journal article·2013-08

Tempering stability of retained austenite in nanostructured dual phase steels

F Hu, K M Wu, T P Hou, A A Shirzadi

Materials Science and Technology· Volume 29· Issue 8
Publisher page

Abstract

The tempering resistance and stability of retained austenite in superbainitic and quenching–partitioning martensitic steels were investigated over the temperature range of 400 to 700°C. The X-ray diffraction analysis and hardness tests showed that the quenching–partitioning martensitic steel contained a considerable amount of retained austenite (26·6 vol.-) and had a relatively high hardness up to 556 HV1 after tempering at ∼600°C. In contrast, the fraction of retained austenite and hardness of superbainitic steel were considerably lower (24·5 vol.- and 385 HV1) after the same tempering cycle. The present work also showed that the quenching–partitioning steel had a higher tempering stability, probably due to the higher fraction of carbon rich retained austenite.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Material Properties and Failure Mechanisms

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

International Research Institute for Steel Technology Wuhan University of Science and Technology, Wuhan 430081, China

Department of Materials Science and Metallurgy University of Cambridge, Pembroke Street, Cambridge CB2 3QZ, UK

Department of Engineering and Innovation The Open University, Milton Keynes MK7 6AA, UK

References (26)

Show source-provided references
1. Bhadeshia HKDH: Proc. 1st Int. Symp. on ‘Steel science’, (, Tsuzaki K), Paper 17; 2007, Tokyo, The Iron and Steel Institute of Japan.
2. 10.4028/www.scientific.net/MSF.500-501.49510.4028/www.scientific.net/MSF.500-501.495 ↗
3. 10.1016/j.actamat.2006.08.03310.1016/j.actamat.2006.08.033 ↗
4. 10.1016/j.actamat.2009.12.02010.1016/j.actamat.2009.12.020 ↗
5. 10.2355/isijinternational.43.123810.2355/isijinternational.43.1238 ↗
6. 10.1179/02670830122500072510.1179/026708301225000725 ↗
7. 10.2355/isijinternational.43.182110.2355/isijinternational.43.1821 ↗
8. 10.2355/isijinternational.45.173610.2355/isijinternational.45.1736 ↗
9. 10.1016/j.msea.2006.02.13310.1016/j.msea.2006.02.133 ↗
10. 10.1016/S1359-6454(03)00059-410.1016/S1359-6454(03)00059-4 ↗
11. 10.1016/j.cossms.2004.09.00310.1016/j.cossms.2004.09.003 ↗
12. 10.1179/026708309X1251274415416210.1179/026708309X12512744154162 ↗
13. Streicher AM, Speer JG, Matlock DK, de Cooman BC: Proc. Int. Conf. on ‘Advanced high strength sheet steels for automotive applications’, (, Speer J G), Paper 51; 2004, Winter Park, CO, AIST.
14. Zhong N: ‘Research on high strength Q&P and Q-P-T Steel’, PhD thesis, Shanghai Jiao Tong University, Shanghai, China, 2009.
15. ‘J-MatPro 4·0’, http://www.cntech.com.cn/product/JMatPro.html
16. 10.1016/0001-6160(65)90061-110.1016/0001-6160(65)90061-1 ↗
17. Lindström A: ‘Austempered high silicon steel – investigation of wear resistance in a carbide free microstructure’, Master thesis, Luleå University of Technology, Luleå, Sweden, 2006.
18. 10.1179/mst.1991.7.8.68610.1179/mst.1991.7.8.686 ↗
19. Bigg TD · Mater. Sci. Forum · 2010 · 654
20. Bigg TD · Diffus. Defect Data B · 2011 · 172
21. Peet M, Bhadeshia HKDH: ‘Materials algorithms project’, www.msm.cam.ac.uk/map/steel/tar/mucg83.exe
22. 10.1016/0001-6160(80)90082-610.1016/0001-6160(80)90082-6 ↗
23. 10.1016/0001-6160(59)90170-110.1016/0001-6160(59)90170-1 ↗
24. 10.2355/isijinternational.39.81310.2355/isijinternational.39.813 ↗
25. Wang CY: ‘Investigation on 30 GPa grade ultrahigh-strength martensitic–austenitic steels’, PhD thesis, Central Iron & Steel Research Institute, Beijing, China, 2010.
26. 10.1007/s11661-009-9854-910.1007/s11661-009-9854-9 ↗