Characterisation of detonation sprayed Mo–Co–Cr–B alloy coatings
Source abstract
Abstract
A novel thermal spray material of Mo–Co–Cr–B with high durability in molten alloys has been developed to utilise for die casting parts and for galvanising bath parts. In the present paper, detonation gun (D gun) spray technique was used to deposit a Mo–Co–Cr–B alloy coating onto 316L stainless steel substrate, and the microstructures and mechanical properties of the coating system were studied using XRD, SEM, tensile test and Vickers microhardness. The results show that the microstructures of the coating consisted of ternary transition metal borides matrix CoMo2B2, CoMoB, as well as a little amount of binary borides, MoB and CrB. The ternary borides matrix contained both amorphous phase and nanocrystalline grains with a size of 60±35 nm. The bond strength of the coating decreases with increasing thickness of the as sprayed coatings. The anisotropy in the mechanical properties between the cross-section and plan section of the coatings is examined. Comparing the microhardness and bond strength of detonation sprayed Mo–Co–Cr–B coating with those of HVOF sprayed Mo–Co–Cr–B coating, it can be concluded that the detonation spray process has a better performance than HVOF spray process.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · High-Temperature Coating Behaviors · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Metal Matrix CompositesShanghai Jiao Tong University, Shanghai 200240, China
State Key Laboratory of Metal Matrix CompositesShanghai Jiao Tong University, Shanghai 200240, China;, Email: junwang@sjtu.edu.cn
Baoshan Iron and Steel Co., Ltd, Shanghai 201900, China
References (21)
Show source-provided references
1. Brunnock M. S. · Ironmaking Steelmaking · 1997 · 24 · 40
2. Mizuno H. · Proc. Int. Thermal Spray Conf. and Expo., Basel, Switzerland, May 2005, ASM International, · 80
3. Mizuno H., Kitamura J., Tawada S., and Itsukaichi T.: Proc. 1st Asian Thermal Spray Conf., Nagoya, Japan, November 2005, Asian Thermal Spray Committee,81–82.
4. 10.1007/s11666-007-9046-310.1007/s11666-007-9046-3 ↗
5. Richard C. · Proc. Int. Thermal Spray Conf. and Expo., Orlando, FL, USA, June 1992, ASM International, · 11
6. Kim Y. C., Terasaki T., and North T. H.: Proc. 4th Natl Thermal Spray Conf., Pittsburgh, PA, USA, May 1992, ASM International,221–227.
7. Ahn H. S., and Roylance B. J.: Tribol Int. 1992, 25, 227–236.10.1016/0301-679X(92)90060-Z ↗
8. Lin C. K., Leigh S. H., and Berndt C. C.: Proc. 14th Int. Thermal Spray Conf., Kobe, Japan, May 1995, High Temperature Society of Japan,903–908.
9. 10.1016/0025-5416(87)90409-510.1016/0025-5416(87)90409-5 ↗
10. Kadyrov E. · Adv. Mater. Process · 1995 · 8 · 21
11. 10.1080/1042691990891481710.1080/10426919908914817 ↗
12. 10.1179/mst.1986.2.3.20710.1179/mst.1986.2.3.207 ↗
13. 10.1016/S0921-5093(98)01000-410.1016/S0921-5093(98)01000-4 ↗
14. 10.1016/S0257-8972(96)03077-010.1016/S0257-8972(96)03077-0 ↗
15. Lee Y.K., Kim H.J., and Chang R.W.: Proc. 15th Int. Thermal Spray Conf., Nice, France, May 1998, ASM International,1629–1634.10.31399/asm.cp.itsc1998p1629 ↗
16. Shmyreva T. · Russ. Metall · 1983 · 6 · 166
17. 10.1016/S0257-8972(01)00996-310.1016/S0257-8972(01)00996-3 ↗
18. 10.2320/matertrans1989.36.86610.2320/matertrans1989.36.866 ↗
19. 10.2320/matertrans1989.36.142710.2320/matertrans1989.36.1427 ↗
20. Johnson W. L. · Mater. Sci. Forum · 1996 · 35 · 225
21. 10.1063/1.11972510.1063/1.119725 ↗