journal article·2018-11Open access

The influence of temperature on deformation-induced martensitic transformation in 301 stainless steel

Yadunandan B. Das, Alexander N. Forsey, Joe Kelleher, Saurabh Kabra, Michael E. Fitzpatrick, Thomas H. Simm, Salih Gungor, Richard J. Moat

Materials Science and Technology· Volume 34· Issue 17

Abstract

Deformation-induced martensitic transformations are increasingly being used to create desirable mechanical properties in steels. Here, the kinetics of the deformation-induced martensitic transformation is investigated at 300, 263, 223, 173 and 100 K using in situ neutron diffraction during tensile loading. The results from these experiments show a distinct change in the transformation behaviour between 300 K and the tests conducted at 263 K and below, causing a difference in martensite structure. The difference in transformation kinetics is correlated to the suppression of slip at low temperatures, as evidenced using diffraction peak intensity analysis for different grain families and corroborated using transmission electron microscopy. A direct correlation between the deformation-induced martensite fraction and the work-hardening rate is shown.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Engineering, The Open University, Walton Hall, UK

Department of Material Science and Engineering, KTH Royal Institute of Technology, Stockholm, Sweden

ISIS facility, Rutherford Appleton Laboratory, Didcot, UK

Faculty of Engineering and Computing, Coventry University, Coventry, UK

College of Engineering, Swansea University, Bay Campus, Swansea, UK

Funding

Lloyd's Register Foundation · Ser Cymru II

References (61)

Show source-provided references
1. 10.1590/S1516-1439200700040000710.1590/S1516-14392007000400007 ↗
2. 10.1016/j.actamat.2016.07.03210.1016/j.actamat.2016.07.032 ↗
3. 10.2355/isijinternational.43.43810.2355/isijinternational.43.438 ↗
4. 10.1016/j.actamat.2012.08.01110.1016/j.actamat.2012.08.011 ↗
5. 10.1007/BF0264593410.1007/BF02645934 ↗
6. Talonen J. Effect strain-induced α’-martensite transformation on mechanical properties of metastable austenitic stainless steels [PhD]. Department of Mechanical Engineering, Helsinki University of Technology; 2007.
7. 10.1007/BF0264204210.1007/BF02642042 ↗
8. Zackay V · ASM Trans Quart · 1967
9. 10.1016/0020-7403(95)00039-Z10.1016/0020-7403(95)00039-Z ↗
10. Bain EC · AIME · 1924 · 70 · 25
11. 10.1016/0001-6160(53)90005-410.1016/0001-6160(53)90005-4 ↗
12. 10.1080/1478643690821778310.1080/14786436908217783 ↗
13. Angel T. · J Iron Steel Inst · 1954 · 177 · 165
14. 10.1016/j.actamat.2010.12.00710.1016/j.actamat.2010.12.007 ↗
15. 10.2355/isijinternational.53.188110.2355/isijinternational.53.1881 ↗
16. 10.1007/s11661-016-3839-210.1007/s11661-016-3839-2 ↗
17. 10.1016/j.matdes.2016.09.05710.1016/j.matdes.2016.09.057 ↗
18. 10.1016/j.scriptamat.2017.04.02010.1016/j.scriptamat.2017.04.020 ↗
19. 10.1016/0001-6160(53)90083-210.1016/0001-6160(53)90083-2 ↗
20. Wayman CM · 1996
21. 10.1016/0001-6160(83)90103-710.1016/0001-6160(83)90103-7 ↗
22. 10.1007/BF0264442710.1007/BF02644427 ↗
23. Bhadeshia H. · 1987
24. 10.1016/j.scriptamat.2006.10.04110.1016/j.scriptamat.2006.10.041 ↗
25. 10.1016/j.actamat.2011.10.01910.1016/j.actamat.2011.10.019 ↗
26. 10.1016/j.actamat.2008.09.04010.1016/j.actamat.2008.09.040 ↗
27. 10.1016/j.actamat.2007.08.04010.1016/j.actamat.2007.08.040 ↗
28. 10.1016/j.msea.2014.09.00810.1016/j.msea.2014.09.008 ↗
29. 10.1016/0022-5088(72)90173-710.1016/0022-5088(72)90173-7 ↗
30. 10.1007/BF0267230110.1007/BF02672301 ↗
31. 10.1016/j.actamat.2007.07.01510.1016/j.actamat.2007.07.015 ↗
32. 10.1016/j.scriptamat.2006.10.00910.1016/j.scriptamat.2006.10.009 ↗
33. Hedström P. Deformation and Martensitic Phase Transformation in Stainless Steels. Doctoral Thesis. Lulea University of Technology. Division of Engineering Materials. 2007.
34. 10.1016/j.actamat.2009.09.05310.1016/j.actamat.2009.09.053 ↗
35. 10.1016/j.actamat.2010.01.05610.1016/j.actamat.2010.01.056 ↗
36. 10.1016/j.actamat.2013.08.04610.1016/j.actamat.2013.08.046 ↗
37. 10.1590/S1516-1439200900030000810.1590/S1516-14392009000300008 ↗
38. Edwards L, Fitzpatrick M, Daymond M, ENGIN-X: a neutron stress diffractometer for the 21st century. Proceedings of the 6th International Conference; 2000.
39. 10.1107/S002188980604224510.1107/S0021889806042245 ↗
40. 10.1063/1.497481510.1063/1.4974815 ↗
41. ASTM. ASTM E8 / E8M – 13a standard test methods for tension testing of metallic materials.
42. Fitzpatrick ME, Lodini A. Analysis of residual stress by diffraction using neutron and synchrotron radiation. 2003.10.1201/9780203608999 ↗
43. 10.1016/j.actamat.2003.08.01710.1016/j.actamat.2003.08.017 ↗
44. Paddea S. · 2013 · 1
45. Harjo S · Sci Rep · 2017 · 7
46. Hutchings MT · Mater Today · 2005 · 8
47. ASTM · ASTM · 2009 · 03 · 1
48. 10.1016/j.scriptamat.2004.03.01110.1016/j.scriptamat.2004.03.011 ↗
49. 10.1007/s11661-006-0130-y10.1007/s11661-006-0130-y ↗
50. 10.1016/j.msea.2003.11.08410.1016/j.msea.2003.11.084 ↗
51. 10.1007/BF0264200310.1007/BF02642003 ↗
52. 10.1016/0001-6160(79)90073-710.1016/0001-6160(79)90073-7 ↗
53. 10.1016/0001-6160(79)90074-910.1016/0001-6160(79)90074-9 ↗
54. 10.1038/srep0614110.1038/srep06141 ↗
55. 10.1007/s11661-005-0003-910.1007/s11661-005-0003-9 ↗
56. Das YB, Simm TH, Forsey AN, An experimental study of plastic deformation and transformation in austenitic stainless steel. 2001. Unpublished work.
57. 10.1016/j.ultramic.2011.08.00210.1016/j.ultramic.2011.08.002 ↗
58. 10.1007/s11661-009-9807-310.1007/s11661-009-9807-3 ↗
59. 10.1016/j.msea.2003.11.07410.1016/j.msea.2003.11.074 ↗
60. 10.1016/S1359-6462(96)00338-710.1016/S1359-6462(96)00338-7 ↗
61. 10.1016/j.ijplas.2016.10.00510.1016/j.ijplas.2016.10.005 ↗