS Belov NA Glazoff MV. Casting aluminum alloys. Elsevier; 2007. DOI:10.1016/B978-008045370-5.50007-9.10.1016/B978-008045370-5.50007-9 ↗
2. JIM. Microstructure and properties of aluminum alloys Japan Institute of light metals Japan 1991.
3. John H.E. Aluminum: properties and physical metallurgy. Materials Pack: ASM International; 2005. DOI:10.1361/apap1984p001.
4. 10.1007/BF0286872910.1007/BF02868729 ↗
5. Varga B Fazakas E Hargitai H Dilatometer study of rapidly solidified aluminium-silicon based alloys. J Phys Conf Ser. 2009; 144; DOI:10.1088/1742-6596/144/1/012105.10.1088/1742-6596/144/1/012105 ↗
6. Davis JR. Aluminum and aluminum alloys 2001. DOI:10.1361/autb2001.
7. Lasagni F, Falahati A, Mohammadian-Semnani H Precipitation of Si revealed by dilatometry in Al-Si-Cu/Mg alloys. Transl Riecansky. 2008; 46:1–6.
8. 10.1361/10599490377034313210.1361/105994903770343132 ↗
9. Chirita G Soares D Silva FS. Advantages of the centrifugal casting technique for the production of structural components with Al-Si alloys. Mater Des. 2008; 29:20–27. DOI:10.1016/j.matdes.2006.12.011.10.1016/j.matdes.2006.12.011 ↗
10. Milkereit B Wanderka N Schick C Continuous cooling precipitation diagrams of Al-Mg-Si alloys. Mater Sci Eng A. 2012; 550:87–96. DOI:10.1016/j.msea.2012.04.033.10.1016/j.msea.2012.04.033 ↗
11. Chaudhury SK Warke V Shankar S Localized recrystallization in cast Al-Si-Mg alloy during solution heat treatment: dilatometric and calorimetric studies. Metall Mater Trans A Phys Metall Mater Sci. 2011; 42:3160–3169. DOI:10.1007/s11661-011-0716-x.10.1007/s11661-011-0716-x ↗
12. Stadler F Antrekowitsch H Fragner W The effect of main alloying elements on the physical properties of Al-Si foundry alloys. Mater Sci Eng A. 2013; 560:481–491. DOI:10.1016/j.msea.2012.09.093.10.1016/j.msea.2012.09.093 ↗
13. Choi SW Cho HS Kumai S. Influence of precipitation on the coefficient of thermal expansion of Al-Si-Mg-Cu-(Ti) alloys. J Alloys Compd. 2016; 655:6–10. DOI:10.1016/j.jallcom.2015.09.207.10.1016/j.jallcom.2015.09.207 ↗
14. Lasagni F Mingler B Dumont M Precipitation kinetics of Si in aluminium alloys. Mater Sci Eng A. 2008; 480:383–391. DOI:10.1016/j.msea.2007.07.008.10.1016/j.msea.2007.07.008 ↗
15. Murray JL McAlister AJ. The Al-Si (Aluminum-Silicon) system. Bull Alloy Phase Diagrams. 1984; 5:74–84. doi:10.1007/BF02868729.10.1007/BF02868729 ↗
16. Kasprzak W Amirkhiz BS Niewczas M. Structure and properties of cast Al–Si based alloy with Zr–V–Ti additions and its evaluation of high temperature performance. J Alloys Compd. 2014; 595:67–79. DOI:10.1016/J.JALLCOM.2013.11.209.10.1016/j.jallcom.2013.11.209 ↗
17. Ma P Jia Y Prashanth KG Effect of Si content on the microstructure and properties of Al–Si alloys fabricated using hot extrusion. J Mater Res. 2017; 32:2210–2217. DOI:10.1557/jmr.2017.97.10.1557/jmr.2017.97 ↗
18. Kissinger HE. Reaction kinetics in differential thermal analysis. Anal Chem. 1957; 29:1702–1706. doi:10.1021/ac60131a045.10.1021/ac60131a045 ↗
