journal article·2011-09

Technique for partially strengthening electrical steel sheet of IPM motor using cavitation peening

O Takakuwa, M Nishikawa, H Soyama

Materials Science and Technology· Volume 27· Issue 9
Publisher page

Abstract

Cavitation peening (CP), which utilises the impact caused by cavitation bubbles collapsing, can improve the fatigue strength of metallic materials as well as the yield stress and tensile strength. The rotor cores in interior permanent magnet motors use electrical steel sheet. In order to increase the permissible rotating speed of the motor and achieve high efficiency, the mechanical strength of the stress concentration area in the steel sheet where the magnet is pressed needs to be enhanced. In the present paper, to improve the yield stress and tensile strength, the steel sheet was peened by CP. The peening effect on these mechanical properties was evaluated by tensile and indentation tests. The experimental results from the tensile tests revealed that CP can increase the yield stress by 22% compared to that before CP. In addition, the yield stress and tensile strength increased along with the CP processing time.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Non-Destructive Testing Techniques · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Nanomechanics, Tohoku University, Aoba 6-6-01, Aramaki, Aoba-ku, Sendai 980-8579, Japan

References (23)

Show source-provided references
1. 10.1109/28.60573810.1109/28.605738 ↗
2. 10.1109/20.90889110.1109/20.908891 ↗
3. 10.1109/20.87780410.1109/20.877804 ↗
4. 10.1109/TEC.2002.80833410.1109/TEC.2002.808334 ↗
5. Khan MASK · IEEE Trans. Ind. Appl. · 2009 · 56 · 85
6. 10.1179/mst.1986.2.1.2210.1179/mst.1986.2.1.22 ↗
7. 10.1016/S0304-8853(00)00005-610.1016/S0304-8853(00)00005-6 ↗
8. Baudoum P · J. Magn. Magn. Mater. · 2003 · 254 · 32
9. 10.1179/174328406X13086710.1179/174328406X130867 ↗
10. 10.1016/j.jmmm.2006.02.15510.1016/j.jmmm.2006.02.155 ↗
11. 10.1016/j.jmmm.2008.03.05410.1016/j.jmmm.2008.03.054 ↗
12. 10.1115/1.144792610.1115/1.1447926 ↗
13. 10.1016/S0142-1123(03)00121-X10.1016/S0142-1123(03)00121-X ↗
14. 10.1007/s11249-004-1774-710.1007/s11249-004-1774-7 ↗
15. 10.1007/s10853-007-1535-810.1007/s10853-007-1535-8 ↗
16. 10.1007/s10853-008-2743-610.1007/s10853-008-2743-6 ↗
17. 10.2355/isijinternational.48.157710.2355/isijinternational.48.1577 ↗
18. Yabumoto M · Nippon Steel Technol. Rep. · 2003 · 87 · 57
19. 10.1109/TIA.2004.82443410.1109/TIA.2004.824434 ↗
20. 10.1154/1.157735510.1154/1.1577355 ↗
21. 10.1080/1478643060082510310.1080/14786430600825103 ↗
22. 10.1016/j.matlet.2007.11.06210.1016/j.matlet.2007.11.062 ↗
23. 10.1016/j.scriptamat.2008.02.05410.1016/j.scriptamat.2008.02.054 ↗