Single sided single pass submerged arc welding of austenitic stainless steel
Source abstract
Abstract
The weld metal produced from a series of high productivity welds of 316LN austenitic stainless steel plate was examined to evaluate the effects of the use of a higher heat input process (>2˙5 kJ mm-1). This high heat input process was aimed at maximising single sided weld metal penetration in a single pass using simple square edge preparations and minimising time consuming handling operations. The evaluation was undertaken by correlating the local microstructure with the local toughness and microhardness of the cap, middle and root of the weld. It was established that the intermetallic phases/carbides present did not appear to have a significantly adverse effect on either corrosion or toughness. The phases observed and confirmed by the use of selected area electron diffraction (SAED) were predominantly χ with some σ. No identifications were made of M23C6 observed in other studies of 316LN welds. A series of impact tests with variations in the notch positions showed that the thickness of the δ ferrite had an effect on the weld metal toughness. As a result of the present work it was established that similar volume fractions of δ ferrite did not necessarily produce similar levels of weld metal toughness, but ferrite thickness did appear to have a contributory effect. Welding of 316LN stainless steel with a single sided single pass submerged arc welding process was satisfactorily undertaken up to 20 mm plate thickness without preheat or post-weld heat treatment. The ability to achieve this resulted in significant economic savings within the process for ship panel production combined with satisfactory weld metal properties.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. 10.1179/imr.1993.38.1.2510.1179/imr.1993.38.1.25 ↗
2. 10.1007/BF0264765910.1007/BF02647659 ↗
3. Marshall P. ‘Austenitic stainless steels — microstructure and mechanical properties’; 1984, London, Elsevier Applied Science Publishers.
4. 10.1179/stw.2000.5.1.3510.1179/stw.2000.5.1.35 ↗
5. 10.1016/S0924-0136(02)00466-110.1016/S0924-0136(02)00466-1 ↗
6. Grong O. ‘Metallurgical modelling of welding’, 533; 1997, London, The Institute of Materials.
7. Ahblom B. · Met. Re · 1982 · 1
8. Schaeffler A. L. · Met. Frog · 1949 · 56 · 680
9. Delong W. T., Ostrom G., and Szumachowski E.: Weld. 1, 1956, 35, 521s-528s.
10. 10.1016/S0924-0136(03)00430-810.1016/S0924-0136(03)00430-8 ↗
11. Honeycombe J., Gooch T. G., and Barlow J. A.: in ‘New developments stainless steel technology’, (ed.Lula R. A.), 319-340; 1984, Metals Park, OH, ASM International.
12. Gladman T., and Pickering F. B.: in ‘Yield, flow and fracture of polycrystals’, (ed.Baker T. N.), 188-198; 1983, London, Applied Science Publishers.
13. ASM: ‘Fatigue and fracture’, Vol. 19, 737148; 1996, Metals Park, OH, ASM International.
14. Suutala N., and Mosio T. ‘Solidification technology in the foundry and cast house’, 310-314; 1980, Coventry, Warwick.
15. 10.1179/13621710010153845210.1179/136217100101538452 ↗
16. Bfickle H. · Met. Rev · 1959 · 4 · 50
17. 10.1007/BF0266480910.1007/BF02664809 ↗
18. 10.1179/stw.2001.6.6.41210.1179/stw.2001.6.6.412 ↗
19. 10.2355/isijinternational.36.139210.2355/isijinternational.36.1392 ↗
20. 10.1179/msc.1977.11.6.20810.1179/msc.1977.11.6.208 ↗