19. Laughlin DE Gaskell DR. Introduction to the thermodynamics of materials fifth edition. Taylor & Francis; 2008. DOI:10.1007/0-306-47609-6_1.10.1007/0-306-47609-6_1 ↗
20. Kissinger HE. Variation of peak temperature with heating rate in differential thermal analysis. J Res Natl Bur Stand. 1956; 57:217 DOI:10.6028/jres.057.026.10.6028/jres.057.026 ↗
21. Starink MJ. Kinetic equations for diffusion-controlled precipitation reactions. J Mater Sci. 1997; 32:4061–4070. DOI:10.1023/A:1018649823542.10.1023/A:1018649823542 ↗
22. Starink MJ. The analysis of Al-based alloys by calorimetry: quantitative analysis of reactions and reaction kinetics. Int Mater Rev. 2004; 49:191–226. DOI:10.1179/095066004225010532.10.1179/095066004225010532 ↗
23. Daoudi MI Triki A Redjaimia A. DSC study of the kinetic parameters of the metastable phases formation during non-isothermal annealing of an Al-Si-Mg alloy. J Therm Anal Calorim. 2011; 104:627–633. DOI:10.1007/s10973-010-1099-8.10.1007/s10973-010-1099-8 ↗
24. Vyazovkin S Burnham AK Criado JM ICTAC kinetics committee recommendations for performing kinetic computations on thermal analysis data. Thermochim Acta. 2011; 520:1–19. DOI:10.1016/j.tca.2011.03.034.10.1016/j.tca.2011.03.034 ↗
25. Daoudi MI Triki A Redjaimia A The determination of the activation energy varying with the precipitated fraction of β″ metastable phase in an Al-Si-Mg alloy using non-isothermal dilatometry. Thermochim Acta. 2014; 577:5–10. DOI:10.1016/j.tca.2013.12.007.10.1016/j.tca.2013.12.007 ↗
26. Rosenbaum HS Turnbull D. Metallographic investigation of precipitation of silicon from aluminum. Acta Metall. 1959; 7:664–674. DOI:10.1016/0001-6160(59)90143-9.10.1016/0001-6160(59)90143-9 ↗
27. Shackelford JF. Introduction to Materials Science for Engineers. 3th ed. Macmillan Publishing Company; 2014.
28. 10.1179/026708304X608610.1179/026708304X6086 ↗
29. 10.1016/0036-9748(87)90233-X10.1016/0036-9748(87)90233-X ↗
30. Brown M Gallagher P. Handbook of thermal analysis and calorimetry volume 5 recent advances techniques and applications Elsevier 2008.
31. Porter DA Easterling KE. Phase transformations in metals and alloys. 3rd ed. Taylor & Francis; 2014. DOI:10.1146/annurev.ms.03.080173.001551.10.1146/annurev.ms.03.080173.001551 ↗
32. Bishop M Fletcher KE. Diffusion in aluminium. Int Metall Rev. 1972; 17:203–225. doi:10.1179/imtlr.1972.17.1.203. doi: 10.1179/09506607279013751210.1179/095066072790137512 ↗
33. van Rooyen M Mittemeijer EJ. Precipitation of silicon in aluminum-silicon: a calorimetric analysis of liquid-quenched and solid-quenched alloys. Metall Trans A. 1989; 20:1207–1214. DOI:10.1007/BF02647402.10.1007/BF02647402 ↗
34. Starink MJ Zahra A-M. Kinetics of isothermal and non-isothermal precipitation in an Al-6at%Si alloy. Philos Mag A. 1998; 77:187–199. DOI:10.1080/014186198254696. doi: 10.1080/0141861980821423710.1080/01418619808214237 ↗
35. Perez M. Gibbs-Thomson effects in phase transformations. Scr Mater. 2005; 52:709–712. doi:10.1016/j.scriptamat.2004.12.026.10.1016/j.scriptamat.2004.12.026 ↗