journal article·2014-11

Charpy impact property related to {100} cleavage fracture in 15CrODS steel

S. Ukai, W. Izawa, N. Oono, S. Hayashi, Y. Kohno, S. Ohtsuka, T. Kaito

Materials Science and Technology· Volume 30· Issue 13
Publisher page

Abstract

Based on the former results that delamination along {100} cleavage fracture leads to the improved absorbed energy, {100} cleavage plane was formed in parallel to the rolled plate by recrystallisation and cold roll processing in 15CrODS steel plate. Charpy impact properties were investigated in terms of notch direction against {100} cleavage plane. Notch with normal direction against {100} cleavage plane induced delamination fracture, but provided similar absorbed energy to that of conventional extruded bar. The transverse notch direction against {100} cleavage plane served higher absorbed energy at low temperature. Higher upper shelf energy and lower DBTT were attained in conventional hot extruded bar, which contains any crystallographic planes rotated around <110> axis at the transverse direction. The delamination fracture leading to high absorbed energy is significantly affected by a crystallographic morphology of the {100} cleavage plane perpendicular to transverse plane.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fusion materials and technologies · Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Science and Engineering, Faculty of Engineering, Hokkaido University, N13, W-8, Kita-ku, Sapporo 060-8628, Japan

Muroran Institute of Technology, 27-1, Mizumoto-cho, Muroran 050-8585, Japan

Japan Atomic Energy Agency, 4002 Narita, O-arai, Ibaraki 311-1393, Japan

References (15)

Show source-provided references
1. 10.1146/annurev.matsci.38.060407.13031510.1146/annurev.matsci.38.060407.130315 ↗
2. 10.1016/S0022-3115(02)01043-710.1016/S0022-3115(02)01043-7 ↗
3. 10.1016/j.jnucmat.2005.01.01710.1016/j.jnucmat.2005.01.017 ↗
4. 10.1016/S0920-3796(02)00098-410.1016/S0920-3796(02)00098-4 ↗
5. 10.1016/j.jnucmat.2007.03.14610.1016/j.jnucmat.2007.03.146 ↗
6. 10.1016/j.jnucmat.2008.12.14810.1016/j.jnucmat.2008.12.148 ↗
7. 10.1016/j.jnucmat.2013.04.09110.1016/j.jnucmat.2013.04.091 ↗
8. 10.1016/j.jnucmat.2010.12.06910.1016/j.jnucmat.2010.12.069 ↗
9. 10.1016/j.jnucmat.2012.08.05010.1016/j.jnucmat.2012.08.050 ↗
10. 10.1179/mst.1994.10.9.81310.1179/mst.1994.10.9.813 ↗
11. 10.1016/j.jnucmat.2007.08.00410.1016/j.jnucmat.2007.08.004 ↗
12. 10.1179/1743284714Y.000000055910.1179/1743284714Y.0000000559 ↗
13. 10.1016/j.msea.2012.07.05110.1016/j.msea.2012.07.051 ↗
14. 10.2355/isijinternational.50.15210.2355/isijinternational.50.152 ↗
15. 10.2320/matertrans.M201130110.2320/matertrans.M2011301 ↗